Hi, Tushar.
Tushar Behera wrote:
> -----Original Message-----
> Subject: [PATCH] ARM: EXYNOS: Add USB OHCI support to ORIGEN board
>
> Signed-off-by: Tushar Behera <tushar.beh...@linaro.org>
> Signed-off-by: Angus Ainslie <angus.ains...@linaro.org>
Acked-by: Jingoo Han <jg1....@samsung.com>
Thanks.
Best regards,
Jingoo Han
> ---
>
> This patch are based Kukjin's for-next branch and OHCI related
> patches from Jingoo Han.
> [PATCH v2 0/3] Support Samsung Exynos OHCI device and driver
>
> arch/arm/mach-exynos/Kconfig | 1 +
> arch/arm/mach-exynos/mach-origen.c | 13 +++++++++++++
> 2 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index bd1bb9f1..0da2ced 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -304,6 +304,7 @@ config MACH_ORIGEN
> select SAMSUNG_DEV_PWM
> select EXYNOS4_DEV_DMA
> select EXYNOS4_DEV_PD
> + select EXYNOS4_DEV_USB_OHCI
> select EXYNOS4_SETUP_FIMD0
> select EXYNOS4_SETUP_SDHCI
> select EXYNOS4_SETUP_USB_PHY
> diff --git a/arch/arm/mach-exynos/mach-origen.c
> b/arch/arm/mach-exynos/mach-origen.c
> index f56d027..a0116036 100644
> --- a/arch/arm/mach-exynos/mach-origen.c
> +++ b/arch/arm/mach-exynos/mach-origen.c
> @@ -42,6 +42,7 @@
> #include <plat/fb.h>
> #include <plat/mfc.h>
>
> +#include <mach/ohci.h>
> #include <mach/map.h>
>
> /* Following are default values for UCON, ULCON and UFCON UART registers */
> @@ -487,6 +488,16 @@ static void __init origen_ehci_init(void)
> s5p_ehci_set_platdata(pdata);
> }
>
> +/* USB OHCI */
> +static struct exynos4_ohci_platdata origen_ohci_pdata;
> +
> +static void __init origen_ohci_init(void)
> +{
> + struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
> +
> + exynos4_ohci_set_platdata(pdata);
> +}
> +
> static struct gpio_keys_button origen_gpio_keys_table[] = {
> {
> .code = KEY_MENU,
> @@ -627,6 +638,7 @@ static struct platform_device *origen_devices[]
> __initdata = {
> &s5p_device_mfc_l,
> &s5p_device_mfc_r,
> &s5p_device_mixer,
> + &exynos4_device_ohci,
> &exynos4_device_pd[PD_LCD0],
> &exynos4_device_pd[PD_TV],
> &exynos4_device_pd[PD_G3D],
> @@ -702,6 +714,7 @@ static void __init origen_machine_init(void)
> s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
>
> origen_ehci_init();
> + origen_ohci_init();
> clk_xusbxti.rate = 24000000;
>
> s5p_tv_setup();
> --
> 1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
