Hi Arun,
> From: "Arjun.K.V" <arjun...@samsung.com>
>
> The patch adds cpufreq driver for exynos5420.
>
> Signed-off-by: Arjun.K.V <arjun...@samsung.com>
> Signed-off-by: Andrew Bresticker <abres...@chromium.org>
> Signed-off-by: Arun Kumar K <arun...@samsung.com>
> ---
> drivers/cpufreq/Kconfig.arm | 11 ++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/exynos-cpufreq.c | 2 +
> drivers/cpufreq/exynos-cpufreq.h | 8 +
> drivers/cpufreq/exynos5420-cpufreq.c | 346
> ++++++++++++++++++++++++++++++++++ 5 files changed, 368 insertions(+)
> create mode 100644 drivers/cpufreq/exynos5420-cpufreq.c
I think that we shall cleanup "a bit" the cpufreq code for exynos.
Now we have [*]:
- exynos4x12-cpufreq.c
- exynos4210-cpufreq.c
- exynos5250-cpufreq.c
and you want to add exynos5420-cpufreq.c
Those files are pretty similar, so are a very good candidates for
cleanup.
All supported processors (up to exynos5250) allows for frequency
setting on all cores in the SoC.
Those files [*] can be easily replaced by cpu0-cpufreq.c generic code.
Also we can provide frequency, voltage table and ASV if needed via
device tree.
I did some preliminary work on this for Exynos4412. My plan is to
continue when things with BOOST "calm down" :-).
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index ce52ed9..96769fe 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -51,6 +51,17 @@ config ARM_EXYNOS5250_CPUFREQ
>
> If in doubt, say N.
>
> +config ARM_EXYNOS5420_CPUFREQ
> + bool "SAMSUNG EXYNOS5420"
> + depends on SOC_EXYNOS5420
> + default y
> + select ARM_EXYNOS_CPUFREQ
> + help
> + This adds the CPUFreq driver for Samsung EXYNOS5420
> + SoC.
> +
> + If in doubt, say N.
> +
> config ARM_EXYNOS5440_CPUFREQ
> bool "SAMSUNG EXYNOS5440"
> depends on SOC_EXYNOS5440
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 7494565..802c251 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) +=
> exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) +=
> exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) +=
> exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) +=
> exynos5250-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS5420_CPUFREQ) +=
> exynos5420-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) +=
> exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) +=
> highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) +=
> imx6q-cpufreq.o diff --git a/drivers/cpufreq/exynos-cpufreq.c
> b/drivers/cpufreq/exynos-cpufreq.c index f3c2287..ac556eb 100644
> --- a/drivers/cpufreq/exynos-cpufreq.c
> +++ b/drivers/cpufreq/exynos-cpufreq.c
> @@ -246,6 +246,8 @@ static int __init exynos_cpufreq_init(void)
> ret = exynos4x12_cpufreq_init(exynos_info);
> else if (soc_is_exynos5250())
> ret = exynos5250_cpufreq_init(exynos_info);
> + else if (soc_is_exynos5420())
> + ret = exynos5420_cpufreq_init(exynos_info);
> else
> return 0;
>
> diff --git a/drivers/cpufreq/exynos-cpufreq.h
> b/drivers/cpufreq/exynos-cpufreq.h index 7f25cee..d2f3d1e 100644
> --- a/drivers/cpufreq/exynos-cpufreq.h
> +++ b/drivers/cpufreq/exynos-cpufreq.h
> @@ -67,3 +67,11 @@ static inline int exynos5250_cpufreq_init(struct
> exynos_dvfs_info *info) return -EOPNOTSUPP;
> }
> #endif
> +#ifdef CONFIG_ARM_EXYNOS5420_CPUFREQ
