On Wed, Jun 19, 2019 at 12:48:17PM +0000, Fabrizio Castro wrote:
> Hi Laurent,
>
> > From: linux-renesas-soc-ow...@vger.kernel.org
> > <linux-renesas-soc-ow...@vger.kernel.org> On Behalf Of Laurent Pinchart
> > Sent: 19 June 2019 13:42
> > Subject: Re: [PATCH 3/3] arm64: dts: renesas: hihope-common: Add HDMI
> > support
> >
> > Hi Fabrizio,
> >
> > Thank you for the patch.
> >
> > On Tue, Jun 18, 2019 at 04:18:39PM +0100, Fabrizio Castro wrote:
> > > Add HDMI support to the HiHope RZ/G2[MN] mother board common
> > > dtsi.
> > >
> > > Signed-off-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
> > >
> > > ---
> > > Please note that this patch was tested with a 4K monitor and cma=96M
> > >
> > > arch/arm64/boot/dts/renesas/hihope-common.dtsi | 62
> > > ++++++++++++++++++++++++++
> > > 1 file changed, 62 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > index 625c3aa..e7568e1 100644
> > > --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > @@ -17,6 +17,18 @@
> > > stdout-path = "serial0:115200n8";
> > > };
> > >
> > > + hdmi0-out {
> > > + compatible = "hdmi-connector";
> > > + label = "HDMI0 OUT";
> >
> > Is the label physically present on the device (printed on the board or
> > the case) ?
>
> I am afraid it's not. Shall I send a v2? Or perhaps Simon could take it out
> while applying?
Thanks,
I have removed the label attribute when queuing this patch up for v5.3.
The result is as follows:
From: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
Date: Tue, 18 Jun 2019 16:18:39 +0100
Subject: [PATCH] arm64: dts: renesas: hihope-common: Add HDMI support
Add HDMI support to the HiHope RZ/G2[MN] mother board common
dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
---
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 61 ++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 625c3aaead14..9f05e80cee10 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -17,6 +17,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -82,6 +93,30 @@
states = <3300000 1
1800000 0>;
};
+
+ x302_clk: x302-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x304_clk: x304-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+ status = "okay";
};
&ehci0 {
@@ -109,11 +144,37 @@
};
};
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
&hsusb {
dr_mode = "otg";
status = "okay";
};
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ versaclock5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ };
+};
+
&ohci0 {
status = "okay";
};
--
2.11.0
