[PATCH 1/3] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder

[Jacopo Mondi]

Document Thine THC63LVD1024 LVDS decoder.

Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
---
 .../bindings/display/bridge/thine,thc63lvd1024.txt | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt

diff --git 
a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt 
b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
new file mode 100644
index 0000000..53b6453
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -0,0 +1,59 @@
+THine Electronics THC63LVD1024 LVDS receiver
+--------------------------------------------
+
+The THC63LVD1024 is an LVDS receiver designed to convert multiple LVDS streams
+to digital CMOS/TTL parallel data.
+
+Required properties:
+- compatible: Shall be one of the following:
+  "thine,thc63lvd1024",
+  "lvds-decoder"
+
+Optional properties:
+- supply-vcc: Power supply for TTL output and digital circuitry
+- supply-cvcc: Power supply for TTL CLOCKOUT signal
+- supply-lvcc: Power supply for LVDS inputs
+- supply-pvcc: Power supply for PLL circuitry
+- pwnd-gpio: Power down GPIO signal. Active low.
+- oe-gpio: Output enable GPIO signal. Active high.
+
+The THC63LVD1024 has two video ports, whose connections are modeled according
+to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
+
+- Port@0: LVDS input port
+- Port@1: Digital CMOS/TTL parallel output
+
+Example:
+-------
+
+       lvds_decoder: decoder-0 {
+               compatible = "thine,thc63lvd1024";
+
+               vcc-supply = <&reg_lvds_vcc>;
+               lvcc-supply = <&reg_lvds_lvcc>;
+
+               pwdn-gpio = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               lvds_dec_in: endpoint {
+                                       remote-endpoint = <&lvds_out>;
+                               };
+                       };
+
+                       port@1{
+                               reg = <1>;
+
+                               lvds_dec_out: endpoint {
+                                       remote-endpoint = <&adv7511_in>;
+                               };
+
+                       };
+
+               };
+       };
-- 
2.7.4