> +extern int exynos5420_cpufreq_init(struct exynos_dvfs_info *);
> +#else
> +static inline int exynos5420_cpufreq_init(struct exynos_dvfs_info
> *info) +{
> + return -EOPNOTSUPP;
> +}
> +#endif
> diff --git a/drivers/cpufreq/exynos5420-cpufreq.c
> b/drivers/cpufreq/exynos5420-cpufreq.c new file mode 100644
> index 0000000..728ce71
> --- /dev/null
> +++ b/drivers/cpufreq/exynos5420-cpufreq.c
> @@ -0,0 +1,346 @@
> +/*
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * EXYNOS5420 - CPU frequency scaling support
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +#include <linux/kernel.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/cpufreq.h>
> +
> +#include <mach/map.h>
> +#include <mach/regs-clock.h>
> +
> +#include "exynos-cpufreq.h"
> +
> +#define CPUFREQ_NUM_LEVELS (L18 + 1)
> +#define EXYNOS5_CLKDIV_STATCPU0_MASK 0x11111111
> +#define EXYNOS5_CLKDIV_STATCPU1_MASK 0x111
> +
> +static struct clk *mout_cpu;
> +static struct clk *mout_mspll_cpu;
> +static struct clk *mout_apll;
> +static struct clk *fout_apll;
> +static struct clk *fout_spll;
> +
> +struct cpufreq_clkdiv {
> + unsigned int index;
> + unsigned int clkdiv;
> + unsigned int clkdiv1;
> +};
> +
> +static unsigned int exynos5420_volt_table[CPUFREQ_NUM_LEVELS];
> +static struct cpufreq_frequency_table exynos5420_freq_table[] = {
> + {L0, 2000 * 1000},
> + {L1, 1900 * 1000},
> + {L2, 1800 * 1000},
> + {L3, 1700 * 1000},
> + {L4, 1600 * 1000},
> + {L5, 1500 * 1000},
> + {L6, 1400 * 1000},
> + {L7, 1300 * 1000},
> + {L8, 1200 * 1000},
> + {L9, 1100 * 1000},
> + {L10, 1000 * 1000},
> + {L11, 900 * 1000},
> + {L12, 800 * 1000},
> + {L13, 700 * 1000},
> + {L14, 600 * 1000},
> + {L15, 500 * 1000},
> + {L16, 400 * 1000},
> + {L17, 300 * 1000},
> + {L18, 200 * 1000},
> + {0, CPUFREQ_TABLE_END},
> +};
This shall be provided via device tree.
> +
> +static struct cpufreq_clkdiv
> exynos5420_clkdiv_table[CPUFREQ_NUM_LEVELS]; +
> +static unsigned int clkdiv_cpu0_5420[CPUFREQ_NUM_LEVELS][7] = {
> + /*
> + * Clock divider values for {CPUD, ATB, PCLK_DBG, APLL,
> ARM2}
> + */
> + { 2, 7, 7, 3, 0 }, /* ARM L0: 2.0GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L1: 1.9GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L2: 1.8GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L3: 1.7GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L4: 1.6GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L5: 1.5GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L6: 1.4GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L7: 1.3GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L8: 1.2GHz */
> + { 2, 7, 7, 3, 0 }, /* ARM L9: 1.1GHz */
> + { 2, 6, 6, 3, 0 }, /* ARM L10: 1GHz */
> + { 2, 6, 6, 3, 0 }, /* ARM L11: 900MHz */
> + { 2, 5, 5, 3, 0 }, /* ARM L12: 800MHz */
> + { 2, 5, 5, 3, 0 }, /* ARM L13: 700MHz */
> + { 2, 4, 4, 3, 0 }, /* ARM L14: 600MHz */
> + { 2, 3, 3, 3, 0 }, /* ARM L15: 500MHz */
> + { 2, 3, 3, 3, 0 }, /* ARM L16: 400MHz */
> + { 2, 3, 3, 3, 0 }, /* ARM L17: 300MHz */
> + { 2, 3, 3, 3, 0 }, /* ARM L18: 200MHz */
> +};
This table is not needed (as similar ones in this patch), since the
Common Clock Framework (and more specific the PLL code for Exynos)
shall handle this.
