Kamil, I have a question about MFC state FINISHING & FINISHED as below.
> -----Original Message----- > From: linux-media-ow...@vger.kernel.org [mailto:linux-media- > ow...@vger.kernel.org] On Behalf Of Kamil Debski > Sent: Saturday, January 08, 2011 1:26 AM > To: linux-me...@vger.kernel.org; linux-samsung-soc@vger.kernel.org > Cc: m.szyprow...@samsung.com; pa...@osciak.com; kyungmin.p...@samsung.com; > k.deb...@samsung.com; jaeryul...@samsung.com; kgene....@samsung.com > Subject: [RFC/PATCH v6 3/4] MFC: Add MFC 5.1 V4L2 driver > > Multi Format Codec 5.1 is capable of handling a range of video codecs > and this driver provides V4L2 interface for video decoding. > > Signed-off-by: Kamil Debski <k.deb...@samsung.com> > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > --- > drivers/media/video/Kconfig | 8 + > drivers/media/video/Makefile | 1 + > drivers/media/video/s5p-mfc/Makefile | 3 + > drivers/media/video/s5p-mfc/regs-mfc5.h | 335 +++++ > drivers/media/video/s5p-mfc/s5p_mfc.c | 2072 > ++++++++++++++++++++++++++ > drivers/media/video/s5p-mfc/s5p_mfc_common.h | 224 +++ > drivers/media/video/s5p-mfc/s5p_mfc_ctrls.h | 173 +++ > drivers/media/video/s5p-mfc/s5p_mfc_debug.h | 47 + > drivers/media/video/s5p-mfc/s5p_mfc_intr.c | 92 ++ > drivers/media/video/s5p-mfc/s5p_mfc_intr.h | 26 + > drivers/media/video/s5p-mfc/s5p_mfc_memory.h | 43 + > drivers/media/video/s5p-mfc/s5p_mfc_opr.c | 885 +++++++++++ > drivers/media/video/s5p-mfc/s5p_mfc_opr.h | 160 ++ > 13 files changed, 4069 insertions(+), 0 deletions(-) > create mode 100644 drivers/media/video/s5p-mfc/Makefile > create mode 100644 drivers/media/video/s5p-mfc/regs-mfc5.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc.c > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_common.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_ctrls.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_debug.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_intr.c > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_intr.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_memory.h > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_opr.c > create mode 100644 drivers/media/video/s5p-mfc/s5p_mfc_opr.h > Snipped... > +/* Videobuf opts */ > +static struct vb2_ops s5p_mfc_qops = { > + .buf_queue = s5p_mfc_buf_queue, > + .queue_setup = s5p_mfc_queue_setup, > + .start_streaming = s5p_mfc_start_streaming, > + .buf_init = s5p_mfc_buf_init, > + .stop_streaming = s5p_mfc_stop_streaming, > + .wait_prepare = s5p_mfc_unlock, > + .wait_finish = s5p_mfc_lock, > +}; > + > +static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx) > +{ > + struct s5p_mfc_dev *dev = ctx->dev; > + struct s5p_mfc_buf *dst_buf; > + > + ctx->state = MFCINST_DEC_FINISHED; > + mfc_debug("Decided to finish\n"); > + ctx->sequence++; > + while (!list_empty(&ctx->dst_queue)) { > + dst_buf = list_entry(ctx->dst_queue.next, > + struct s5p_mfc_buf, list); > + mfc_debug("Cleaning up buffer: %d\n", > + dst_buf->b->v4l2_buf.index); > + vb2_set_plane_payload(dst_buf->b, 0, 0); > + vb2_set_plane_payload(dst_buf->b, 1, 0); > + list_del(&dst_buf->list); > + ctx->dst_queue_cnt--; > + dst_buf->b->v4l2_buf.sequence = (ctx->sequence++); > + if (s5p_mfc_get_pic_time_top(ctx) == > + s5p_mfc_get_pic_time_bottom(ctx)) > + dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE; > + else > + dst_buf->b->v4l2_buf.field = > + V4L2_FIELD_INTERLACED; > + ctx->dec_dst_flag &= ~(1 << dst_buf->b->v4l2_buf.index); > + vb2_buffer_done(dst_buf->b, VB2_BUF_STATE_DONE); > + mfc_debug("Cleaned up buffer: %d\n", > + dst_buf->b->v4l2_buf.index); > + } > + mfc_debug("After cleanup\n"); > +} > + > +static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned > int err) > +{ > + struct s5p_mfc_dev *dev = ctx->dev; > + struct s5p_mfc_buf *dst_buf; > + size_t dspl_y_addr = s5p_mfc_get_dspl_y_adr(); > + > + ctx->sequence++; > + /* If frame is same as previous then skip and do not dequeue */ > + if (s5p_mfc_get_frame_type() == S5P_FIMV_DECODE_FRAME_SKIPPED) > + return; > + /* The MFC returns address of the buffer, now we have to > + * check which videobuf does it correspond to */ > + list_for_each_entry(dst_buf, &ctx->dst_queue, list) { > + mfc_debug("Listing: %d\n", dst_buf->b->v4l2_buf.index); > + /* Check if this is the buffer we're