On Wed, Apr 11, 2018 at 11:01 AM, jacopo mondi <jac...@jmondi.org> wrote:
> Hello Kaneko-san,
>
> On Tue, Apr 03, 2018 at 09:43:02PM +0900, Yoshihiro Kaneko wrote:
>> This series adds thermal support for r8a77995.
>> R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2.
>> Therefore this series adds r8a77995 support to rcar_thermal driver not
>> rcar_gen3_thermal driver.
>
> I tested this on D3 Draak.
>
> I generated load expecting the detected temperature to rise.
>
> It took a while, and I only see a slight increase of the temperature
> reported by the 'temp' attribute.

Pointing a heat gun at the SoC, I managed to get the temperature up to
80000, and it went back to 40000 when I removed it. I'd say this
works.

Tested-By: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>

CU
Uli

Reply via email to