Hi,

Looks good but I'm afraid it's more difficult to find pin
configuration from typo.

On Fri, May 28, 2010 at 2:56 PM, Ben Dooks <ben-li...@fluff.org> wrote:
> Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to
> use the recently introduced s3c_gpio_cfgpin_range().
>
> Signed-off-by: Ben Dooks <ben-li...@fluff.org>
> ---
>  arch/arm/mach-s5p6442/dev-audio.c |   30 ++++++++++--------------------
>  arch/arm/mach-s5p6442/dev-spi.c   |    4 +---
>  2 files changed, 11 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/mach-s5p6442/dev-audio.c 
> b/arch/arm/mach-s5p6442/dev-audio.c
> index cb801e1..0e57caf 100644
> --- a/arch/arm/mach-s5p6442/dev-audio.c
> +++ b/arch/arm/mach-s5p6442/dev-audio.c
> @@ -21,22 +21,16 @@
>
>  static int s5p6442_cfg_i2s(struct platform_device *pdev)
>  {
> +       unsigned int base;
> +
>        /* configure GPIO for i2s port */
>        switch (pdev->id) {
>        case 1:
> -               s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
> +               base = S5P6442_GPC1(0);
>                break;
>
>        case -1:
> -               s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
> +               base = S5P6442_GPC0(0);
>                break;
>
>        default:
> @@ -44,6 +38,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
>                return -EINVAL;
>        }
>
> +       s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
>        return 0;
>  }
>
> @@ -111,21 +106,15 @@ struct platform_device s5p6442_device_iis1 = {
>
>  static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
>  {
> +       unsigned int base;
> +
>        switch (pdev->id) {
>        case 0:
> -               s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
> +               base = S5P6442_GPC0(0);
>                break;
>
>        case 1:
> -               s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
> -               s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
> +               base = S5P6442_GPC1(0);
>                break;
>
>        default:
> @@ -133,6 +122,7 @@ static int s5p6442_pcm_cfg_gpio(struct platform_device 
> *pdev)
>                return -EINVAL;
>        }
>
> +       s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
>        return 0;
>  }
>
> diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
> index 3019952..1c5c170 100644
> --- a/arch/arm/mach-s5p6442/dev-spi.c
> +++ b/arch/arm/mach-s5p6442/dev-spi.c
> @@ -37,9 +37,7 @@ static int s5p6442_spi_cfg_gpio(struct platform_device 
> *pdev)
>  {
>        switch (pdev->id) {
>        case 0:
> -               s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
> -               s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
> +               s3c_gpio_cfgpin_range(S5P6442_GPB(0), 4, S3C_GPIO_SFN(2));

Where's the GPB(1)???

Thank you,
Kyungmin Park

>                s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
>                s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
>                s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
> --
> 1.6.3.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" 
> in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to