[PATCH V2 6/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PV210

[Banajit Goswami]

This patch adds support for LCD backlight control using PWM timer
for Samsung's SMDKV210 board.

Signed-off-by: Banajit Goswami <banaji...@samsung.com>
---
Changes since v1:
- Used common GPIO macro
- Removed redundant timers

 arch/arm/mach-s5pv210/Kconfig         |    1 +
 arch/arm/mach-s5pv210/mach-smdkv210.c |   43 +++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 53aabef..d7fd031 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -130,6 +130,7 @@ config MACH_SMDKV210
        select SAMSUNG_DEV_ADC
        select SAMSUNG_DEV_IDE
        select SAMSUNG_DEV_KEYPAD
+       select SAMSUNG_DEV_PWM
        select SAMSUNG_DEV_TS
        select S5PV210_SETUP_FB_24BPP
        select S5PV210_SETUP_I2C1
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c 
b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bc9fdb5..8833e7b 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -18,6 +18,7 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -43,6 +44,7 @@
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV210_UCON_DEFAULT  (S3C2410_UCON_TXILEVEL |        \
@@ -208,6 +210,45 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata 
__initdata = {
        .setup_gpio     = s5pv210_fb_gpio_setup_24bpp,
 };
 
+static int smdkv210_backlight_init(struct device *dev)
+{
+       int ret;
+
+       ret = gpio_request(S5PV210_GPD0(3), "Backlight");
+       if (ret) {
+               printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n");
+               return ret;
+       }
+
+       /* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */
+       s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2));
+
+       return 0;
+}
+
+static void smdkv210_backlight_exit(struct device *dev)
+{
+       s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT);
+       gpio_free(S5PV210_GPD0(3));
+}
+
+static struct platform_pwm_backlight_data smdkv210_backlight_data = {
+       .pwm_id         = 3,
+       .max_brightness = 255,
+       .dft_brightness = 255,
+       .pwm_period_ns  = 78770,
+       .init           = smdkv210_backlight_init,
+       .exit           = smdkv210_backlight_exit,
+};
+
+static struct platform_device smdkv210_backlight_device = {
+       .name           = "pwm-backlight",
+       .dev            = {
+               .parent         = &s3c_device_timer[3].dev,
+               .platform_data  = &smdkv210_backlight_data,
+       },
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
        &s3c_device_adc,
        &s3c_device_cfcon,
@@ -229,6 +270,8 @@ static struct platform_device *smdkv210_devices[] 
__initdata = {
        &samsung_device_keypad,
        &smdkv210_dm9000,
        &smdkv210_lcd_lte480wv,
+       &s3c_device_timer[3],
+       &smdkv210_backlight_device,
 };
 
 static void __init smdkv210_dm9000_init(void)
-- 
1.6.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html