Hi Alexander,
first of all could you elaborate a bit more on the error you experience,
because I currently have problems to understand it from the code alone :-) .
More inline.
Am Donnerstag, 22. November 2012, 14:00:01 schrieb Alexander Varnin:
> S3C2443 CPU has a problem with incorrect reading from EXTINTn
> registers. So s3c_irqext_type function wrongly modifies them.
> So add special function for s3c2443, to handle this case.
>
> Signed-off-by: Alexander Varnin <fenix...@mail.ru>
> ---
> arch/arm/mach-s3c24xx/s3c2443.c | 8 ++++
> arch/arm/plat-s3c24xx/irq.c | 89
> +++++++++++++++++++++++++++++++++++++++ 2 files changed, 97 insertions(+),
> 0 deletions(-)
>
> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c
> b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad..99eef31 100644
> --- a/arch/arm/mach-s3c24xx/s3c2443.c
> +++ b/arch/arm/mach-s3c24xx/s3c2443.c
> @@ -67,8 +67,11 @@ void s3c2443_restart(char mode, const char *cmd)
> __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
> }
>
> +extern int s3c2443_irqext_type(struct irq_data *data, unsigned int type);
> +
> int __init s3c2443_init(void)
> {
> + struct irq_chip * chip;
> printk("S3C2443: Initialising architecture\n");
>
> s3c_nand_setname("s3c2412-nand");
> @@ -81,6 +84,11 @@ int __init s3c2443_init(void)
> s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
> s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
>
> + chip = irq_get_chip(IRQ_EINT0);
> + chip->irq_set_type=s3c2443_irqext_type;
> + chip = irq_get_chip(IRQ_EINT4);
> + chip->irq_set_type=s3c2443_irqext_type;
> +
> return device_register(&s3c2443_dev);
> }
both this and your new exttype function would be more suitable for
irq-s3c2443.c .
> diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
> index fe57bbb..9c815f3 100644
> --- a/arch/arm/plat-s3c24xx/irq.c
> +++ b/arch/arm/plat-s3c24xx/irq.c
> @@ -224,7 +224,96 @@ s3c_irqext_type(struct irq_data *data, unsigned int
> type)
>
> return 0;
> }
> +#if defined(CONFIG_CPU_S3C2443)
> +int
> +s3c2443_irqext_type(struct irq_data *data, unsigned int type)
> +{
> + int i;
> + int fixed;
> + void __iomem *extint_reg;
> + void __iomem *gpcon_reg;
> + unsigned long gpcon_offset, extint_offset;
> + unsigned long newvalue = 0, value;
> +
> + if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
> + gpcon_reg = S3C2410_GPFCON;
> + extint_reg = S3C24XX_EXTINT0;
> + gpcon_offset = (data->irq - IRQ_EINT0) * 2;
> + extint_offset = (data->irq - IRQ_EINT0) * 4;
> + } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
> + gpcon_reg = S3C2410_GPFCON;
> + extint_reg = S3C24XX_EXTINT0;
> + gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
> + extint_offset = (data->irq - (EXTINT_OFF)) * 4;
> + } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
> + gpcon_reg = S3C2410_GPGCON;
> + extint_reg = S3C24XX_EXTINT1;
> + gpcon_offset = (data->irq - IRQ_EINT8) * 2;
> + extint_offset = (data->irq - IRQ_EINT8) * 4;
> + } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
> + gpcon_reg = S3C2410_GPGCON;
> + extint_reg = S3C24XX_EXTINT2;
> + gpcon_offset = (data->irq - IRQ_EINT8) * 2;
> + extint_offset = (data->irq - IRQ_EINT16) * 4;
> + } else {
> + return -1;
> + }
>
> + /* Set the GPIO to external interrupt mode */
> + value = __raw_readl(gpcon_reg);
> + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
> + __raw_writel(value, gpcon_reg);
> +
> + /* Set the external interrupt to pointed trigger type */
> + switch (type)
> + {
> + case IRQ_TYPE_NONE:
> + printk(KERN_WARNING "No edge setting!\n");
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + newvalue = S3C2410_EXTINT_RISEEDGE;
> + break;
> +
> + case IRQ_TYPE_EDGE_FALLING:
> + newvalue = S3C2410_EXTINT_FALLEDGE;
> + break;
> +
> + case IRQ_TYPE_EDGE_BOTH:
> + newvalue = S3C2410_EXTINT_BOTHEDGE;
> + break;
> +
> + case IRQ_TYPE_LEVEL_LOW:
> + newvalue = S3C2410_EXTINT_LOWLEV;
> + break;
> +
> + case IRQ_TYPE_LEVEL_HIGH:
> + newvalue = S3C2410_EXTINT_HILEV;
> + break;
> +
> + default:
> + printk(KERN_ERR "No such irq type %d", type);
> + return -1;
> + }
> +
> + value = __raw_readl(extint_reg);
> + //Hack for 2443 error workaround
> + fixed = 0;
> + if(extint_reg == S3C24XX_EXTINT1 || extint_reg == S3C24XX_EXTINT2)
> + for(i=0; i<7;i++)
> + fixed |= (((value >> ((7-i)*4+1)) & 7) | ((value >>
> ((7-i)*4-3)) & 8)) << i*4;
> + else
> + for(i=0; i<7;i++)
> + fixed |= ( (value >> (7-i)*4) & 0xf ) << i*4;
> + fixed |= (((value>>1) & 7) | ((value<<3) & 8)) << 27;
> + value = fixed;
What does this do or what should it do? Also it gets calculated but
never used?
And please use scripts/checkpatch.pl to verify your patch follows
coding guidelines, as this block is especially hard to read.
> + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
> + __raw_writel(value, extint_reg);
> +
> + return 0;
> +}
> +#endif //defined(CONFIG_CPU_S3C2443)
> static struct irq_chip s3c_irqext_chip = {
> .name = "s3c-ext",
> .irq_mask = s3c_irqext_mask,
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
