Supports all bpp modes.

The PRTCON register is used to disable in-hardware updates of registers
that store start and end addresses of framebuffer memory. This prevents
display corruption in case we do not make it before VSYNC with updating
them atomically. With this feature there is no need to wait for a VSYNC
interrupt before each such update.

Signed-off-by: Pawel Osciak <p.osc...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
 arch/arm/plat-samsung/include/plat/regs-fb.h |    5 ++
 drivers/video/s3c-fb.c                       |   71 ++++++++++++++++++++++++++
 2 files changed, 76 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h 
b/arch/arm/plat-samsung/include/plat/regs-fb.h
index ac10013..f454e32 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -112,6 +112,11 @@
 #define VIDCON2_ORGYCbCr                       (1 << 8)
 #define VIDCON2_YUVORDCrCb                     (1 << 7)
 
+/* PRTCON (S3C6410, S5PC100) */
+
+#define PRTCON                                 (0x0c)
+#define PRTCON_PROTECT                         (1 << 11)
+
 /* VIDTCON0 */
 
 #define VIDTCON0_VBPDE_MASK                    (0xff << 24)
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 59ac76a..4f3680d 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -71,6 +71,7 @@ struct s3c_fb;
  * @buf_end: Offset of buffer end registers.
  * @osd: The base for the OSD registers.
  * @palette: Address of palette memory, or 0 if none.
+ * @has_prtcon: Set if has PRTCON register.
  */
 struct s3c_fb_variant {
        unsigned int    is_2443:1;
@@ -85,6 +86,8 @@ struct s3c_fb_variant {
        unsigned short  osd;
        unsigned short  osd_stride;
        unsigned short  palette[S3C_FB_MAX_WIN];
+
+       unsigned int    has_prtcon:1;
 };
 
 /**
@@ -379,6 +382,9 @@ static int s3c_fb_set_par(struct fb_info *info)
 
        info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
 
+       info->fix.xpanstep = info->var.xres_virtual > info->var.xres ? 1 : 0;
+       info->fix.ypanstep = info->var.yres_virtual > info->var.yres ? 1 : 0;
+
        /* disable the window whilst we update it */
        writel(0, regs + WINCON(win_no));
 
@@ -735,6 +741,66 @@ static int s3c_fb_blank(int blank_mode, struct fb_info 
*info)
        return 0;
 }
 
+/**
+ * s3c_fb_pan_display() - Pan the display.
+ *
+ * Note that the offsets can be written to the device at any time, as their
+ * values are latched at each vsync automatically. This also means that only
+ * the last call to this function will have any effect on next vsync, but
+ * there is no need to sleep waiting for it to prevent tearing.
+ *
+ * @var: The screen information to verify.
+ * @info: The framebuffer device.
+ */
+static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
+                             struct fb_info *info)
+{
+       struct s3c_fb_win *win  = info->par;
+       struct s3c_fb *sfb      = win->parent;
+       void __iomem *buf       = sfb->regs + win->index * 8;
+       unsigned int start_byte_offset, end_byte_offset;
+
+       /* Offset in bytes to the start of the displayed area */
+       start_byte_offset = var->yoffset * info->fix.line_length;
+       /* X offset depends on the current bpp */
+       if (info->var.bits_per_pixel >= 8) {
+               start_byte_offset +=
+                       var->xoffset * (info->var.bits_per_pixel >> 3);
+       } else {
+               switch (info->var.bits_per_pixel) {
+               case 4:
+                       start_byte_offset += var->xoffset >> 1;
+                       break;
+               case 2:
+                       start_byte_offset += var->xoffset >> 2;
+                       break;
+               case 1:
+                       start_byte_offset += var->xoffset >> 3;
+                       break;
+               default:
+                       dev_err(sfb->dev, "invalid bpp\n");
+                       return -EINVAL;
+               }
+       }
+       /* Offset in bytes to the end of the displayed area */
+       end_byte_offset = start_byte_offset + var->yres * info->fix.line_length;
+
+       /* Temporarily turn off per-vsync update from shadow registers until
+        * both start and end addresses are updated to prevent corruption */
+       if (sfb->variant.has_prtcon)
+               writel(PRTCON_PROTECT, sfb->regs + PRTCON);
+
+       writel(info->fix.smem_start + start_byte_offset,
+               buf + sfb->variant.buf_start);
+       writel(info->fix.smem_start + end_byte_offset,
+               buf + sfb->variant.buf_end);
+
+       if (sfb->variant.has_prtcon)
+               writel(0, sfb->regs + PRTCON);
+
+       return 0;
+}
+
 static struct fb_ops s3c_fb_ops = {
        .owner          = THIS_MODULE,
        .fb_check_var   = s3c_fb_check_var,
@@ -744,6 +810,7 @@ static struct fb_ops s3c_fb_ops = {
        .fb_fillrect    = cfb_fillrect,
        .fb_copyarea    = cfb_copyarea,
        .fb_imageblit   = cfb_imageblit,
+       .fb_pan_display = s3c_fb_pan_display,
 };
 
 /**
@@ -1243,6 +1310,8 @@ static struct s3c_fb_driverdata s3c_fb_data_64xx 
__devinitdata = {
                        [3] = 0x320,
                        [4] = 0x340,
                },
+
+               .has_prtcon     = 1,
        },
        .win[0] = &s3c_fb_data_64xx_wins[0],
        .win[1] = &s3c_fb_data_64xx_wins[1],
@@ -1271,6 +1340,8 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pc100 
__devinitdata = {
                        [3] = 0x3000,
                        [4] = 0x3400,
                },
+
+               .has_prtcon     = 1,
        },
        .win[0] = &s3c_fb_data_64xx_wins[0],
        .win[1] = &s3c_fb_data_64xx_wins[1],
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to