On 06/03/11 00:04, Tushar Behera wrote:
Added Kconfig entry for setup-usb-phy.c on which EHCI support is
dependent on.
Following the naming convention of other setup files, we have following
renaming.
usb-phy.c ==> setup-usb-phy.c
Signed-off-by: Tushar Behera<tushar.beh...@linaro.org>
---
arch/arm/mach-exynos4/Kconfig | 6 ++++++
arch/arm/mach-exynos4/Makefile | 2 +-
.../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0
3 files changed, 7 insertions(+), 1 deletions(-)
rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%)
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index b92c1e5..a45a022 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
help
Common setup code for the camera interfaces.
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# machine support
menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index a9bb94f..60fe5ec 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/usb-phy.c
b/arch/arm/mach-exynos4/setup-usb-phy.c
similarity index 100%
rename from arch/arm/mach-exynos4/usb-phy.c
rename to arch/arm/mach-exynos4/setup-usb-phy.c
I think, basically, the setup-usbphy.c would be in plat-s5p/ because
s5p_usb_phy_{init,exit} is called from plat-s5p/dev-echi.c and need to
separate exynos(mach-) and common s5p(plat-) stuff so that can be used
from other s5p usb to control usb phy.
Since it is not used for others so will apply this to fix build error.
However, we need to sort this out later.
Tushar, you don't need to re-submit this for removing white space :)
But as you know, please make sure that your patch has no problem with
checkpatch.pl before submitting.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
