On 23.04.2012 12:01, Wolfram Sang wrote: > Hi Karol, >> Tomasz had similar doubts when I've posted patch that checked these >> quirks only for S3C2440: >> >> http://permalink.gmane.org/gmane.linux.drivers.i2c/10305 >> >> Thus, I've chosen properties and not separate type. > > I understand this reasoning. I still differ, though. Think about my > above example about things getting worse. Then, you'd need another > quirk-property for $FLAW. Later, $FLAW is still there, but the timeout > issue was fixed. That would mean, the poor device-tree making person has > to know which quirks to select for this version of the controller. Just > specifying that it is the HDMI-phy and not a regular I2C controller is > much more convenient, and the driver will figure the rest.
> >> It's easy to introduce compat string (see below), but given above >> I'm afraid that we might end up adding -hdmiphy- variant for every >> new version of i2c controller. > > I'd be fine with that, given that the upcoming hdmiphy versions will not > need all the same set of quirk-flags. I think we want that "quirk lookup > table" fixed in the driver and not encoded in the device tree where > people could get it wrong. Also, the quirks are nothing a board maker > can select from; it is implicit as soons as you want the HDMIPHY on that > SoC, thus the compatible-entry should be enough of a description. Fair point, from integrator/board maker POV this makes much more sense. > I am not the ultimate expert about bindings, though, and am open for > corrections (I feel kinda confident on this issue, though ;)) I'm quite happy with doing it the way you just described. I'll resend whole patchset in a minute. Thanks! -- Karol Lewandowski | Samsung Poland R&D Center | Linux/Platform -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
