The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).

Signed-off-by: Arun Kumar K <arun...@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
---
 .../devicetree/bindings/media/exynos5-fimc-is.txt  |   47 ++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt

diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt 
b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
new file mode 100644
index 0000000..bc279b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
@@ -0,0 +1,47 @@
+Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS)
+------------------------------------------------------
+
+The camera subsystem on Samsung Exynos5 SoC has some changes relative
+to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and
+FIMC-LITE IPs but has a much improved version of FIMC-IS which can
+handle sensor controls and camera post-processing operations. The
+Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many
+post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two
+dedicated scalers (SCC and SCP).
+
+fimc-is node
+------------
+
+Required properties:
+
+- compatible        : must be "samsung,exynos5250-fimc-is"
+- reg               : physical base address and size of the memory mapped
+                      registers
+- interrupt-parent  : parent interrupt controller
+- interrupts        : fimc-is interrupt to the parent interrupt controller
+- clocks            : list of clock specifiers, corresponding to entries in
+                      clock-names property;
+- clock-names       : must contain "isp", "mcu_isp", "isp_div0", "isp_div1",
+                      "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries,
+                      matching entries in the clocks property.
+- samsung,pmu       : phandle to the fimc-is pmu node describing the register
+                      base and size for FIMC-IS PMU.
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible   : should be "samsung,exynos4212-i2c-isp" for Exynos4212,
+                 Exynos4412 and Exynos5250 SoCs;
+- reg          : physical base address and length of the registers set;
+- clocks       : must contain gate clock specifier for this controller;
+- clock-names  : must contain "i2c_isp" entry.
+
+For the i2c-isp node, it is required to specify a pinctrl state named 
"default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller 
node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to