Kyungmin Park wrote: > > From: Kyungmin Park <kyungmin.p...@samsung.com> > > As it's default configuration for each SoC, Move to the machine config. > > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > --- > arch/arm/Kconfig | 3 +++ > arch/arm/mach-s5pc100/Kconfig | 1 - > arch/arm/mach-s5pv210/Kconfig | 1 - > arch/arm/mach-s5pv310/Kconfig | 1 - > 4 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index d10099d..4da2d18 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -711,6 +711,7 @@ config ARCH_S5PC100 > select HAVE_S3C2410_I2C > select HAVE_S3C_RTC > select HAVE_S3C2410_WATCHDOG > + select PLAT_S5P > help > Samsung S5PC100 series based systems > > @@ -725,6 +726,7 @@ config ARCH_S5PV210 > select HAVE_S3C2410_I2C > select HAVE_S3C_RTC > select HAVE_S3C2410_WATCHDOG > + select PLAT_S5P > help > Samsung S5PV210/S5PC110 series based systems > > @@ -735,6 +737,7 @@ config ARCH_S5PV310 > select GENERIC_GPIO > select HAVE_CLK > select GENERIC_CLOCKEVENTS > + select PLAT_S5P > help > Samsung S5PV310 series based systems > > diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig > index 77ae4bf..b8fbf2f 100644 > --- a/arch/arm/mach-s5pc100/Kconfig > +++ b/arch/arm/mach-s5pc100/Kconfig > @@ -9,7 +9,6 @@ if ARCH_S5PC100 > > config CPU_S5PC100 > bool > - select PLAT_S5P > select S5P_EXT_INT > select S3C_PL330_DMA > help > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig > index 97e4f11..6ddc232 100644 > --- a/arch/arm/mach-s5pv210/Kconfig > +++ b/arch/arm/mach-s5pv210/Kconfig > @@ -11,7 +11,6 @@ if ARCH_S5PV210 > > config CPU_S5PV210 > bool > - select PLAT_S5P > select S3C_PL330_DMA > select S5P_EXT_INT > help > diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig > index ec8b350..4839fef 100644 > --- a/arch/arm/mach-s5pv310/Kconfig > +++ b/arch/arm/mach-s5pv310/Kconfig > @@ -11,7 +11,6 @@ if ARCH_S5PV310 > > config CPU_S5PV310 > bool > - select PLAT_S5P > help > Enable S5PV310 CPU support > > --
Yes, you're right. But just removing 'select PLAT_S5P' from each CPU_S5PXXXX is enough. Because PLAT_S5P is selected if select ARCH_S5PXXXX in the plat-s5p/Kconfig So no need to add 'select PLAT_S5P' into ARCH_S5PXXXX config. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene....@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