> +
> +unsigned int clkdiv_cpu1_5420[CPUFREQ_NUM_LEVELS][2] = {
> + /* Clock divider values for { copy, HPM } */
> + { 7, 7 }, /* ARM L0: 2.0GHz */
> + { 7, 7 }, /* ARM L1: 1.9GHz */
> + { 7, 7 }, /* ARM L2: 1.8GHz */
> + { 7, 7 }, /* ARM L3: 1.7GHz */
> + { 7, 7 }, /* ARM L4: 1.6GHz */
> + { 7, 7 }, /* ARM L5: 1.5GHz */
> + { 7, 7 }, /* ARM L6: 1.4GHz */
> + { 7, 7 }, /* ARM L7: 1.3GHz */
> + { 7, 7 }, /* ARM L8: 1.2GHz */
> + { 7, 7 }, /* ARM L9: 1.1GHz */
> + { 7, 7 }, /* ARM L10: 1GHz */
> + { 7, 7 }, /* ARM L11: 900MHz */
> + { 7, 7 }, /* ARM L12: 800MHz */
> + { 7, 7 }, /* ARM L13: 700MHz */
> + { 7, 7 }, /* ARM L14: 600MHz */
> + { 7, 7 }, /* ARM L15: 500MHz */
> + { 7, 7 }, /* ARM L16: 400MHz */
> + { 7, 7 }, /* ARM L17: 300MHz */
> + { 7, 7 }, /* ARM L18: 200MHz */
> +};
> +
> +/*
> + * Default ASV table
> + */
> +static const unsigned int asv_voltage_5420[CPUFREQ_NUM_LEVELS] = {
> + 1300000, /* L0 2000 */
> + 1300000, /* L1 1900 */
> + 1200000, /* L2 1800 */
> + 1200000, /* L3 1700 */
> + 1200000, /* L4 1600 */
> + 1175000, /* L5 1500 */
> + 1150000, /* L6 1400 */
> + 1125000, /* L7 1300 */
> + 1100000, /* L8 1200 */
> + 1075000, /* L9 1100 */
> + 1050000, /* L10 1000 */
> + 1000000, /* L11 900 */
> + 950000, /* L12 800 */
> + 925000, /* L13 700 */
> + 900000, /* L14 600 */
> + 900000, /* L15 500 */
> + 900000, /* L16 400 */
> + 900000, /* L17 300 */
> + 900000, /* L18 200 */
> +};
> +
If I remember correctly, some code for ASV generic framework has
been posted recently (by Sachin):
http://article.gmane.org/gmane.linux.power-management.general/40453/match=asv+framework
> +static void exynos5420_set_clkdiv(unsigned int div_index)
> +{
> + unsigned int tmp;
> +
> + /* Change Divider - CPU0 for CMU_CPU */
> + tmp = exynos5420_clkdiv_table[div_index].clkdiv;
> + __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
> +
> + do {
> + cpu_relax();
> + tmp = __raw_readl(EXYNOS5_CLKDIV_STATCPU0);
> + } while (tmp & EXYNOS5_CLKDIV_STATCPU0_MASK);
> + pr_debug("DIV_CPU0[0x%x]\n",
> __raw_readl(EXYNOS5_CLKDIV_CPU0)); +
> + /* Change Divider - CPU1 for CMU_CPU */
> + tmp = exynos5420_clkdiv_table[div_index].clkdiv1;
> + __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
> +
> + do {
> + cpu_relax();
> + tmp = __raw_readl(EXYNOS5_CLKDIV_STATCPU1);
> + } while (tmp & EXYNOS5_CLKDIV_STATCPU1_MASK);
> + pr_debug("DIV_CPU1[0x%x]\n",
> __raw_readl(EXYNOS5_CLKDIV_CPU1)); +}
> +
Operations on raw registers - behind the Common Clock Framework is
asking for a trouble. I had a similar issues. Please refer to
appropriate Exynos4412/4210 patches.
