On Tue, Nov 5, 2013 at 5:33 PM, Jingoo Han <jg1....@samsung.com> wrote: > On Tuesday, November 05, 2013 8:13 PM, Jingoo Han wrote: >> On Tuesday, November 05, 2013 6:37 PM, Kamil Debski wrote: >> > On Tuesday, November 05, 2013 8:20 AM, Vivek Gautam wrote: >> > > On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay Abraham I <kis...@ti.com> >> > > wrote: >> > > > On Monday 04 November 2013 03:45 PM, Kamil Debski wrote: >> > > >> On Monday, November 04, 2013 7:55 AM, Kishon Vijay Abraham I wrote: >> > > >>> On Thursday 31 October 2013 01:15 PM, Vivek Gautam wrote: >> > > >>>> >> > > >>>> Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. >> > > >>>> The new driver uses the generic PHY framework and will interact >> > > >>>> with >> > > >>>> DWC3 controller present on Exynos5 series of SoCs. >> > > >>> >> > > >>> >> > > >>> In Exynos, you have a single IP that supports both USB3 and USB2 >> > > PHY >> > > >>> right? I think that needs to be mentioned here. >> > > >> >> > > >> >> > > >> As far as I know the IP is different. >> > > > >> > > > >> > > > Ok. Sometime back Vivek was mentioning about a single IP for both >> > > USB3 >> > > > and USB2. Thought it should be this driver. Anyway thanks for the >> > > clarification. >> > > >> > > Right Kishon, I had mentioned that Exynos5's dwc3 controller have a >> > > single IP for USB2 and USB3 phy. >> > > From what i see, on exynos5 systems the dwc3 controller uses a combo of >> > > usb 2 (utmi+) and usb 3 (pipe 3) phy (with base address starting >> > > 0x12100000). >> > > >> > > Kamil, Tomasz, >> > > >> > > Please correct me if i am wrong. >> > >> > I have the Exynos 5250 documentation and I found two phy register ranges: >> > 1) USB 2.0 PHY having the base address of 0x1213 0000 >> > Chapter 33. USB 2.0 Host Controller >> > Subchapter 33.5.2 Phy Control Register p. 1696 >> > First register's description is >> > "USB2.0 phy control register" >> > 2) USB 3.0 PHY (I guess) with the base address 0x1210 0000 >> > Chapter 35. USB 3.0 DRD Controller >> > Subchapter 35.4.6 PHY Control Register p. 1872 >> > >> > Jingoo, could you comment on the above? You may know more than we do :) >> >> Hi Kamil, >> >> Thank you for trusting me. :-) >> I just asked my validation engineer about 5250 USB PHY.
Thank you for clarifying this. This was really kind of you to help in making things clear. >> As I know, she has the best knowledge about Samsung SoC USB hardware. >> She said that there are 2 PHY controllers such as USB 2.0 PHY, USB 3.0 PHY. >> >> 1) USB2.0 PHY: USB2.0 HOST, USB2.0 Device >> 2) USB3.0 PHY: USB3.0 DRD (3.0 HOST & 3.0 Device) >> >> > In addition, I have a question to you Vivek - does your USB 3.0 >> > PHY support both host and device? >> >> According to her, USB3.0 PHY can support both 3.0 Host and 3.0 Device. >> Thank you. > > In addition to this, > > Vivek's comment is also right. :-) > A few minutes ago, I asked one of my USB S/W engineers. > > USB3.0 PHY consists of two blocks such as 3.0 block and 2.0 block. > This USB3.0 PHY can support UTMI+ and PIPE3 interface for 3.0 block > and 2.0 block, respectively. > > Conclusion: > > 1) USB2.0 PHY: USB2.0 HOST, USB2.0 Device > Base address: 0x1213 0000 > > 2) USB3.0 PHY: USB3.0 DRD (3.0 HOST & 3.0 Device) > Base address: 0x1210 0000 > 2.0 block(UTMI+) & 3.0 block(PIPE3) And this is ofcourse the PHY used by DWC3 controller, which works at both High speed as well as Super Speed. Right ? > > > Best regards, > Jingoo Han > -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html