Add the (previously omitted) EtherAVB pin data to the V3M Starter Kit
board's device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
The patch is against the 'renesas-devel-20180314-v4.16-rc5' tag of Simon's
'renesas.git repo. It depends on the R8A77970 PFC driver patch adding EtherAVB
pin groups (posted yesterday) in order to work properly...
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -32,6 +32,9 @@
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@@ -52,6 +55,11 @@
};
&pfc {
+ avb_pins: avb0 {
+ groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+ function = "avb0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
