On Thu, 2018-04-12 at 15:12 +0200, Geert Uytterhoeven wrote: > Hi Sinan, > > On Thu, Apr 12, 2018 at 2:36 PM, Sinan Kaya <ok...@codeaurora.org> wrote: > > On 4/12/2018 7:49 AM, Auger Eric wrote: > > > On 12/04/18 13:32, Geert Uytterhoeven wrote: > > > > On Thu, Apr 12, 2018 at 12:31 PM, Auger Eric <eric.au...@redhat.com> > > > > wrote: > > > > > On 11/04/18 11:15, Geert Uytterhoeven wrote: > > > > > > Vfio-platform requires reset support, provided either by ACPI, or, > > > > > > on DT > > > > > > platforms, by a device-specific reset driver matching against the > > > > > > device's compatible value. > > > > > > > > > > > > On many SoCs, devices are connected to an SoC-internal reset > > > > > > controller. > > > > > > If the reset hierarchy is described in DT using "resets" properties, > > > > > > such devices can be reset in a generic way through the reset > > > > > > controller > > > > > > subsystem. Hence add support for this, avoiding the need to write > > > > > > device-specific reset drivers for each single device on affected > > > > > > SoCs. > > > > > > > > > > > > Devices that do require a more complex reset procedure can still > > > > > > provide > > > > > > a device-specific reset driver, as that takes precedence. > > > > > > > > > > > > Note that this functionality depends on CONFIG_RESET_CONTROLLER=y, > > > > > > and > > > > > > becomes a no-op (as in: "No reset function found for device") if > > > > > > reset > > > > > > controller support is disabled. > > > > > > > > > > > > Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be> > > > > > > Reviewed-by: Philipp Zabel <p.za...@pengutronix.de> > > > > > > --- a/drivers/vfio/platform/vfio_platform_common.c > > > > > > +++ b/drivers/vfio/platform/vfio_platform_common.c > > > > > > @@ -127,8 +130,16 @@ static int vfio_platform_get_reset(struct > > > > > > vfio_platform_device *vdev) > > > > > > vdev->of_reset = > > > > > > vfio_platform_lookup_reset(vdev->compat, > > > > > > > > > > > > &vdev->reset_module); > > > > > > } > > > > > > + if (vdev->of_reset) > > > > > > + return 0; > > > > > > + > > > > > > + rstc = of_reset_control_get_exclusive(vdev->device->of_node, > > > > > > NULL); > > > > > > > > > > Shouldn't we prefer the top level reset_control_get_exclusive()? > > > > > > > > I guess that should work, too. > > > > > > > > > To make sure about the exclusive/shared terminology, does > > > > > get_reset_control_get_exclusive() check we have an exclusive wire > > > > > between this device and the reset controller? > > > > > > > > AFAIU, the "exclusive" means that only a single user can obtain access > > > > to > > > > the reset, and it does not guarantee that we have an exclusive wire > > > > between > > > > the device and the reset controller. > > > > > > > > The latter depends on the SoC's reset topology. If a reset wire is > > > > shared > > > > by multiple devices (e.g. resets shared by PWM or Display Unit devices > > > > on > > > > R-Car SoCs), exporting a subset of these devices to a guest is a bad > > > > idea, > > > > indeed. > > > > > > So who's going to check this assigned device will not trigger a reset of > > > other non assigned devices sharing the same reset controller?
If the reset control is requested as exclusive, any other driver requesting the same reset control will fail (or this reset_control_get will fail, whichever comes last). > > I like the direction in general. I was hoping that you'd call it > > of_reset_control > > rather than reset_control. > > You mean vfio_platform_device.of_reset_control? > If we switch to reset_control_get_exclusive(), that doesn't make much sense... > > > Is there anything in the OF spec about what to expect from DT's reset? > > Documentation/devicetree/bindings/reset/reset.txt says: > > "A word on where to place reset signal consumers in device tree: It is > possible > in hardware for a reset signal to affect multiple logically separate HW > blocks > at once. In this case, it would be unwise to represent this reset signal in > the DT node of each affected HW block, since if activated, an unrelated block > may be reset. Instead, reset signals should be represented in the DT node > where it makes most sense to control it; this may be a bus node if all > children of the bus are affected by the reset signal, or an individual HW > block node for dedicated reset signals. The intent of this binding is to give > appropriate software access to the reset signals in order to manage the HW, > rather than to slavishly enumerate the reset signal that affects each HW > block." This was written in 2012, and unfortunately the DT binding documentation does not inform hardware development, and has not been updated since. There's generally two kinds of reset uses: - either to bring a device into a known state at a given point in time, which is often done using a timed assert/deassert sequence, - or just to park a device while not in active use (must deassert any time beforeĀ use, may or may not assert any time after use) For the former case, the above paragraph makes a lot of sense, because when it is necessary to reset a device that shares the reset line with another, either choice between disturbing the