looking for */ > + if (vb2_cma_plane_paddr(dst_buf->b, 0) == dspl_y_addr) { > + list_del(&dst_buf->list); > + ctx->dst_queue_cnt--; > + dst_buf->b->v4l2_buf.sequence = ctx->sequence; > + if (s5p_mfc_get_pic_time_top(ctx) == > + s5p_mfc_get_pic_time_bottom(ctx)) > + dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE; > + else > + dst_buf->b->v4l2_buf.field = > + V4L2_FIELD_INTERLACED; > + vb2_set_plane_payload(dst_buf->b, 0, ctx- >luma_size); > + vb2_set_plane_payload(dst_buf->b, 1, ctx- >chroma_size); > + clear_bit(dst_buf->b->v4l2_buf.index, > + &ctx->dec_dst_flag); > + if (err) { > + vb2_buffer_done(dst_buf->b, > + VB2_BUF_STATE_ERROR); > + } else { > + vb2_buffer_done(dst_buf->b, VB2_BUF_STATE_DONE); > + } > + break; > + } > + } > +} > + > +/* Handle frame decoding interrupt */ > +static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, > + unsigned int reason, unsigned int err) > +{ > + struct s5p_mfc_dev *dev = ctx->dev; > + unsigned int dst_frame_status; > + struct s5p_mfc_buf *src_buf; > + unsigned long flags; > + > + dst_frame_status = s5p_mfc_get_dspl_status() > + & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK; > + mfc_debug("Frame Status: %x\n", dst_frame_status); > + spin_lock_irqsave(&dev->irqlock, flags); > + /* All frames remaining in the buffer have been extracted */ > + if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) { > + s5p_mfc_handle_frame_all_extracted(ctx); > + } > + > + /* A frame has been decoded and is in the buffer */ > + if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY || > + dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) { > + s5p_mfc_handle_frame_new(ctx, err); > + } else { > + mfc_debug("No frame decode.\n"); > + } > + /* Mark source buffer as complete */ > + if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY > + && !list_empty(&ctx->src_queue)) { > + src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, > + list); > + mfc_debug("Packed PB test. Size:%d, prev offset: %ld, this > run:" > + " %d\n", src_buf->b->v4l2_planes[0].bytesused, > + ctx->consumed_stream, s5p_mfc_get_consumed_stream()); > + ctx->consumed_stream += s5p_mfc_get_consumed_stream(); > + if (s5p_mfc_get_frame_type() == > S5P_FIMV_DECODE_FRAME_P_FRAME > + && ctx->consumed_stream < > + src_buf->b- >v4l2_planes[0].bytesused) { > + /* Run MFC again on the same buffer */ > + mfc_debug("Running again the same buffer.\n"); > + s5p_mfc_set_dec_stream_buffer(ctx, > + src_buf->cookie.stream, ctx- >consumed_stream, > + src_buf->b->v4l2_planes[0].bytesused - > + ctx- >consumed_stream); > + dev->curr_ctx = ctx->num; > + s5p_mfc_clean_ctx_int_flags(ctx); > + spin_unlock_irqrestore(&dev->irqlock, flags); > + s5p_mfc_clear_int_flags(); > + wake_up_ctx(ctx, reason, err); > + s5p_mfc_decode_one_frame(ctx, 0); > + return; > + } else { > + mfc_debug("MFC needs next buffer.\n"); > + /* Advance to next buffer */ > + if (src_buf->b->v4l2_planes[0].bytesused == 0) { > + mfc_debug("Setting ctx->state to FINISHING\n"); > + ctx->state = MFCINST_DEC_FINISHING; > + } > + ctx->consumed_stream = 0; > + list_del(&src_buf->list); > + ctx->src_queue_cnt--; > + vb2_buffer_done(src_buf->b, VB2_BUF_STATE_DONE); > + } > + } > + spin_unlock_irqrestore(&dev->irqlock, flags); > + mfc_debug("Assesing whether this context should be run again.\n"); > + if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_DEC_FINISHING) > + || ctx->dst_queue_cnt < ctx->dpb_count) { > + mfc_debug("No need to run again.\n"); > + clear_work_bit(ctx); > + } > + mfc_debug("After assesing whether this context should be run > again.\n"); > + s5p_mfc_clear_int_flags(); > + wake_up_ctx(ctx, reason, err); > + if (test_and_clear_bit(0, &dev->hw_lock) == 0) > + BUG(); > + s5p_mfc_try_run(dev); > +} > + Basically, I understand that FINISHING state is starting point just after src queue/dequeue is finished. And state goes to the FINISHED right after all extracted. But, you change state as a FINISHED at beginning of s5p_mfc_handle_frame_all_extracted(). What about FINISHING state ? if (src_buf->b->v4l2_planes[0].bytesused == 0) this condition meets after FINISHED state set So, it is confusing if state change like (RUNNING -> FINISHING -> FINISHED) is right. Snipped... > 1.6.3.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
