Define the V3M Starter Kit board dependent part of the DU and LVDS device
nodes. Also add the device nodes for the Analog Devices ADV7511W HDMI
transmitter -- it's actually connected to the LVDS output via an LVDS
decoder (deliberately omitted here since there's no driver yet anyway).
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.bari...@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 106 +++++++++++++++++++++++++
1 file changed, 106 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -29,6 +29,41 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ osc5_clk: osc5-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ vcc_d1p8v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_d3p3v: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
};
&avb {
@@ -42,6 +77,13 @@
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&osc5_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -50,6 +92,70 @@
clock-frequency = <32768>;
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39{
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc_d1p8v>;
+ dvdd-supply = <&vcc_d1p8v>;
+ pvdd-supply = <&vcc_d1p8v>;
+ bgvdd-supply = <&vcc_d1p8v>;
+ dvdd-3v-supply = <&vcc_d3p3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+};
+
+&pfc {
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+};
+
&scif0 {
status = "okay";
};