other device, or not being able to reset when necessary, is a bad one. The reset controller framework supports those use cases via the reset_control_get_exclusive function variants. But for the latter case, there is absolutely no need to forbid sharing reset lines among multiple devices, as deassertion/assertion can just be handled reference counted, like clocks or power management. The reset controller framework supports those use cases via the reset_control_get_shared function variants. The case we are talking about here is the first one. > So according to the bindings, a specific reset should apply to a single > device only. Indeed sharing reset lines between peripherals has become unexpectedly common, making it impractical to forbid shared resets in the device tree. > A quick check shows there are several violators: > > $ for i in $(git grep -lw resets -- "*dts*"); do grep -w resets $i | > sort | uniq -c | sed -e "s@^@$i:@g"; done | grep -v ": 1 " > arch/arm/boot/dts/aspeed-g4.dtsi: 14 resets = <&syscon ASPEED_RESET_I2C>; > arch/arm/boot/dts/aspeed-g5.dtsi: 14 resets = <&syscon ASPEED_RESET_I2C>; > arch/arm/boot/dts/atlas7.dtsi: 2 resets = <&car 29>; > arch/arm/boot/dts/gemini.dtsi: 2 resets = <&syscon GEMINI_RESET_IDE>; > arch/arm/boot/dts/meson8.dtsi: 2 resets = <&reset RESET_USB_OTG>; > arch/arm/boot/dts/meson8b.dtsi: 2 resets = <&reset RESET_USB_OTG>; > arch/arm/boot/dts/r8a7743.dtsi: 7 resets = <&cpg 523>; > arch/arm/boot/dts/r8a7743.dtsi: 2 resets = <&cpg 703>; > arch/arm/boot/dts/r8a7743.dtsi: 2 resets = <&cpg 704>; > arch/arm/boot/dts/r8a7745.dtsi: 7 resets = <&cpg 523>; > arch/arm/boot/dts/r8a7745.dtsi: 2 resets = <&cpg 703>; > arch/arm/boot/dts/r8a7745.dtsi: 2 resets = <&cpg 704>; > arch/arm/boot/dts/r8a7790.dtsi: 3 resets = <&cpg 703>; > arch/arm/boot/dts/r8a7790.dtsi: 2 resets = <&cpg 704>; > arch/arm/boot/dts/r8a7791.dtsi: 2 resets = <&cpg 703>; > arch/arm/boot/dts/r8a7791.dtsi: 2 resets = <&cpg 704>; > arch/arm/boot/dts/r8a7794.dtsi: 2 resets = <&cpg 703>; > arch/arm/boot/dts/r8a7794.dtsi: 2 resets = <&cpg 704>; > arch/arm/boot/dts/stih410.dtsi: 2 resets = <&powerdown > STIH407_USB2_PORT0_POWERDOWN>, > arch/arm/boot/dts/stih410.dtsi: 2 resets = <&powerdown > STIH407_USB2_PORT1_POWERDOWN>, > arch/arm/boot/dts/stih410.dtsi: 2 resets = <&softreset > STIH407_PICOPHY_SOFTRESET>, > arch/arm/boot/dts/stih418.dtsi: 2 resets = <&powerdown > STIH407_USB2_PORT0_POWERDOWN>, > arch/arm/boot/dts/stih418.dtsi: 2 resets = <&powerdown > STIH407_USB2_PORT1_POWERDOWN>, > arch/arm/boot/dts/stih418.dtsi: 2 resets = <&softreset > STIH407_PICOPHY_SOFTRESET>, > arch/arm/boot/dts/sun9i-a80.dtsi: 2 resets = <&de_clocks RST_FE0>; > arch/arm/boot/dts/sun9i-a80.dtsi: 2 resets = <&usb_clocks RST_USB0_HCI>; > arch/arm/boot/dts/sun9i-a80.dtsi: 2 resets = <&usb_clocks RST_USB2_HCI>; > arch/arm/boot/dts/sunxi-h3-h5.dtsi: 2 resets = <&ccu > RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; > arch/arm/boot/dts/sunxi-h3-h5.dtsi: 2 resets = <&ccu > RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; > arch/arm/boot/dts/sunxi-h3-h5.dtsi: 2 resets = <&ccu > RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; > arch/arm/boot/dts/sunxi-h3-h5.dtsi: 2 resets = <&ccu > RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; > arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi: 2 resets = <&reset > RESET_USB_OTG>; > arch/arm64/boot/dts/nvidia/tegra186.dtsi: 2 resets = <&bpmp > TEGRA186_RESET_DSI>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 3 resets = <&cpg 328>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 7 resets = <&cpg 523>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 3 resets = <&cpg 700>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 3 resets = <&cpg 701>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 3 resets = <&cpg 702>; > arch/arm64/boot/dts/renesas/r8a7795.dtsi: 3 resets = <&cpg 703>; > arch/arm64/boot/dts/renesas/r8a7796.dtsi: 3 resets = <&cpg 328>; > arch/arm64/boot/dts/renesas/r8a7796.dtsi: 7 resets = <&cpg 523>; > arch/arm64/boot/dts/renesas/r8a7796.dtsi: 3 resets = <&cpg 702>; > arch/arm64/boot/dts/renesas/r8a7796.dtsi: 3 resets = <&cpg 703>; > arch/arm64/boot/dts/renesas/r8a77965.dtsi: 3 resets = <&cpg 328>; > arch/arm64/boot/dts/renesas/r8a77965.dtsi: 7 resets = <&cpg 523>; > arch/arm64/boot/dts/renesas/r8a77965.dtsi: 2 resets = <&cpg 702>; > arch/arm64/boot/dts/renesas/r8a77965.dtsi: 4 resets = <&cpg 703>; > arch/arm64/boot/dts/renesas/r8a77995.dtsi: 4 resets = <&cpg 523>; > arch/arm64/boot/dts/renesas/r8a77995.dtsi: 3 resets = <&cpg 703>; > $ > > Perhaps we should start grouping devices sharing a reset signal in a > "simple-bus" node? > > Phillip: any comments? For some of those it may be possible, but that is basically just a work- around for reality not matching expectations. There may be other cases where devices sharing a reset line are not even in the same parent node because they are controlled via a different bus. In general, I don't think it is feasible or desirable to force grouping of devices that share the same reset line into a common parent node. My suggestion would be to relax the language in the reset.txt DT bindings doc. regards Philipp