This patch enables four cores on exynos5440. Also this patch skips the non
exynos5440 pmu control changes.

Cc: Kukjin Kim <kgene....@samsung.com>
Signed-off-by: Kukjin Kim <kgene....@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
---
 arch/arm/mach-exynos/platsmp.c |   44 ++++++++++++++++++++++-----------------
 1 files changed, 25 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 60f7c5b..087b73f 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -40,6 +40,8 @@ static inline void __iomem *cpu_boot_reg_base(void)
 {
        if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
                return S5P_INFORM5;
+       else if (soc_is_exynos5440())
+               return S5P_VA_CHIPID + 0x560;
        return S5P_VA_SYSRAM;
 }
 
@@ -116,27 +118,29 @@ static int __cpuinit exynos_boot_secondary(unsigned int 
cpu, struct task_struct
         */
        write_pen_release(phys_cpu);
 
-       if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
-               __raw_writel(S5P_CORE_LOCAL_PWR_EN,
-                            S5P_ARM_CORE1_CONFIGURATION);
-
-               timeout = 10;
-
-               /* wait max 10 ms until cpu1 is on */
-               while ((__raw_readl(S5P_ARM_CORE1_STATUS)
-                       & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
-                       if (timeout-- == 0)
-                               break;
-
-                       mdelay(1);
-               }
-
-               if (timeout == 0) {
-                       printk(KERN_ERR "cpu1 power enable failed");
-                       spin_unlock(&boot_lock);
-                       return -ETIMEDOUT;
+       timeout = 10;
+       if (!soc_is_exynos5440()) {
+               if (!(__raw_readl(S5P_ARM_CORE1_STATUS) &
+                                       S5P_CORE_LOCAL_PWR_EN)) {
+
+                       __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+                                    S5P_ARM_CORE1_CONFIGURATION);
+
+                       /* wait max 10 ms until this cpu is on */
+                       while (!(__raw_readl(S5P_ARM_CORE1_STATUS) &
+                                       S5P_CORE_LOCAL_PWR_EN)) {
+                               if (timeout-- == 0)
+                                       break;
+                               mdelay(1);
+                       }
                }
        }
+       if (timeout == 0) {
+               pr_err("cpu%d power enable failed", cpu);
+               spin_unlock(&boot_lock);
+               return -ETIMEDOUT;
+       }
+
        /*
         * Send the secondary CPU a soft interrupt, thereby causing
         * the boot monitor to read the system wide flags register,
@@ -178,6 +182,8 @@ static void __init exynos_smp_init_cpus(void)
 
        if (soc_is_exynos5250())
                ncores = 2;
+       else if (soc_is_exynos5440())
+               ncores = 4;
        else
                ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to