[PATCH 19/22] ARM: dts: rza2mevb: Add input switch

[Simon Horman]

From: Chris Brandt <chris.bra...@renesas.com>

Add support for input switch SW3 on the Renesas RZ/A2M EVB
development board.

Note that this uses the IRQ interrupt, as the RZ/A2 GPIO controller
does not include interrupt support

Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
---
 arch/arm/boot/dts/r7s9210-rza2mevb.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts 
b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index 49c40065741b..d062d02865e7 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "r7s9210.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
 
 / {
@@ -26,6 +27,21 @@
                stdout-path = "serial0:115200n8";
        };
 
+       keyboard {
+               compatible = "gpio-keys";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&keyboard_pins>;
+
+               key-3 {
+                       interrupt-parent = <&irqc>;
+                       interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+                       linux,code = <KEY_3>;
+                       label = "SW3";
+                       wakeup-source;
+               };
+       };
+
        lbsc {
                #address-cells = <1>;
                #size-cells = <1>;
@@ -121,6 +137,10 @@
                         <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
        };
 
+       keyboard_pins: keyboard {
+               pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>;    /* IRQ0 */
+       };
+
        /* Serial Console */
        scif4_pins: serial4 {
                pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,    /* TxD4 */
-- 
2.11.0