Marek Szyprowski wrote:
>
> Add required platform definitions for s3c-hsotg driver to enable usb
> gadget support on Samsung Goni board.
>
> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> arch/arm/mach-s5pv210/Kconfig | 1 +
> arch/arm/mach-s5pv210/mach-goni.c | 4 ++++
> 2 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index b1f671d..f8bac5a 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -85,6 +85,7 @@ config MACH_GONI
> select S3C_DEV_HSMMC2
> select S3C_DEV_I2C1
> select S5P_DEV_ONENAND
> + select S3C_DEV_USB_HSOTG
> select SAMSUNG_DEV_KEYPAD
> select S5PV210_SETUP_FB_24BPP
> select S5PV210_SETUP_I2C1
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-
> goni.c
> index 5677c4d..68e22f2 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -41,6 +41,7 @@
> #include <plat/iic.h>
> #include <plat/keypad.h>
> #include <plat/sdhci.h>
> +#include <plat/clock.h>
>
> /* Following are default values for UCON, ULCON and UFCON UART registers
*/
> #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> @@ -569,6 +570,7 @@ static struct platform_device *goni_devices[]
__initdata = {
> &s3c_device_fb,
> &s5p_device_onenand,
> &goni_spi_gpio,
> + &s3c_device_usb_hsotg,
> &goni_i2c_gpio_pmic,
> &goni_device_gpiokeys,
> &s5p_device_fimc0,
> @@ -614,6 +616,8 @@ static void __init goni_machine_init(void)
> samsung_keypad_set_platdata(&keypad_data);
>
> platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
> +
> + clk_xusbxti.rate = 24000000;
> }
>
> MACHINE_START(GONI, "GONI")
> --
Ok...will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
