Hi Felipe,
On Fri, Jan 11, 2013 at 6:28 PM, Felipe Balbi <ba...@ti.com> wrote: > Hi, > > On Fri, Jan 11, 2013 at 06:10:48PM +0530, Vivek Gautam wrote: >> Hi Doug, >> >> Sorry!! for the delayed response. >> >> >> On Thu, Dec 20, 2012 at 4:31 AM, Doug Anderson <diand...@chromium.org> wrote: >> > Vivek, >> > >> > I don't really have a good 10000 foot view about how all of the USB >> > bits fit together, but a few detail-oriented comments below. >> > >> > >> > On Tue, Dec 18, 2012 at 6:43 AM, Vivek Gautam <gautam.vi...@samsung.com> >> > wrote: >> >> This patch adds host phy support to samsung-usbphy.c and >> >> further adds support for samsung's exynos5250 usb-phy. >> >> >> >> Signed-off-by: Praveen Paneri <p.pan...@samsung.com> >> >> Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com> >> >> --- >> >> .../devicetree/bindings/usb/samsung-usbphy.txt | 25 +- >> >> drivers/usb/phy/Kconfig | 2 +- >> >> drivers/usb/phy/samsung-usbphy.c | 465 >> >> ++++++++++++++++++-- >> >> include/linux/usb/samsung_usb_phy.h | 13 + >> >> 4 files changed, 454 insertions(+), 51 deletions(-) >> >> >> >> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt >> >> b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt >> >> index a7b28b2..2ec5400 100644 >> >> --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt >> >> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt >> >> @@ -1,23 +1,38 @@ >> >> * Samsung's usb phy transceiver >> >> >> >> -The Samsung's phy transceiver is used for controlling usb otg phy for >> >> -s3c-hsotg usb device controller. >> >> +The Samsung's phy transceiver is used for controlling usb phy for >> >> +s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers >> >> +across Samsung SOCs. >> >> TODO: Adding the PHY binding with controller(s) according to the under >> >> developement generic PHY driver. >> >> >> >> Required properties: >> >> + >> >> +Exynos4210: >> >> - compatible : should be "samsung,exynos4210-usbphy" >> >> - reg : base physical address of the phy registers and length of memory >> >> mapped >> >> region. >> >> >> >> +Exynos5250: >> >> +- compatible : should be "samsung,exynos5250-usbphy" >> >> +- reg : base physical address of the phy registers and length of memory >> >> mapped >> >> + region. >> >> + >> >> Optional properties: >> >> - samsung,usb-phyhandle : should point to usb-phyhandle sub-node which >> >> provides >> >> binding data to enable/disable device PHY handled >> >> by >> >> - PMU register. >> >> + PMU register; or to configure usb2.0 phy handled >> >> by >> >> + SYSREG. >> >> >> >> Required properties: >> >> - compatible : should be "samsung,usbdev-phyctrl" >> >> for >> >> - DEVICE type phy. >> >> + DEVICE type phy; or >> >> + should be >> >> "samsung,usbhost-phyctrl" for >> >> + HOST type phy; or >> >> + should be "samsung,usb-phycfg" for >> >> + USB2.0 PHY_CFG. >> >> - samsung,phyhandle-reg: base physical address of >> >> - PHY_CONTROL register in >> >> PMU. >> >> + PHY_CONTROL register in >> >> PMU; >> >> + or USB2.0 PHY_CFG >> >> register >> >> + in SYSREG. >> >> - samsung,enable-mask : should be '1' >> >> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig >> >> index 17ad743..13c0eaf 100644 >> >> --- a/drivers/usb/phy/Kconfig >> >> +++ b/drivers/usb/phy/Kconfig >> >> @@ -47,7 +47,7 @@ config USB_RCAR_PHY >> >> >> >> config SAMSUNG_USBPHY >> >> bool "Samsung USB PHY controller Driver" >> >> - depends on USB_S3C_HSOTG >> >> + depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS >> >> select USB_OTG_UTILS >> >> help >> >> Enable this to support Samsung USB phy controller for samsung >> >> diff --git a/drivers/usb/phy/samsung-usbphy.c >> >> b/drivers/usb/phy/samsung-usbphy.c >> >> index 4ceabe3..621348a 100644 >> >> --- a/drivers/usb/phy/samsung-usbphy.c >> >> +++ b/drivers/usb/phy/samsung-usbphy.c >> >> @@ -5,7 +5,8 @@ >> >> * >> >> * Author: Praveen Paneri <p.pan...@samsung.com> >> >> * >> >> - * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG >> >> controller >> >> + * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P >> >> and >> >> + * OHCI-EXYNOS controllers. >> >> * >> >> * This program is free software; you can redistribute it and/or modify >> >> * it under the terms of the GNU General Public License version 2 as >> >> @@ -24,7 +25,7 @@ >> >> #include <linux/err.h> >> >> #include <linux/io.h> >> >> #include <linux/of.h> >> >> -#include <linux/usb/otg.h> >> >> +#include <linux/usb/samsung_usb_phy.h> >> >> #include <linux/platform_data/samsung-usbphy.h> >> >> >> >> /* Register definitions */ >> >> @@ -56,6 +57,103 @@ >> >> #define RSTCON_HLINK_SWRST (0x1 << 1) >> >> #define RSTCON_SWRST (0x1 << 0) >> >> >> >> +/* EXYNOS5 */ >> >> +#define EXYNOS5_PHY_HOST_CTRL0 (0x00) >> >> + >> >> +#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) >> >> + >> >> +#define HOST_CTRL0_REFCLKSEL_MASK (0x3) >> >> +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) >> >> +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) >> >> +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) >> >> + >> >> +#define HOST_CTRL0_FSEL_MASK (0x7 << 16) >> >> +#define HOST_CTRL0_FSEL(_x) ((_x) << 16) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_50M (0x7) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_24M (0x5) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_20M (0x4) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_12M (0x2) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_10M (0x1) >> >> +#define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0) >> > >> > Add the shifts to the #defines and remove HOST_CTRL0_FSEL(_x). That >> > makes it match the older phy more closely. >> > >> Wouldn't it hamper the readability when shifts are used ?? >> I mean if we have something like this - >> >> phyhost |= HOST_CTRL0_FSEL(phyclk) > > this one looks better to my eyes. > Ok, better we keep this. >> >> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_9600K; >> > >> > Why |= with 0? >> > >> kept this just to keep things look similar :-). will remove this line, > > I would rather keep it. Compiler will optimize it out anyway and it > makes things logical, I mean, we can see that you're telling IP that > reference clock is 9600KHz. > ditto ! -- Thanks & Regards Vivek -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
