On Wed, Feb 13, 2013 at 19:01, Vikas Sajjan wrote:
Made necessary changes in s6e8ax0 panel driver as per the CDF-T.
It also removes the dependency on backlight and lcd framework
Signed-off-by: Vikas Sajjan<vikas.saj...@linaro.org>
---
drivers/video/exynos/s6e8ax0.c | 848 +++++++++++++++++++++-------------------
1 file changed, 444 insertions(+), 404 deletions(-)
diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/exynos/s6e8ax0.c
index 7f7b25f..5a17e3c 100644
--- a/drivers/video/exynos/s6e8ax0.c
+++ b/drivers/video/exynos/s6e8ax0.c
@@ -25,6 +25,7 @@
#include <linux/backlight.h>
#include <linux/regulator/consumer.h>
+#include <video/display.h>
#include <video/mipi_display.h>
#include <video/exynos_mipi_dsim.h>
@@ -38,8 +39,7 @@
#define POWER_IS_OFF(pwr) ((pwr) == FB_BLANK_POWERDOWN)
#define POWER_IS_NRM(pwr) ((pwr) == FB_BLANK_NORMAL)
-#define lcd_to_master(a) (a->dsim_dev->master)
-#define lcd_to_master_ops(a) ((lcd_to_master(a))->master_ops)
+#define to_panel(p) container_of(p, struct s6e8ax0, entity)
enum {
DSIM_NONE_STATE = 0,
@@ -47,20 +47,34 @@ enum {
DSIM_FRAME_DONE = 2,
};
+/* This structure defines all the properties of a backlight */
+struct backlight_prop {
+ /* Current User requested brightness (0 - max_brightness) */
+ int brightness;
+ /* Maximal value for brightness (read-only) */
+ int max_brightness;
+};
+
+struct panel_platform_data {
+ unsigned int reset_delay;
+ unsigned int power_on_delay;
+ unsigned int power_off_delay;
+ const char *video_source_name;
+};
+
struct s6e8ax0 {
- struct device *dev;
- unsigned int power;
- unsigned int id;
- unsigned int gamma;
- unsigned int acl_enable;
- unsigned int cur_acl;
-
- struct lcd_device *ld;
- struct backlight_device *bd;
-
- struct mipi_dsim_lcd_device *dsim_dev;
- struct lcd_platform_data *ddi_pd;
+ struct platform_device *pdev;
+ struct video_source *src;
+ struct display_entity entity;
+ unsigned int power;
+ unsigned int id;
+ unsigned int gamma;
+ unsigned int acl_enable;
+ unsigned int cur_acl;
+ bool panel_reverse;
+ struct lcd_platform_data *plat_data;
struct mutex lock;
+ struct backlight_prop bl_prop;
bool enabled;
};
Could this panel driver use only CDF?
Does not consider the compatibility with backlight and lcd framework?
-static const unsigned char s6e8ax0_22_gamma_30[] = {
+static unsigned char s6e8ax0_22_gamma_30[] = {
0xfa, 0x01, 0x60, 0x10, 0x60, 0xf5, 0x00, 0xff, 0xad, 0xaf,
0xbA, 0xc3, 0xd8, 0xc5, 0x9f, 0xc6, 0x9e, 0xc1, 0xdc, 0xc0,
0x00, 0x61, 0x00, 0x5a, 0x00, 0x74,
};
In all case, you had changed data type to 'static unsigned char'.
Is it need to change all case? Otherwise, for the unity of the code?
Thank you,
Donghwa Lee
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
