On Wed, Jun 13, 2018 at 01:54:51AM +0200, Marek Vasut wrote: > On 06/11/2018 03:59 PM, Bjorn Helgaas wrote: > > On Sun, Jun 10, 2018 at 03:57:10PM +0200, Marek Vasut wrote: > >> On 11/17/2017 06:49 PM, Lorenzo Pieralisi wrote: > >>> On Fri, Nov 10, 2017 at 10:58:42PM +0100, Marek Vasut wrote: > >>>> From: Phil Edworthy <phil.edwor...@renesas.com> > >>>> > >>>> Most PCIe host controllers support L0s and L1 power states via ASPM. > >>>> The R-Car hardware only supports L0s, so when the system suspends and > >>>> resumes we have to manually handle L1. > >>>> When the system suspends, cards can put themselves into L1 and send a > >>> > >>> I assumed L1 entry has to be negotiated depending upon the PCIe > >>> hierarchy capabilities, I would appreciate if you can explain to > >>> me what's the root cause of the issue please. > >> > >> You should probably ignore the suspend/resume part altogether. The issue > >> here is that the cards can enter L1 state, while the controller won't do > >> that automatically, it can only detect that the link went into L1 state. > >> If that happens,the driver must manually put the controller to L1 state. > >> The controller can transition out of L1 state automatically though. > > > > From earlier discussion I thought the R-Car root port did not > > advertise L1 support. > > Which discussion ? This one or somewhere else ?
https://lkml.kernel.org/r/hk2pr0601mb1393d917d343e6363484ca68f5...@hk2pr0601mb1393.apcprd06.prod.outlook.com Re-reading that, I think I see my misunderstanding. I was only considering L1 in the ASPM context. I didn't realize the L1 implications of devices being in states other than D0. Obviously L1 support for ASPM is optional and advertised via Link Capabilities. But per PCIe r4.0, sec 5.2, L1 support is required for PCI-PM compatible power management, and is entered "whenever all Functions ... are programmed to a D-state other than D0." So I guess this means *every* device is supposed to support L1 when it is in a non-D0 power state. I think *this* is the case you're solving. A little more of this detail, e.g., that this issue has nothing to do with ASPM, it's probably an R-Car erratum that the RC can't transition from L1 to L0, etc., in the changelog would really help clear things up for me. > > If that's the case, we shouldn't enable L1 > > entry on a card. Is the core ASPM code doing something wrong here? > > I can double-check, am I looking for some particular register in the > PCIe space ? > > >>>> PM_ENTER_L1 DLLP to the host controller. At this point, we can no longer > >>>> access the card's config registers. > >>>> > >>>> The R-Car host controller will handle taking cards out of L1 as long as > >>>> the host controller has also been transitioned to L1 link state. > >>> > >>> I wonder why this can't be done in a PM restore hook but that's not > >>> really where my question is. > >> > >> I suspect because the link can be in L1 during startup too? > >> > >>>> Ideally, we would detect the PM_ENTER_L1 DLLP using an interrupt and > >>>> transition the host to L1 immediately. However, this patch just ensures > >>>> that we can talk to cards after they have gone into L1. > >>> > >>>> When attempting a config access, it checks to see if the card has gone > >>>> into L1, and if so, does the same for the host controller. > >>>> > >>>> This is based on a patch by Hien Dang <hien.dang...@rvc.renesas.com> > >>>> > >>>> Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com> > >>>> Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> > >>>> Cc: Geert Uytterhoeven <geert+rene...@glider.be> > >>>> Cc: Phil Edworthy <phil.edwor...@renesas.com> > >>>> Cc: Simon Horman <horms+rene...@verge.net.au> > >>>> Cc: Wolfram Sang <w...@the-dreams.de> > >>>> Cc: linux-renesas-soc@vger.kernel.org > >>>> --- > >>>> V2: - Drop extra parenthesis > >>>> - Use GENMASK() > >>>> - Fix comment "The HW will handle coming of of L1.", s/of of/out of/ > >>>> --- > >>>> drivers/pci/host/pcie-rcar.c | 24 ++++++++++++++++++++++++ > >>>> 1 file changed, 24 insertions(+) > >>>> > >>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > >>>> index ab61829db389..068bf9067ec1 100644 > >>>> --- a/drivers/pci/host/pcie-rcar.c > >>>> +++ b/drivers/pci/host/pcie-rcar.c > >>>> @@ -92,6 +92,13 @@ > >>>> #define MACCTLR 0x011058 > >>>> #define SPEED_CHANGE BIT(24) > >>>> #define SCRAMBLE_DISABLE BIT(27) > >>>> +#define PMSR 0x01105c > >>>> +#define L1FAEG BIT(31) > >>>> +#define PM_ENTER_L1RX BIT(23) > >>>> +#define PMSTATE GENMASK(18, 16) > >>>> +#define PMSTATE_L1 GENMASK(17, 16) > >>>> +#define PMCTLR 0x011060 > >>>> +#define L1_INIT BIT(31) > >>>> #define MACS2R 0x011078 > >>>> #define MACCGSPSETR 0x011084 > >>>> #define SPCNGRSN BIT(31) > >>>> @@ -191,6 +198,7 @@ static int rcar_pcie_config_access(struct rcar_pcie > >>>> *pcie, > >>>> unsigned int devfn, int where, u32 *data) > >>>> { > >>>> int dev, func, reg, index; > >>>> + u32 val; > >>>> > >>>> dev = PCI_SLOT(devfn); > >>>> func = PCI_FUNC(devfn); > >>>> @@ -232,6 +240,22 @@ static int rcar_pcie_config_access(struct rcar_pcie > >>>> *pcie, > >>>> if (pcie->root_bus_nr < 0) > >>>> return PCIBIOS_DEVICE_NOT_FOUND; > >>>> > >>>> + /* > >>>> + * If we are not in L1 link state and we have received > >>>> PM_ENTER_L1 DLLP, > >>>> + * transition to L1 link state. The HW will handle coming out > >>>> of L1. > >>>> + */ > >>>> + val = rcar_pci_read_reg(pcie, PMSR); > >>>> + if (val & PM_ENTER_L1RX && (val & PMSTATE) != PMSTATE_L1) { > >>>> + rcar_pci_write_reg(pcie, L1_INIT, PMCTLR); > >>>> + > >>>> + /* Wait until we are in L1 */ > >>>> + while (!(val & L1FAEG)) > >>>> + val = rcar_pci_read_reg(pcie, PMSR); > >>>> + > >>>> + /* Clear flags indicating link has transitioned to L1 */ > >>>> + rcar_pci_write_reg(pcie, L1FAEG | PM_ENTER_L1RX, PMSR); > >>>> + } > >>> > >>> I do not get why you need to add the DLLP check for _every_ given config > >>> access and how/why it is just related to suspend/resume and not eg cold > >>> boot (I supposed it is because devices can enter L1 upon suspend(?)), I > >>> would ask you please to provide a thorough explanation so that I can > >>> actually review this patch (the commit log must be rewritten nonetheless, > >>> I do not think it is clear, at least it is not for me). > >> > >> See above > >> > >> -- > >> Best regards, > >> Marek Vasut > > > -- > Best regards, > Marek Vasut