This patch adds platform data for using S3C-HSOTG driver at Universal_C210 target.
Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 12 ++++++++++++ 2 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5e64728..73207e3 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV + select S3C_DEV_USB_HSOTG select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_DMA select EXYNOS4_SETUP_FIMD0 @@ -259,6 +260,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FIMC select S5P_SETUP_MIPIPHY + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 3fd830a..15f18fb 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -205,6 +205,7 @@ static struct regulator_init_data lp3974_ldo2_data = { }; static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), @@ -290,6 +291,7 @@ static struct regulator_init_data lp3974_ldo7_data = { }; static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; @@ -486,7 +488,10 @@ static struct regulator_init_data lp3974_vichg_data = { static struct regulator_init_data lp3974_esafeout1_data = { .constraints = { .name = "SAFEOUT1", + .min_uV = 4800000, + .max_uV = 4800000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = 1, .state_mem = { .enabled = 1, }, @@ -992,6 +997,9 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; +/* USB OTG */ +static struct s3c_hsotg_plat universal_hsotg_pdata; + static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), @@ -1047,6 +1055,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, + &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -1099,10 +1108,13 @@ static void __init universal_machine_init(void) i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + s3c_hsotg_set_platdata(&universal_hsotg_pdata); universal_camera_init(); /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); + + clk_xusbxti.rate = 24000000; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
