Hi Geert, On 11 July 2018 13:39, Geert Uytterhoeven wrote: > On Wed, Jul 11, 2018 at 2:30 PM Phil Edworthy wrote: > > The RZ/N1 UART is a modified Synopsys DesignWare UART. > > The modifications only relate to DMA so you could actually use the > > controller with the Synopsys compatible string if you are not using > > DMA, but you should not do so. > > > > Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com> > > Thanks for your patch! > > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt > > @@ -0,0 +1,10 @@ > > +Renesas RZ/N1 UART > > + > > +This controller is based on the Synopsys DesignWare ABP UART and > > +inherits all properties defined in snps-dw-apb-uart.txt except for the > compatible property. > > + > > +Required properties: > > +- compatible : The device specific string followed by the generic RZ/N1 > string. > > + Therefore it must be one of: > > + "renesas,uart-r9a06g032", "renesas,uart-rzn1" > > "renesas,r9a06g032-uart", "renesas,rzn1-uart" > > > + "renesas,uart-r9a06g033", "renesas,uart-rzn1" > > "renesas,r9a06g033-uart", "renesas,rzn1-uart" I followed the renesas convention of renesas,peripheral-device that is used for most R-Car drivers, but happy to change.
> I assume you plan to describe the DMA-related properties later? Yes, it will take a while to sort out. Thanks Phil
