From: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards.
R-Car E3 Ebisu board connects the ID pin to the SoC, so this adds
a group "usb0_id" into usb0_pins node. Also, to use SW15 pin 3 side,
this patch adds vbus0_usb2 node on r8a77990-ebisu.dts.
R-Car D3 Draak board doesn't connect the ID pin, so this adds
"renesas,no-otg-pins" property into usb2_phy0 node.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 21 +++++++++++-
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 45 ++++++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 8 +++++
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 45 ++++++++++++++++++++++++++
4 files changed, 118 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index ff428a64341c..038664e0cdcb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -128,6 +128,17 @@
regulator-always-on;
};
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS_CN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -188,6 +199,7 @@
};
&ehci0 {
+ dr_mode = "otg";
status = "okay";
};
@@ -195,6 +207,11 @@
clock-frequency = <48000000>;
};
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -295,6 +312,7 @@
};
&ohci0 {
+ dr_mode = "otg";
status = "okay";
};
@@ -322,7 +340,7 @@
};
usb0_pins: usb {
- groups = "usb0_b";
+ groups = "usb0_b", "usb0_id";
function = "usb0";
};
@@ -359,6 +377,7 @@
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
+ vbus-supply = <&vbus0_usb2>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index a945db3c4644..8c9d7faa9e65 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -357,6 +357,51 @@
resets = <&cpg 407>;
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a77990",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 704>, <&cpg 703>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a77990-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a77990-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 2405eaad0296..48bb1d77744f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -179,6 +179,7 @@
};
&ehci0 {
+ dr_mode = "host";
status = "okay";
};
@@ -186,6 +187,11 @@
clock-frequency = <48000000>;
};
+&hsusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@@ -337,6 +343,7 @@
};
&ohci0 {
+ dr_mode = "host";
status = "okay";
};
@@ -445,6 +452,7 @@
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
+ renesas,no-otg-pins;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 214f4954b321..8530d9fc1371 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -344,6 +344,51 @@
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a77995",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 704>, <&cpg 703>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a77995-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a77995-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77995-canfd",
"renesas,rcar-gen3-canfd";
--
2.11.0
