On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
> This modification adds 2 new thermal trend type THERMAL_TREND_RAISE_FULL
> and THERMAL_TREND_DROP_FULL. This thermal trend can be used to quickly
> jump to the upper or lower cooling level instead of incremental increase
> or decrease. This is needed for temperature sensors which support
> rising/falling
> threshold interrupts and polling can be totally avoided.
>
> Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.kach...@linaro.org>
> ---
> drivers/thermal/step_wise.c | 19 +++++++++++++++----
> include/linux/thermal.h | 2 ++
> 2 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
> index 1242cff..0d2d8d6 100644
> --- a/drivers/thermal/step_wise.c
> +++ b/drivers/thermal/step_wise.c
> @@ -35,6 +35,10 @@
> * state for this trip point
> * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
> * state for this trip point
> + * c. if the trend is THERMAL_TREND_RAISE_FULL, use highest cooling
> + * state for this trip point
> + * d. if the trend is THERMAL_TREND_DROP_FULL, use lowest cooling
> + * state for this trip point
> */
> static unsigned long get_target_state(struct thermal_instance *instance,
> enum thermal_trend trend)
> @@ -50,7 +54,10 @@ static unsigned long get_target_state(struct
> thermal_instance *instance,
> } else if (trend == THERMAL_TREND_DROPPING) {
> cur_state = cur_state > instance->lower ?
> (cur_state - 1) : instance->lower;
> - }
> + } else if (trend == THERMAL_TREND_RAISE_FULL)
> + cur_state = instance->upper;
> + else if (trend == THERMAL_TREND_DROP_FULL)
> + cur_state = instance->lower;
>
> return cur_state;
> }
> @@ -87,7 +94,8 @@ static void update_instance_for_throttle(struct
> thermal_zone_device *tz,
> }
>
> static void update_instance_for_dethrottle(struct thermal_zone_device *tz,
> - int trip, enum thermal_trip_type trip_type)
> + int trip, enum thermal_trip_type trip_type,
> + enum thermal_trend trend)
> {
> struct thermal_instance *instance;
> struct thermal_cooling_device *cdev;
> @@ -101,7 +109,10 @@ static void update_instance_for_dethrottle(struct
> thermal_zone_device *tz,
> cdev = instance->cdev;
> cdev->ops->get_cur_state(cdev, &cur_state);
>
> - instance->target = cur_state > instance->lower ?
> + if (trend == THERMAL_TREND_DROP_FULL)
> + instance->target = instance->lower;
> + else
> + instance->target = cur_state > instance->lower ?
> (cur_state - 1) : THERMAL_NO_TARGET;
>
what do you expect to happen if the trend is THERMAL_TREND_RAISE_FULL at
this time?
thanks,
rui
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
