Heiko Stübner wrote:
> 
> Am Mittwoch, 9. Januar 2013, 23:43:35 schrieb Romain Naour:
> > This series of patches converts the s3c and s5pc100 timer driver to the
> > clocksource/clockevent API. I made some test on a mini2440 board and I
> had
> > to reduce timers frequency to 1MHz in order to produce a timer's
overflow
> > every 64ms. Initial timer's frequency (8,45MHz) provide only 7ms between
> > each overflow. It is not enough. As timers were previously used to
produce
> > an IRQ at 200Hz, some board (Osiris, Anubis board) use an external 12MHz
> > signal to clock the timers (tclk1). So, I changed their configuration to
> > select internal pclk clock instead, but I can't test it.
> >
> > Since clockevent/clocksource API becomes available, we can use High
> > Resolution Timer and Tickless mode.
> >
> > Most of the work is already done in s5p-time.c (renamed samsung-time.c).
> > I added some #define for s3c24xx and s5pc100 case.
> 
> not sure, if the ack I added to the previous patches will carry thru, so:
> 
> The whole series
> 
> Acked-by: Heiko Stuebner <he...@sntech.de>
> 
> and tested on a s3c2416 based machine, so
> 
> Tested-by: Heiko Stuebner <he...@sntech.de>
> 
Thanks for your review and test on s3c2416 board :-)

- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to