Hi Eduardo,
On Thu, May 9, 2013 at 7:09 PM, Eduardo Valentin
<eduardo.valen...@ti.com> wrote:
> Hey Amit,
>
> On 07-05-2013 09:00, Amit Daniel Kachhap wrote:
>> This code splits the exynos tmu driver code into SOC specific data parts.
>> This will simplify adding new SOC specific data to the same TMU controller.
>
> I like the idea of spliting the code from data. The driver goes into a
> self contained direction. Thanks for doing this.Couple of minor comments
> follows.
>
>>
>> Acked-by: Kukjin Kim <kgene....@samsung.com>
>> Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
>> ---
>> drivers/thermal/samsung/Kconfig | 13 ++++-
>> drivers/thermal/samsung/Makefile | 1 +
>> drivers/thermal/samsung/exynos_thermal_common.h | 3 +-
>> drivers/thermal/samsung/exynos_tmu.c | 67 +------------------
>> drivers/thermal/samsung/exynos_tmu_data.c | 78
>> +++++++++++++++++++++++
>> drivers/thermal/samsung/exynos_tmu_data.h | 41 ++++++++++++
>> 6 files changed, 137 insertions(+), 66 deletions(-)
>> create mode 100644 drivers/thermal/samsung/exynos_tmu_data.c
>> create mode 100644 drivers/thermal/samsung/exynos_tmu_data.h
>>
>> diff --git a/drivers/thermal/samsung/Kconfig
>> b/drivers/thermal/samsung/Kconfig
>> index 7857e20..f23f533 100644
>> --- a/drivers/thermal/samsung/Kconfig
>> +++ b/drivers/thermal/samsung/Kconfig
>> @@ -5,7 +5,8 @@ config EXYNOS_THERMAL
>> If you say yes here you get support for the exynos thermal driver
>> for exynos4 and exynos5 soc. This driver initialises the TMU, reports
>> temperature and handles cooling action if defined. This driver uses
>> - core thermal API's.
>> + core thermal API's and TMU configuration data from the supported
>> + soc's.
>>
>> config EXYNOS_THERMAL_CORE
>> bool "Core thermal framework support for EXYNOS SOC's"
>> @@ -15,3 +16,13 @@ config EXYNOS_THERMAL_CORE
>> (Thermal Management Unit) common registration/unregistration
>> functions to the core thermal layer and also to use the generic
>> cpu cooling API's.
>> +
>> +config EXYNOS_THERMAL_DATA
>> + bool "Temperature sensor congiguration data for EXYNOS series SOC"
>> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 ||
>> SOC_EXYNOS5250)
>> + depends on EXYNOS_THERMAL
>> + help
>> + If you say yes here you can enable TMU (Thermal Management Unit) on
>> + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
>> + enables/prepares the configuration, trip and cooling data for the TMU
>> + driver.
>
> What is your strategy here? Looks like you want to provide all required
> data (for all supported SoCs) based on 1 config entry
> (EXYNOS_THERMAL_DATA). What do you think of having one per SoC supported?
Yesterday you gave a comment that introduce something like
ARCH_HAS_TMU so now each SOC if needed will enable this from the
platform Kconfig. In this scenario I will remove EXYNOS_THERMAL_DATA
as it is not required. Also having new Kconfig or each data file for
each SOC seems too much to me :) although they are logically correct.
In many cases different soc's share the same data(here 5250, 4412,
4212). For this re-structuring I feel a single file for data looks
fine.
Thanks,
Amit Daniel
>
>> diff --git a/drivers/thermal/samsung/Makefile
>> b/drivers/thermal/samsung/Makefile
>> index 22528d6..c0446e8 100644
>> --- a/drivers/thermal/samsung/Makefile
>> +++ b/drivers/thermal/samsung/Makefile
>> @@ -4,3 +4,4 @@
>> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> exynos_thermal-y := exynos_tmu.o
>> exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
>> +exynos_thermal-$(CONFIG_EXYNOS_THERMAL_DATA) += exynos_tmu_data.o
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h
>> b/drivers/thermal/samsung/exynos_thermal_common.h
>> index 1c3f8b7..3b85858 100644
>> --- a/drivers/thermal/samsung/exynos_thermal_common.h
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>> @@ -62,7 +62,7 @@ struct freq_clip_table {
>> struct thermal_trip_point_conf {
>> int trip_val[MAX_TRIP_COUNT];
>> int trip_count;
>> - u8 trigger_falling;
>> + unsigned char trigger_falling;
>> };
>
> Why do you need this change to bifurcate data / code? (Sounds like you
> probably want to send this in a separate patch, as it seams to be a
> separated issue).
