On 8 October 2012 17:59, Yuvaraj CD <yuvaraj...@gmail.com> wrote:
> As mmc_start_host is getting called before enabling the dw_mmc controller
> interrupt, there is a problem of missing the SDMMC_INT_CMD_DONE for the
> very first command sent by the sdio_reset.
> This problem occurs only when we disable MMC debugging i.e, MMC_DEBUG [=n].
> Hence this patch enables the dw_mmc controller interrupt before 
> mmc_start_host.
>
> Signed-off-by: Yuvaraj CD <yuvaraj...@samsung.com>
> ---
>  drivers/mmc/host/dw_mmc.c |   29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index a23af77..729c031 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2233,6 +2233,21 @@ int dw_mci_probe(struct dw_mci *host)
>         else
>                 host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
>
> +       /*
> +        * Enable interrupts for command done, data over, data empty, card 
> det,
> +        * receive ready and error such as transmit, receive timeout, crc 
> error
> +        */
> +       mci_writel(host, RINTSTS, 0xFFFFFFFF);
> +       mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
> +                  SDMMC_INT_TXDR | SDMMC_INT_RXDR |
> +                  DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
> +       mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci 
> interrupt */
> +
> +       dev_info(host->dev, "DW MMC controller at irq %d, "
> +                "%d bit host data width, "
> +                "%u deep fifo\n",
> +                host->irq, width, fifo_size);
> +
Makes sense
Reviewed By: Girish K S <girish.shivananja...@linaro.org>
>         /* We need at least one slot to succeed */
>         for (i = 0; i < host->num_slots; i++) {
>                 ret = dw_mci_init_slot(host, i);
> @@ -2262,20 +2277,6 @@ int dw_mci_probe(struct dw_mci *host)
>         else
>                 host->data_offset = DATA_240A_OFFSET;
>
> -       /*
> -        * Enable interrupts for command done, data over, data empty, card 
> det,
> -        * receive ready and error such as transmit, receive timeout, crc 
> error
> -        */
> -       mci_writel(host, RINTSTS, 0xFFFFFFFF);
> -       mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
> -                  SDMMC_INT_TXDR | SDMMC_INT_RXDR |
> -                  DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
> -       mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci 
> interrupt */
> -
> -       dev_info(host->dev, "DW MMC controller at irq %d, "
> -                "%d bit host data width, "
> -                "%u deep fifo\n",
> -                host->irq, width, fifo_size);
>         if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
>                 dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to