On Wed, May 23, 2018 at 09:52:44AM +0100, Phil Edworthy wrote:
> Treat DT and ACPI the same as much as possible. Note that we can't use
> platform_get_irq() to get the DT interrupts as they are in the port
> sub-node and hence do not have an associated platform device.
> 
> This also fixes a problem introduced with error checking when calling
> platform_get_irq().

What is the problem? In general I think fixes should be in separate
patches.

> 
> Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com>
> ---
>  drivers/gpio/gpio-dwapb.c | 53 
> ++++++++++++++++++++---------------------------
>  1 file changed, 22 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> index 7dcd06b..15b4154 100644
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -444,7 +444,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
>               int i;
>  
>               for (i = 0; i < pp->ngpio; i++) {
> -                     if (pp->irq[i])
> +                     if (pp->irq[i] >= 0)
>                               irq_set_chained_handler_and_data(pp->irq[i],
>                                               dwapb_irq_handler, gpio);
>               }
> @@ -562,7 +562,7 @@ dwapb_gpio_get_pdata(struct device *dev)
>       struct dwapb_platform_data *pdata;
>       struct dwapb_port_property *pp;
>       int nports;
> -     int i;
> +     int i, j;
>  
>       nports = device_get_child_node_count(dev);
>       if (nports == 0)
> @@ -580,6 +580,8 @@ dwapb_gpio_get_pdata(struct device *dev)
>  
>       i = 0;
>       device_for_each_child_node(dev, fwnode)  {
> +             struct device_node *np = NULL;
> +
>               pp = &pdata->properties[i++];
>               pp->fwnode = fwnode;
>  
> @@ -599,46 +601,35 @@ dwapb_gpio_get_pdata(struct device *dev)
>                       pp->ngpio = 32;
>               }
>  
> +             pp->irq_shared  = false;
> +             pp->gpio_base   = -1;
> +
>               /*
>                * Only port A can provide interrupts in all configurations of
>                * the IP.
>                */
> -             if (dev->of_node && pp->idx == 0 &&
> -                     fwnode_property_read_bool(fwnode,
> -                                               "interrupt-controller")) {
> -                     struct device_node *np = to_of_node(fwnode);
> -                     unsigned int j;
> -
> -                     /*
> -                      * The IP has configuration options to allow a single
> -                      * combined interrupt or one per gpio. If one per gpio,
> -                      * some might not be used.
> -                      */
> -                     for (j = 0; j < pp->ngpio; j++) {
> -                             int irq = of_irq_get(np, j);
> -                             if (irq < 0)
> -                                     continue;
> -
> -                             pp->irq[j] = irq;
> -                             pp->has_irq = true;
> -                     }
> +             if (pp->idx != 0)
> +                     continue;
>  
> -                     if (!pp->has_irq)
> -                             dev_warn(dev, "no irq for port%d\n", pp->idx);
> +             if (dev->of_node && fwnode_property_read_bool(fwnode,
> +                                               "interrupt-controller")) {
> +                     np = to_of_node(fwnode);
>               }
>  
> -             if (has_acpi_companion(dev) && pp->idx == 0) {
> -                     unsigned int j;
> +             for (j = 0; j < pp->ngpio; j++) {
> +                     pp->irq[j] = -ENXIO;
>  
> -                     for (j = 0; j < pp->ngpio; j++) {
> +                     if (np)
> +                             pp->irq[j] = of_irq_get(np, j);
> +                     else if (has_acpi_companion(dev))
>                               pp->irq[j] = 
> platform_get_irq(to_platform_device(dev), j);
> -                             if (pp->irq[j])
> -                                     pp->has_irq = true;
> -                     }
> +
> +                     if (pp->irq[j] >= 0)
> +                             pp->has_irq = true;
>               }
>  
> -             pp->irq_shared  = false;
> -             pp->gpio_base   = -1;
> +             if (!pp->has_irq)
> +                     dev_warn(dev, "no irq for port%d\n", pp->idx);
>       }
>  
>       return pdata;
> -- 
> 2.7.4
> 

Reply via email to