>
>>
>> struct thermal_cooling_conf {
>> @@ -93,6 +93,5 @@ exynos_register_thermal(struct thermal_sensor_conf
>> *sensor_conf) { return 0; }
>>
>> static inline void
>> exynos_report_trigger(void) { return; }
>> -
>
> I dont think this is realted to this patch.
>
>> #endif /* CONFIG_EXYNOS_COMMON */
>> #endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c
>> b/drivers/thermal/samsung/exynos_tmu.c
>> index a02f2c9..05b5068 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -34,6 +34,7 @@
>> #include <linux/workqueue.h>
>> #include "exynos_thermal_common.h"
>> #include "exynos_tmu.h"
>> +#include "exynos_tmu_data.h"
>>
>> /* Exynos generic registers */
>> #define EXYNOS_TMU_REG_TRIMINFO 0x0
>> @@ -385,66 +386,6 @@ static struct thermal_sensor_conf exynos_sensor_conf = {
>> .write_emul_temp = exynos_tmu_set_emulation,
>> };
>>
>> -#if defined(CONFIG_CPU_EXYNOS4210)
>> -static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>> - .threshold = 80,
>> - .trigger_levels[0] = 5,
>> - .trigger_levels[1] = 20,
>> - .trigger_levels[2] = 30,
>> - .trigger_level0_en = 1,
>> - .trigger_level1_en = 1,
>> - .trigger_level2_en = 1,
>> - .trigger_level3_en = 0,
>> - .gain = 15,
>> - .reference_voltage = 7,
>> - .cal_type = TYPE_ONE_POINT_TRIMMING,
>> - .freq_tab[0] = {
>> - .freq_clip_max = 800 * 1000,
>> - .temp_level = 85,
>> - },
>> - .freq_tab[1] = {
>> - .freq_clip_max = 200 * 1000,
>> - .temp_level = 100,
>> - },
>> - .freq_tab_count = 2,
>> - .type = SOC_ARCH_EXYNOS4210,
>> -};
>> -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>> -#else
>> -#define EXYNOS4210_TMU_DRV_DATA (NULL)
>> -#endif
>> -
>> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
>> -static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
>> - .threshold_falling = 10,
>> - .trigger_levels[0] = 85,
>> - .trigger_levels[1] = 103,
>> - .trigger_levels[2] = 110,
>> - .trigger_level0_en = 1,
>> - .trigger_level1_en = 1,
>> - .trigger_level2_en = 1,
>> - .trigger_level3_en = 0,
>> - .gain = 8,
>> - .reference_voltage = 16,
>> - .noise_cancel_mode = 4,
>> - .cal_type = TYPE_ONE_POINT_TRIMMING,
>> - .efuse_value = 55,
>> - .freq_tab[0] = {
>> - .freq_clip_max = 800 * 1000,
>> - .temp_level = 85,
>> - },
>> - .freq_tab[1] = {
>> - .freq_clip_max = 200 * 1000,
>> - .temp_level = 103,
>> - },
>> - .freq_tab_count = 2,
>> - .type = SOC_ARCH_EXYNOS,
>> -};
>> -#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data)
>> -#else
>> -#define EXYNOS_TMU_DRV_DATA (NULL)
>> -#endif
>> -
>> #ifdef CONFIG_OF
>> static const struct of_device_id exynos_tmu_match[] = {
>> {
>> @@ -453,11 +394,11 @@ static const struct of_device_id exynos_tmu_match[] = {
>> },
>> {
>> .compatible = "samsung,exynos4412-tmu",
>> - .data = (void *)EXYNOS_TMU_DRV_DATA,
>> + .data = (void *)EXYNOS5250_TMU_DRV_DATA,
>> },
>> {
>> .compatible = "samsung,exynos5250-tmu",
>> - .data = (void *)EXYNOS_TMU_DRV_DATA,
>> + .data = (void *)EXYNOS5250_TMU_DRV_DATA,
>> },
>> {},
>> };
>> @@ -471,7 +412,7 @@ static struct platform_device_id exynos_tmu_driver_ids[]
>> = {
>> },
>> {
>> .name = "exynos5250-tmu",
>> - .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA,
>> + .driver_data = (kernel_ulong_t)EXYNOS5250_TMU_DRV_DATA,
>> },
>> { },
>> };
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c
