From: Hien Dang <hien.dang...@renesas.com>
This patch adds an implementation that saves and restores the state of
GPIO configuration on suspend and resume.
Signed-off-by: Hien Dang <hien.dang...@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara...@renesas.com>
[Modify structure of the bank info to simplify a saving registers]
[Remove DEV_PM_OPS macro]
Signed-off-by: Yoshihiro Kaneko <ykaneko0...@gmail.com>
---
This patch is based on the for-next branch of linux-gpio tree.
v2 [Yoshihiro Kaneko]
* Modify structure of the bank info as suggested by Geert Uytterhoeven
v3 [Yoshihiro Kaneko]
* Remove DEV_PM_OPS macro as suggested by Vladimir Zapolskiy
v4 [Yoshihiro Kaneko]
* As suggested by Geert Uytterhoeven
- make the name of all members of gpio_rcar_bank_info accord with the
name of the registers
- fix type of the 'offset' variable in unsigned int
- fix the inverted logic in gpio_rcar_resume()
drivers/gpio/gpio-rcar.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index e76de57..e5b0dbe 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -31,6 +31,16 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
+struct gpio_rcar_bank_info {
+ u32 iointsel;
+ u32 inoutsel;
+ u32 outdt;
+ u32 posneg;
+ u32 edglevel;
+ u32 bothedge;
+ u32 intmsk;
+};
+
struct gpio_rcar_priv {
void __iomem *base;
spinlock_t lock;
@@ -41,6 +51,7 @@ struct gpio_rcar_priv {
unsigned int irq_parent;
bool has_both_edge_trigger;
bool needs_clk;
+ struct gpio_rcar_bank_info bank_info;
};
#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
@@ -531,11 +542,66 @@ static int gpio_rcar_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpio_rcar_suspend(struct device *dev)
+{
+ struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+
+ p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
+ p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
+ p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
+ p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
+ p->bank_info.posneg = gpio_rcar_read(p, POSNEG);
+ p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL);
+ if (p->has_both_edge_trigger)
+ p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE);
+
+ return 0;
+}
+
+static int gpio_rcar_resume(struct device *dev)
+{
+ struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+ unsigned int offset;
+ u32 mask;
+
+ for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
+ mask = BIT(offset);
+ /* I/O pin */
+ if (!(p->bank_info.iointsel & mask)) {
+ if (p->bank_info.inoutsel & mask)
+ gpio_rcar_direction_output(
+ &p->gpio_chip, offset,
+ !!(p->bank_info.outdt & mask));
+ else
+ gpio_rcar_direction_input(&p->gpio_chip,
+ offset);
+ } else {
+ /* Interrupt pin */
+ gpio_rcar_config_interrupt_input_mode(
+ p,
+ offset,
+ !(p->bank_info.posneg & mask),
+ !(p->bank_info.edglevel & mask),
+ !!(p->bank_info.bothedge & mask));
+
+ if (p->bank_info.intmsk & mask)
+ gpio_rcar_write(p, MSKCLR, mask);
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP*/
+
+static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend,
gpio_rcar_resume);
+
static struct platform_driver gpio_rcar_device_driver = {
.probe = gpio_rcar_probe,
.remove = gpio_rcar_remove,
.driver = {
.name = "gpio_rcar",
+ .pm = &gpio_rcar_pm_ops,
.of_match_table = of_match_ptr(gpio_rcar_of_table),
}
};
--
1.9.1
