[PATCH 5/6] spi/s3c64xx: Factor transfer start out of enable/disable_cs()

[Mark Brown]

From: Mark Brown <broo...@linaro.org>

The hardware level /CS handling is tied to the start of the data path so
is rolled into the same function as we use to manipulate GPIO /CS. In
order to support factoring out the /CS handling into the core separate the
two and explicitly start transfers separately to the /CS handling.

Signed-off-by: Mark Brown <broo...@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 43caeee..2ab96fb 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -570,9 +570,6 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data 
*sdd,
 
        if (spi->cs_gpio >= 0)
                gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0);
-
-       /* Start the signals */
-       writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
 }
 
 static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
@@ -702,9 +699,6 @@ static inline void disable_cs(struct 
s3c64xx_spi_driver_data *sdd,
 
        if (spi->cs_gpio >= 0)
                gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
-
-       /* Quiese the signals */
-       writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
 }
 
 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
@@ -930,6 +924,9 @@ static int s3c64xx_spi_transfer_one_message(struct 
spi_master *master,
                /* Slave Select */
                enable_cs(sdd, spi);
 
+               /* Start the signals */
+               writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+
                spin_unlock_irqrestore(&sdd->lock, flags);
 
                status = wait_for_xfer(sdd, xfer, use_dma);
@@ -970,10 +967,14 @@ static int s3c64xx_spi_transfer_one_message(struct 
spi_master *master,
        }
 
 out:
-       if (!cs_toggle || status)
+       if (!cs_toggle || status) {
+               /* Quiese the signals */
+               writel(S3C64XX_SPI_SLAVE_SIG_INACT,
+                      sdd->regs + S3C64XX_SPI_SLAVE_SEL);
                disable_cs(sdd, spi);
-       else
+       } else {
                sdd->tgl_spi = spi;
+       }
 
        s3c64xx_spi_unmap_mssg(sdd, msg);
 
@@ -1112,11 +1113,13 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
        }
 
        pm_runtime_put(&sdd->pdev->dev);
+       writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
        disable_cs(sdd, spi);
        return 0;
 
 setup_exit:
        /* setup() returns with device de-selected */
+       writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
        disable_cs(sdd, spi);
 
        gpio_free(cs->line);
-- 
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html