On Fri, Aug 17, 2018 at 3:53 PM Kieran Bingham
<kieran.bingham+rene...@ideasonboard.com> wrote:
> On 12/08/18 14:31, Eugeniu Rosca wrote:
> > According to R-Car Gen3 HW manual rev1.00, R-Car M3-N has two CAN
> > interfaces, similar to H3, M3-W and other SoCs from the same family.
> >
> > Add CAN placeholder nodes to avoid below DTC errors:
> > Error: arch/arm64/boot/dts/renesas/ulcb-kf.dtsi:19.1-6 Label or path can0
> > not found
> > Error: arch/arm64/boot/dts/renesas/ulcb-kf.dtsi:25.1-6 Label or path can1
> > not found
> >
> > These errors occur *after* the addition of r8a77965-m3nulcb-kf.dts.
> > Fix them beforehand.
> >
> > CAN support is inspired from below commits:
> > - v4.7 commit 308b7e4ba62e ("arm64: dts: r8a7795: Add CAN support")
> > - v4.11 commit 909c16252415 ("arm64: dts: r8a7796: Add CAN support")
> > - v4.12 commit bec0948e810f ("arm64: dts: r8a7796: Add reset control
> > properties")
> >
> > Signed-off-by: Eugeniu Rosca <ero...@de.adit-jv.com>
>
> Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
>
>
> > ---
> > Changes in v2:
> > - [Kieran Bingham] Improved commit description:
> > - Referenced the newer HW manual rev1.00 instead of rev0.55E.
> > - Kept the "true story" behind the patch. Just made it more clear.
> > - [Geert Uytterhoeven] Replaced CAN0 and CAN1 nodes with placeholders
> > (no CAN testing was done to validate the DTS configuration).
> > ---
> > arch/arm64/boot/dts/renesas/r8a77965.dtsi | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> > b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> > index 486aecacb22a..4da479d3c226 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> > @@ -656,6 +656,22 @@
> > status = "disabled";
> > };
> >
> > + can0: can@e6c30000 {
> > + compatible = "renesas,can-r8a77965",
> > + "renesas,rcar-gen3-can";
> > + reg = <0 0xe6c30000 0 0x1000>;
> > + /* placeholder */
> > + status = "disabled";
> > + };
>
> This is probably more detail than is needed for a placeholder, but it
> looks correct so I think this is fine.
Indeed. Adding the "compatible" properties means they're no longer
placeholders, and will be probed by the driver, possibly leading to
undefined behavior.
Hence please limit the placeholders to the absolute required minimum,
and thus drop the "compatible" and "status" properties.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
