Hi Kishon, > From: Kishon Vijay Abraham I [mailto:kis...@ti.com] > Sent: Friday, October 25, 2013 5:44 PM > > Hi, > > On Friday 25 October 2013 07:45 PM, Kamil Debski wrote: > > Add support for Exynos 5250. This is work-in-progress commit. Not for > > merging. > > > > Signed-off-by: Kamil Debski <k.deb...@samsung.com> > > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > > --- > > drivers/phy/Kconfig | 7 + > > drivers/phy/Makefile | 1 + > > drivers/phy/phy-exynos-usb.c | 10 + > > drivers/phy/phy-exynos-usb.h | 1 + > > drivers/phy/phy-exynos5250-usb.c | 411 > > ++++++++++++++++++++++++++++++++++++++ > > 5 files changed, 430 insertions(+) > > create mode 100644 drivers/phy/phy-exynos5250-usb.c > > > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index > > 2f7ac0a..0f598d0 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -36,4 +36,11 @@ config PHY_EXYNOS4212_USB > > help > > Enable USB PHY support for Exynos 4212 > > > > +config PHY_EXYNOS5250_USB > > + bool "Support for Exynos 5250" > > + depends on PHY_EXYNOS_USB > > This should be a separate driver. Not necessary to use PHY_EXYNOS_USB. > > + depends on SOC_EXYNOS5250 > > + help > > + Enable USB PHY support for Exynos 5250 > > + > > endmenu > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index > > ca3dc82..0dff0dd 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o > > obj-$(CONFIG_PHY_EXYNOS_USB) += phy-exynos-usb.o > > obj-$(CONFIG_PHY_EXYNOS4210_USB) += phy-exynos4210-usb.o > > obj-$(CONFIG_PHY_EXYNOS4212_USB) += phy-exynos4212-usb.o > > +obj-$(CONFIG_PHY_EXYNOS5250_USB) += phy-exynos5250-usb.o > > diff --git a/drivers/phy/phy-exynos-usb.c > > b/drivers/phy/phy-exynos-usb.c index d4a26df..172b774 100644 > > --- a/drivers/phy/phy-exynos-usb.c > > +++ b/drivers/phy/phy-exynos-usb.c > > @@ -212,6 +212,10 @@ extern const struct uphy_config > > exynos4210_uphy_config; extern const struct uphy_config > > exynos4212_uphy_config; #endif > > > > +#ifdef CONFIG_PHY_EXYNOS5250_USB > > +extern const struct uphy_config exynos5250_uphy_config; #endif > > + > > static const struct of_device_id exynos_uphy_of_match[] = { #ifdef > > CONFIG_PHY_EXYNOS4210_USB > > { > > @@ -225,6 +229,12 @@ static const struct of_device_id > exynos_uphy_of_match[] = { > > .data = &exynos4212_uphy_config, > > }, > > #endif > > +#ifdef CONFIG_PHY_EXYNOS5250_USB > > + { > > + .compatible = "samsung,exynos5250-usbphy", > > + .data = &exynos5250_uphy_config, > > + }, > > +#endif > > { }, > > }; > > > > diff --git a/drivers/phy/phy-exynos-usb.h > > b/drivers/phy/phy-exynos-usb.h index f45cb3c..a9febfa 100644 > > --- a/drivers/phy/phy-exynos-usb.h > > +++ b/drivers/phy/phy-exynos-usb.h > > @@ -42,6 +42,7 @@ enum samsung_cpu_type { > > TYPE_S3C64XX, > > TYPE_EXYNOS4210, > > TYPE_EXYNOS4212, > > + TYPE_EXYNOS5250, > > No cpu types here. > > }; > > > > enum uphy_state { > > diff --git a/drivers/phy/phy-exynos5250-usb.c > > b/drivers/phy/phy-exynos5250-usb.c > > new file mode 100644 > > index 0000000..156093b > > --- /dev/null > > +++ b/drivers/phy/phy-exynos5250-usb.c > > @@ -0,0 +1,411 @@ > > +/* > > + * Samsung S5P/EXYNOS SoC series USB PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski <k.deb...@samsung.com> > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include <linux/clk.h> > > +#include <linux/delay.h> > > +#include <linux/io.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/phy/phy.h> > > +#include <linux/platform_device.h> > > +#include <linux/spinlock.h> > > +#include "phy-exynos-usb.h" > > + > > +/* Exynos USB PHY registers */ > > +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0 > > +#define EXYNOS_5250_REFCLKSEL_XO 0x1 > > +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2 > > + > > +#define EXYNOS_5250_FSEL_9MHZ6 0x0 > > +#define EXYNOS_5250_FSEL_10MHZ 0x1 > > +#define EXYNOS_5250_FSEL_12MHZ 0x2 > > +#define EXYNOS_5250_FSEL_19MHZ2 0x3 > > +#define EXYNOS_5250_FSEL_20MHZ 0x4 > > +#define EXYNOS_5250_FSEL_24MHZ 0x5 > > +#define EXYNOS_5250_FSEL_50MHZ 0x7 > > + > > +/* Normal host */ > > +#define EXYNOS_5250_HOSTPHYCTRL0 0x0 > > + > > +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL (0x1 << 31) > > +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19 > > +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \ > > + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT) > > +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16 > > +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \ > > + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT) > > +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN (0x1 << 11) > > +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE (0x1 << 10) > > +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N (0x1 << 9) > > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7) > > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7) > > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7) > > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7) > > +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ (0x1 << 6) > > +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP (0x1 << 5) > > +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND (0x1 << 4) > > +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE (0x1 << 3) > > +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST (0x1 << 2) > > +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST (0x1 << 1) > > +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST (0x1 << 0) > > + > > +/* HSIC0 & HSCI1 */ > > +#define EXYNOS_5250_HOSTPHYCTRL1 0x10 > > +#define EXYNOS_5250_HOSTPHYCTRL2 0x20 > > + > > +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKSEL_MASK (0x3 << 23) > > +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKDIV_MASK (0x7f << 16) > > +#define EXYNOS_5250_HOSTPHYCTRLX_SIDDQ (0x1 << 6) > > +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESLEEP (0x1 << 5) > > +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESUSPEND (0x1 << 4) > > +#define EXYNOS_5250_HOSTPHYCTRLX_WORDINTERFACE (0x1 << 3) > > +#define EXYNOS_5250_HOSTPHYCTRLX_UTMISWRST (0x1 << 2) > > +#define EXYNOS_5250_HOSTPHYCTRLX_PHYSWRST (0x1 << 0) > > + > > +/* EHCI control */ > > +#define EXYNOS_5250_HOSTEHCICTRL 0x30 > > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN (0x1 << 29) > > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 (0x1 << 28) > > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 (0x1 << 27) > > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 (0x1 << 26) > > +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN (0x1 << 25) > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19 > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ > > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13 > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \ > > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT) > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7 > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ > > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1 > > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \ > > + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT) > > +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE (0x1 << 0) > > + > > +/* OHCI control */ > > +#define EXYNOS_5250_HOSTOHCICTRL 0x34 > > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1 > > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \ > > + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT) > > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN (0x1 << 0) > > + > > +/* USBOTG */ > > +#define EXYNOS_5250_USBOTGSYS 0x38 > > +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET (0x1 << 14) > > +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG (0x1 << 13) > > +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST (0x1 << 12) > > +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9 > > +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \ > > + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT) > > +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP (0x1 << 8) > > +#define EXYNOS_5250_USBOTGSYS_COMMON_ON (0x1 << 7) > > +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4 > > +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \ > > + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT) > > +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP (0x1 << 3) > > +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE (0x1 << 2) > > +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG (0x1 << 1) > > +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND (0x1 << 0) > > + > > +/* Isolation, configured in the power management unit */ > > +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x0 > > +#define EXYNOS_5250_USB_ISOL_OTG (1 << 0) > > +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x4 > > +#define EXYNOS_5250_USB_ISOL_HOST (1 << 0) > > + > > +enum exynos4x12_phy_id { > > + EXYNOS5250_DEVICE, > > + EXYNOS5250_HOST, > > + EXYNOS5250_HSIC0, > > + EXYNOS5250_HSIC1, > > + EXYNOS5250_NUM_PHYS, > > +}; > > + > > +/* exynos5250_rate_to_clk() converts the supplied clock rate to the > > +value that > > + * can be written to the phy register. */ > > Follow coding guidelines ;-) > > +static u32 exynos5250_rate_to_clk(unsigned long rate) { > > + unsigned int clksel; > > + > > + /* EXYNOS_5250_FSEL_MASK */ > > + > > + switch (rate) { > > + case 9600 * KHZ: > > + clksel = EXYNOS_5250_FSEL_9MHZ6; > > + break; > > + case 10 * MHZ: > > + clksel = EXYNOS_5250_FSEL_10MHZ; > > + break; > > + case 12 * MHZ: > > + clksel = EXYNOS_5250_FSEL_12MHZ; > > + break; > > + case 19200 * KHZ: > > + clksel = EXYNOS_5250_FSEL_19MHZ2; > > + break; > > + case 20 * MHZ: > > + clksel = EXYNOS_5250_FSEL_20MHZ; > > + break; > > + case 24 * MHZ: > > + clksel = EXYNOS_5250_FSEL_24MHZ; > > + break; > > + case 50 * MHZ: > > + clksel = EXYNOS_5250_FSEL_50MHZ; > > + break; > > + default: > > + clksel = CLKSEL_ERROR; > > + } > > + > > + return clksel; > > +} > > + > > +static void exynos5250_isol(struct uphy_instance *inst, bool on) { > > + struct uphy_driver *drv = inst->drv; > > + u32 offset; > > + u32 mask; > > + u32 tmp; > > + > > + if (!drv->reg_isol) > > + return; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS5250_DEVICE: > > + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; > > + mask = EXYNOS_5250_USB_ISOL_OTG; > > + break; > > + case EXYNOS5250_HOST: > > + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; > > + mask = EXYNOS_5250_USB_ISOL_HOST; > > + break; > > + default: > > + return; > > + }; > > + > > + tmp = readl(drv->reg_isol + offset); > > + if (on) > > + tmp &= ~mask; > > + else > > + tmp |= mask; > > + writel(tmp, drv->reg_isol + offset); } > > + > > +static void exynos5250_phy_pwr(struct uphy_instance *inst, bool on) > { > > + struct uphy_driver *drv = inst->drv; > > + u32 ctrl0; > > + u32 otg; > > + u32 ehci; > > + u32 ohci; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS5250_DEVICE: > > + writel(0, drv->reg_mode); > > + > > + /* OTG configuration */ > > + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); > > + /* The clock */ > > + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; > > + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; > > + /* Reset */ > > + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | > > + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | > > + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); > > + /* TODO: Clear 4 bits as the old driver does. */ > > + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | > > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | > > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | > > + EXYNOS_5250_USBOTGSYS_OTGDISABLE; > > + /* Ref clock */ > > + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; > > + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << > > + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; > > + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); > > + udelay(10); > > + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | > > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | > > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); > > + > > + > > + break; > > + case EXYNOS5250_HOST: > > + /* Host registers configuration */ > > + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); > > + /* The clock */ > > + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK; > > + ctrl0 |= inst->clk << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT; > > + > > + /* Reset */ > > + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | > > + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL | > > + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | > > + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | > > + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP); > > + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | > > + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST | > > + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N; > > + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); > > + udelay(10); > > + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | > > + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST); > > + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); > > + > > + /* OTG configuration */ > > + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); > > + /* The clock */ > > + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; > > + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; > > + /* Reset */ > > + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | > > + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | > > + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); > > + /* TODO: Clear 4 bits as the old driver does. */ > > + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | > > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | > > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | > > + EXYNOS_5250_USBOTGSYS_OTGDISABLE; > > + /* Ref clock */ > > + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; > > + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << > > + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; > > + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); > > + udelay(10); > > + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | > > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | > > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); > > + > > + /* Enable EHCI DMA burst */ > > + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); > > + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN | > > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 | > > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 | > > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16; > > + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); > > + > > + /* OHCI settings */ > > + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); > > + /* Let's do some undocumented magic (based on the old > driver) */ > > + ohci |= 0x1 << 3; > > + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); > > + > > + break; > > + } > > +} > > + > > +static int exynos5250_power_on(struct uphy_instance *inst) { > > + struct uphy_driver *drv = inst->drv; > > + > > + if (inst->state == STATE_ON) { > > + dev_err(drv->dev, "usb phy \"%s\" already on", > > + inst->cfg->label); > > + return -ENODEV; > > + } > > + > > + inst->state = STATE_ON; > > + inst->ref_cnt++; > > + if (inst->ref_cnt > 1) > > + return 0; > > + > > + exynos5250_phy_pwr(inst, 1); > > + exynos5250_isol(inst, 0); > > + > > + /* Power on the device, as it is necessary for HSIC to work */ > > + if (inst->cfg->id == EXYNOS5250_HSIC0) { > > + struct uphy_instance *device = > > + &drv->uphy_instances[EXYNOS5250_DEVICE]; > > + device->ref_cnt++; > > + if (device->ref_cnt > 1) > > + return 0; > > + exynos5250_phy_pwr(device, 1); > > + exynos5250_isol(device, 0); > > + } > > + > > + return 0; > > +} > > + > > +static int exynos5250_power_off(struct uphy_instance *inst) { > > + struct uphy_driver *drv = inst->drv; > > + > > + if (inst->state == STATE_OFF) { > > + dev_err(drv->dev, "usb phy \"%s\" already off", > > + inst->cfg->label); > > + return -EINVAL; > > + } > > + > > + inst->state = STATE_OFF; > > + inst->ref_cnt--; > > + > > + if (inst->ref_cnt > 0) > > + return 0; > > + > > + exynos5250_isol(inst, 1); > > + exynos5250_phy_pwr(inst, 0); > > + > > + if (inst->cfg->id == EXYNOS5250_HSIC0) { > > + struct uphy_instance *device = > > + &drv->uphy_instances[EXYNOS5250_DEVICE]; > > + device->ref_cnt--; > > + if (device->ref_cnt > 0) > > + return 0; > > + exynos5250_isol(device, 1); > > + exynos5250_phy_pwr(device, 0); > > + } > > + > > + return 0; > > +} > > + > > + > > +static const struct common_phy exynos5250_phys[] = { > > + { > > + .label = "device", > > + .type = PHY_DEVICE, > > + .id = EXYNOS5250_DEVICE, > > + .rate_to_clk = exynos5250_rate_to_clk, > > + .power_on = exynos5250_power_on, > > + .power_off = exynos5250_power_off, > > + }, > > + { > > + .label = "host", > > + .type = PHY_HOST, > > + .id = EXYNOS5250_HOST, > > + .rate_to_clk = exynos5250_rate_to_clk, > > + .power_on = exynos5250_power_on, > > + .power_off = exynos5250_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .type = PHY_HOST, > > + .id = EXYNOS5250_HSIC0, > > + .rate_to_clk = exynos5250_rate_to_clk, > > + .power_on = exynos5250_power_on, > > + .power_off = exynos5250_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .type = PHY_HOST, > > + .id = EXYNOS5250_HSIC1, > > + .rate_to_clk = exynos5250_rate_to_clk, > > + .power_on = exynos5250_power_on, > > + .power_off = exynos5250_power_off, > > + }, > > + {}, > > +}; > > All this can be removed if you don't use exynos common PHY.
Ok. Now, I think, I start to understand you better. Still there is the question - one single driver or many small drivers with repeated code. > > Thanks > Kishon Best wishes, -- Kamil Debski Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
