Hi Laurent, On 07/26/2012 05:21 PM, Laurent Pinchart wrote: > On Friday 25 May 2012 21:52:48 Sylwester Nawrocki wrote: >> The driver initializes all board related properties except the s_power() >> callback to board code. The platforms that require this callback are not >> supported by this driver yet for CONFIG_OF=y. >> >> Signed-off-by: Sylwester Nawrocki<s.nawro...@samsung.com> >> Signed-off-by: Bartlomiej Zolnierkiewicz<b.zolnier...@samsung.com> >> Signed-off-by: Kyungmin Park<kyungmin.p...@samsung.com> >> --- >> .../bindings/camera/samsung-s5k6aafx.txt | 57 +++++++++ >> drivers/media/video/s5k6aa.c | 129 ++++++++++++----- >> 2 files changed, 146 insertions(+), 40 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt >> >> diff --git a/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt >> b/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt new file >> mode 100644 >> index 0000000..6685a9c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt >> @@ -0,0 +1,57 @@ >> +Samsung S5K6AAFX camera sensor >> +------------------------------ >> + >> +Required properties: >> + >> +- compatible : "samsung,s5k6aafx"; >> +- reg : base address of the device on I2C bus; >> +- video-itu-601-bus : parallel bus with HSYNC and VSYNC - ITU-R BT.601; >> +- vdd_core-supply : digital core voltage supply 1.5V (1.4V to 1.6V); >> +- vdda-supply : analog power voltage supply 2.8V (2.6V to 3.0V); >> +- vdd_reg-supply : regulator input power voltage supply 1.8V (1.7V to 1.9V) >> + or 2.8V (2.6V to 3.0); >> +- vddio-supply : I/O voltage supply 1.8V (1.65V to 1.95V) >> + or 2.8V (2.5V to 3.1V); >> + >> +Optional properties: >> + >> +- clock-frequency : the IP's main (system bus) clock frequency in Hz, the >> default > > Is that the input clock frequency ? Can't it vary ? Instead of accessing the
Yes, the description is incorrect in this patch, it should read: +- clock-frequency : the sensor's master clock frequency in Hz; and be a required property. As in this patch: https://github.com/snawrocki/linux/commit/e8a5f890dec0d7414b656bb1d1ac97d5e7abe563 It could vary (as this is a PLL input frequency), so probably a range would be a better alternative. Given that host device won't always be able to set this exact value... > sensor clock frequency from the FIMC driver you should reference a clock in > the sensor DT node. That obviously requires generic clock support, which might > not be available for your platform yet (that's one of the reasons the OMAP3 > ISP driver doesn't support DT yet). I agree it might be better, but waiting unknown number of kernel releases for the platforms to get converted to common clock API is not a good alternative either. I guess we could have some transitional solutions while other subsystems are getting adapted. Yet we need to specify the clock frequency range per sensor, so 1. either we specify it at a sensor node and host device driver references it, or 2. it could be added to a sensor specific child node of a host device mode, and then only the host would reference it, and sensor would reference a clock in its DT node; I guess it's not a problem that in most cases the camera host device is a clock provider. -- Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
