The Salvator-X and XS boards have a 4 lines DIP switch and 3 push
buttons connected to SoC GPIOs, meant to be used as general-purpose test
keys. Add a corresponding node in DT, mapping (semi-randomly) the DIP
switch to keys 1-4 and the push buttons to keys A-C.
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 63 ++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 7d3d866a0063..77d626baa9f3 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -29,6 +29,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
aliases {
@@ -86,6 +87,63 @@
};
};
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW4-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW4-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW4-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW4-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-a {
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_A>;
+ label = "TSW0";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_B>;
+ label = "TSW1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_C>;
+ label = "TSW2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
@@ -567,6 +625,11 @@
function = "intc_ex";
};
+ keys_pins: keys {
+ pins = "GP_5_17", "GP_5_20", "GP_5_22";
+ bias-pull-up;
+ };
+
pwm1_pins: pwm1 {
groups = "pwm1_a";
function = "pwm1";
--
Regards,
Laurent Pinchart