>> b/drivers/thermal/samsung/exynos_tmu_data.c
>> new file mode 100644
>> index 0000000..13a60ca
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -0,0 +1,78 @@
>> +/*
>> + * exynos_tmu_data.c - Samsung EXYNOS tmu data file
>> + *
>> + * Copyright (C) 2013 Samsung Electronics
>> + * Amit Daniel Kachhap <amit.dan...@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + */
>> +
>> +#include "exynos_thermal_common.h"
>> +#include "exynos_tmu.h"
>> +
>> +#if defined(CONFIG_CPU_EXYNOS4210)
>> +struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>> + .threshold = 80,
>> + .trigger_levels[0] = 5,
>> + .trigger_levels[1] = 20,
>> + .trigger_levels[2] = 30,
>> + .trigger_level0_en = 1,
>> + .trigger_level1_en = 1,
>> + .trigger_level2_en = 1,
>> + .trigger_level3_en = 0,
>> + .gain = 15,
>> + .reference_voltage = 7,
>> + .cal_type = TYPE_ONE_POINT_TRIMMING,
>> + .freq_tab[0] = {
>> + .freq_clip_max = 800 * 1000,
>> + .temp_level = 85,
>> + },
>> + .freq_tab[1] = {
>> + .freq_clip_max = 200 * 1000,
>> + .temp_level = 100,
>> + },
>> + .freq_tab_count = 2,
>> + .type = SOC_ARCH_EXYNOS4210,
>> +};
>> +#endif
>> +
>> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
>> +struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
>> + .threshold_falling = 10,
>> + .trigger_levels[0] = 85,
>> + .trigger_levels[1] = 103,
>> + .trigger_levels[2] = 110,
>> + .trigger_level0_en = 1,
>> + .trigger_level1_en = 1,
>> + .trigger_level2_en = 1,
>> + .trigger_level3_en = 0,
>> + .gain = 8,
>> + .reference_voltage = 16,
>> + .noise_cancel_mode = 4,
>> + .cal_type = TYPE_ONE_POINT_TRIMMING,
>> + .efuse_value = 55,
>> + .freq_tab[0] = {
>> + .freq_clip_max = 800 * 1000,
>> + .temp_level = 85,
>> + },
>> + .freq_tab[1] = {
>> + .freq_clip_max = 200 * 1000,
>> + .temp_level = 103,
>> + },
>> + .freq_tab_count = 2,
>> + .type = SOC_ARCH_EXYNOS,
>> +};
>> +#endif
>
> If you define config entries per SoC data, you could have a file per SoC
> data and remove the #ifdefery by solving the config in the Makefile.
> What do you think?
>
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h
>> b/drivers/thermal/samsung/exynos_tmu_data.h
>> new file mode 100644
>> index 0000000..5b69711
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -0,0 +1,41 @@
>> +/*
>> + * exynos_tmu_data.h - Samsung EXYNOS tmu data header file
>> + *
>> + * Copyright (C) 2013 Samsung Electronics
>> + * Amit Daniel Kachhap <amit.dan...@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + */
>> +
>> +#ifndef _LINUX_EXYNOS_TMU_DATA_H
>> +#define _LINUX_EXYNOS_TMU_DATA_H
>> +
> how about _EXYNOS_TMU_DATA_H ?
>
>
>
>> +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA)
>> +extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
>> +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>> +#else
>> +#define EXYNOS4210_TMU_DRV_DATA (NULL)
>> +#endif
>> +
>> +#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)) && \
>> +defined(CONFIG_EXYNOS_THERMAL_DATA)
>> +extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data;
>> +#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
>> +#else
>> +#define EXYNOS5250_TMU_DRV_DATA (NULL)
>> +#endif
>> +
>> +#endif /*_LINUX_EXYNOS_TMU_DATA_H*/
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
