* Kishon Vijay Abraham I <kis...@ti.com> [130717 23:53]:
> In order for controllers to get PHY in case of non dt boot, the phy
> binding information (phy device name) should be added in the platform
> data of the controller.
>
> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
> Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> Acked-by: Felipe Balbi <ba...@ti.com>
> ---
> arch/arm/mach-omap2/usb-musb.c | 3 +++
> include/linux/usb/musb.h | 3 +++
> 2 files changed, 6 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
> index 8c4de27..6aa7cbf 100644
> --- a/arch/arm/mach-omap2/usb-musb.c
> +++ b/arch/arm/mach-omap2/usb-musb.c
> @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data
> *musb_board_data)
> musb_plat.mode = board_data->mode;
> musb_plat.extvbus = board_data->extvbus;
>
> + if (cpu_is_omap34xx())
> + musb_plat.phy_label = "twl4030";
> +
> if (soc_is_am35xx()) {
> oh_name = "am35x_otg_hs";
> name = "musb-am35x";
I don't think there's a USB PHY on non-twl4030 chips, so this should
be OK:
Acked-by: Tony Lindgren <t...@atomide.com>
> diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
> index 053c268..596f8c8 100644
> --- a/include/linux/usb/musb.h
> +++ b/include/linux/usb/musb.h
> @@ -104,6 +104,9 @@ struct musb_hdrc_platform_data {
> /* for clk_get() */
> const char *clock;
>
> + /* phy label */
> + const char *phy_label;
> +
> /* (HOST or OTG) switch VBUS on/off */
> int (*set_vbus)(struct device *dev, int is_on);
>
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
