On Thu, Sep 05, 2013 at 12:35:23AM +0200, Heiko Stübner wrote:
> This adds a new driver to support the s3c24xx dma using the dmaengine
> and makes the old one in mach-s3c24xx obsolete in the long run.
>
> Conceptually the s3c24xx-dma feels like a distant relative of the pl08x
> with numerous virtual channels being mapped to a lot less physical ones.
> The driver therefore borrows a lot from the amba-pl08x driver in this
> regard. Functionality-wise the driver gains a memcpy ability in addition
> to the slave_sg one.
>
> The driver supports both the method for requesting the peripheral used
> by SoCs before the S3C2443 and the different method for S3C2443 and later.
>
> On earlier SoCs the hardware channels usable for specific peripherals is
> constrainted while on later SoCs all channels can be used for any peripheral.
>
> Tested on a s3c2416-based board, memcpy using the dmatest module and
> slave_sg partially using the spi-s3c64xx driver.
>
> Signed-off-by: Heiko Stuebner <he...@sntech.de>
> Acked-by: Linus Walleij <linus.wall...@linaro.org>
> ---
> +static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie, struct dma_tx_state *txstate)
> +{
> + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
> + struct virt_dma_desc *vd;
> + unsigned long flags;
> + enum dma_status ret;
> + size_t bytes = 0;
> +
> + ret = dma_cookie_status(chan, cookie, txstate);
> + if (ret == DMA_SUCCESS)
> + return ret;
> +
> + /*
> + * There's no point calculating the residue if there's
> + * no txstate to store the value.
> + */
> + if (!txstate)
> + return ret;
> +
> + spin_lock_irqsave(&s3cchan->vc.lock, flags);
> + ret = dma_async_is_complete(cookie, txstate->last, txstate->used);
Did you see what dma_cookie_status() does. There is no need to call
dma_async_is_complete() here!
> + if (ret != DMA_SUCCESS) {
> + struct s3c24xx_txd *txd;
> + struct s3c24xx_sg *dsg;
> +
> + vd = vchan_find_desc(&s3cchan->vc, cookie);
> + if (vd) {
> + /* On the issued list, so hasn't been processed yet */
> + txd = to_s3c24xx_txd(&vd->tx);
> +
> + list_for_each_entry(dsg, &txd->dsg_list, node)
> + bytes += dsg->len;
> + } else {
> + /*
> + * Currently running, so sum over the pending sg's and
> + * the currently active one.
> + */
> + txd = s3cchan->at;
> +
> + dsg = list_entry(txd->at, struct s3c24xx_sg, node);
> + list_for_each_entry_from(dsg, &txd->dsg_list, node);
> + bytes += dsg->len;
> +
> + bytes += s3c24xx_dma_getbytes_chan(s3cchan);
> + }
> + }
> + spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
> +
> + /*
> + * This cookie not complete yet
> + * Get number of bytes left in the active transactions and queue
> + */
> + dma_set_residue(txstate, bytes);
> +
> + /* Whether waiting or running, we're in progress */
> + return ret;
Aprt form this driver looks fine to me...
~Vinod
--
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
