On 07/03/18 23:04, Niklas Söderlund wrote:
> There was never proper support in the VIN driver to deliver ALTERNATING
> field format to user-space, remove this field option. The problem is
> that ALTERNATING field order requires the sequence numbers of buffers
> returned to userspace to reflect if fields where dropped or not,
where -> were
With that tiny typo fixed you can add my:
Reviewed-by: Hans Verkuil <hans.verk...@cisco.com>
Regards,
Hans
> something which is not possible with the VIN drivers capture logic.
>
> The VIN driver can still capture from a video source which delivers
> frames in ALTERNATING field order, but needs to combine them using the
> VIN hardware into INTERLACED field order. Before this change if a source
> was delivering fields using ALTERNATE the driver would default to
> combining them using this hardware feature. Only if the user explicitly
> requested ALTERNATE field order would incorrect frames be delivered.
>
> The height should not be cut in half for the format for TOP or BOTTOM
> fields settings. This was a mistake and it was made visible by the
> scaling refactoring. Correct behavior is that the user should request a
> frame size that fits the half height frame reflected in the field
> setting. If not the VIN will do its best to scale the top or bottom to
> the requested format and cropping and scaling do not work as expected.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> ---
> drivers/media/platform/rcar-vin/rcar-dma.c | 15 +----------
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 40
> +++++++----------------------
> 2 files changed, 10 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> b/drivers/media/platform/rcar-vin/rcar-dma.c
> index fd14be20a6604d7a..c8831e189d362c8b 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -617,7 +617,6 @@ static int rvin_setup(struct rvin_dev *vin)
> case V4L2_FIELD_INTERLACED_BT:
> vnmc = VNMC_IM_FULL | VNMC_FOC;
> break;
> - case V4L2_FIELD_ALTERNATE:
> case V4L2_FIELD_NONE:
> if (vin->continuous) {
> vnmc = VNMC_IM_ODD_EVEN;
> @@ -757,18 +756,6 @@ static int rvin_get_active_slot(struct rvin_dev *vin,
> u32 vnms)
> return 0;
> }
>
> -static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
> -{
> - if (vin->format.field == V4L2_FIELD_ALTERNATE) {
> - /* If FS is set it's a Even field */
> - if (vnms & VNMS_FS)
> - return V4L2_FIELD_BOTTOM;
> - return V4L2_FIELD_TOP;
> - }
> -
> - return vin->format.field;
> -}
> -
> static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t
> addr)
> {
> const struct rvin_video_format *fmt;
> @@ -941,7 +928,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
> goto done;
>
> /* Capture frame */
> - vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
> + vin->queue_buf[slot]->field = vin->format.field;
> vin->queue_buf[slot]->sequence = sequence;
> vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index ebcd78b1bb6e8cb6..b76d59be64e0132d 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -121,33 +121,6 @@ static int rvin_reset_format(struct rvin_dev *vin)
> vin->format.colorspace = mf->colorspace;
> vin->format.field = mf->field;
>
> - /*
> - * If the subdevice uses ALTERNATE field mode and G_STD is
> - * implemented use the VIN HW to combine the two fields to
> - * one INTERLACED frame. The ALTERNATE field mode can still
> - * be requested in S_FMT and be respected, this is just the
> - * default which is applied at probing or when S_STD is called.
> - */
> - if (vin->format.field == V4L2_FIELD_ALTERNATE &&
> - v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
> - vin->format.field = V4L2_FIELD_INTERLACED;
> -
> - switch (vin->format.field) {
> - case V4L2_FIELD_TOP:
> - case V4L2_FIELD_BOTTOM:
> - case V4L2_FIELD_ALTERNATE:
> - vin->format.height /= 2;
> - break;
> - case V4L2_FIELD_NONE:
> - case V4L2_FIELD_INTERLACED_TB:
> - case V4L2_FIELD_INTERLACED_BT:
> - case V4L2_FIELD_INTERLACED:
> - break;
> - default:
> - vin->format.field = RVIN_DEFAULT_FIELD;
> - break;
> - }
> -
> rvin_reset_crop_compose(vin);
>
> vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
> @@ -233,15 +206,20 @@ static int __rvin_try_format(struct rvin_dev *vin,
> switch (pix->field) {
> case V4L2_FIELD_TOP:
> case V4L2_FIELD_BOTTOM:
> - case V4L2_FIELD_ALTERNATE:
> - pix->height /= 2;
> - source->height /= 2;
> - break;
> case V4L2_FIELD_NONE:
> case V4L2_FIELD_INTERLACED_TB:
> case V4L2_FIELD_INTERLACED_BT:
> case V4L2_FIELD_INTERLACED:
> break;
> + case V4L2_FIELD_ALTERNATE:
> + /*
> + * Driver dose not (yet) support outputting ALTERNATE to a
> + * userspace. It does support outputting INTERLACED so use
> + * the VIN hardware to combine the two fields.
> + */
> + pix->field = V4L2_FIELD_INTERLACED;
> + pix->height *= 2;
> + break;
> default:
> pix->field = RVIN_DEFAULT_FIELD;
> break;
>
