On Thu, Apr 26, 2018 at 6:19 PM, Phil Edworthy <phil.edwor...@renesas.com> wrote:
> The DesignWare GPIO IP can be configured for either 1 interrupt or 1 > per GPIO in port A, but the driver currently only supports 1 interrupt. > See the DesignWare DW_apb_gpio Databook description of the > 'GPIO_INTR_IO' parameter. > > This change allows the driver to work with up to 32 interrupts, it will > get as many interrupts as specified in the DT 'interrupts' property. > It doesn't do anything clever with the different interrupts, it just calls > the same handler used for single interrupt hardware. > > ACPI companion code provided by Hoan Tran <hot...@apm.com>. This was tested > on X-Gene by Hoan. > > Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com> > Reviewed-by: Rob Herring <r...@kernel.org> > Acked-by: Lee Jones <lee.jo...@linaro.org> Patch applied for v4.18 with Hoan's ACK. Yours, Linus Walleij