http://article.gmane.org/gmane.linux.kernel/1575500/match=cpufreq
> +static void exynos5420_set_apll(unsigned int new_index,
> + unsigned int old_index)
> +{
> + unsigned int tmp;
> + unsigned long rate;
> +
> + clk_prepare_enable(fout_spll);
> + /* 1. MUX_CORE_SEL = MOUT_MSPLL; ARMCLK uses MOUT_MSPLL for
> lock time */
> + if (clk_set_parent(mout_cpu, mout_mspll_cpu))
> + pr_err(KERN_ERR "Unable to set parent of clock
> mout_cpu\n"); +
> + do {
> + cpu_relax();
> + tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
> + tmp &= EXYNOS5_CLKMUX_STATCPU_MUXCORE_MASK;
> + } while (tmp != (0x2 << EXYNOS5_CLKSRC_CPU_MUXCORE_SHIFT));
> +
> + /* 2. Set APLL rate */
> + rate = exynos5420_freq_table[new_index].frequency * 1000;
> + if (clk_set_rate(fout_apll, rate))
> + pr_err("Unable to change apll rate to %lu\n", rate);
> +
> + /* 3. MUX_CORE_SEL = APLL */
> + if (clk_set_parent(mout_cpu, mout_apll))
> + pr_err("Unable to set parent of clock mout_cpu\n");
> +
> + do {
> + cpu_relax();
> + tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
> + tmp &= EXYNOS5_CLKMUX_STATCPU_MUXCORE_MASK;
> + } while (tmp != (0x1 << EXYNOS5_CLKSRC_CPU_MUXCORE_SHIFT));
> +
> + clk_disable_unprepare(fout_spll);
> +}
> +
> +static bool exynos5420_pms_change(unsigned int old_index,
> + unsigned int new_index)
> +{
> + /*
> + * The Exynos cpufreq driver uses this to determine if it can
> + * avoid changing the CPU voltage and re-parenting the CPU
> clock
> + * while chaning the PLL rate. Because we're using CCF to
> change
> + * the PLL rate, we no longer have access to the PLL divider
> table,
> + * so we can't tell whether or not we can take the fast path
> from
> + * here and must always take the slow path. Since this only
> affects
> + * a few transitions, there should hopefully be no impact on
> + * performance.
> + */
> + return (old_index != new_index);
> +}
This code shall be handled at PLL driver.
> +static void exynos5420_set_frequency(unsigned int old_index,
> + unsigned int new_index)
> +{
> + if (old_index > new_index) {
> + /* 1. Change the system clock divider values */
> + exynos5420_set_clkdiv(new_index);
> + /* 2. Change the apll rate */
> + exynos5420_set_apll(new_index, old_index);
> + } else if (old_index < new_index) {
> + /* 1. Change the apll rate */
> + exynos5420_set_apll(new_index, old_index);
> + /* 2. Change the system clock divider values */
> + exynos5420_set_clkdiv(new_index);
> + }
> +}
Please refer to Exynos4412 cpufreq code.
> +
> +static void __init set_volt_table(void)
> +{
> + unsigned int i;
> + unsigned int asv_volt = 0;
> +
> + for (i = 0; i < CPUFREQ_NUM_LEVELS; i++) {
> +#ifdef CONFIG_ARM_EXYNOS5420_ASV
> + asv_volt = get_match_volt
> + (ID_ARM, exynos5420_freq_table[i].frequency);
> +#endif
> + if (!asv_volt)
> + exynos5420_volt_table[i] =
> asv_voltage_5420[i];
> + else
> + exynos5420_volt_table[i] = asv_volt;
> + pr_debug("CPUFREQ of CA15 L%d : %d uV\n", i,
> + exynos5420_volt_table[i]);
> + }
> + for (i = L0; i < L2; i++)
> + exynos5420_freq_table[i].frequency =
> CPUFREQ_ENTRY_INVALID;
> + for (i = L14; i <= L18; i++)
> + exynos5420_freq_table[i].frequency =
> CPUFREQ_ENTRY_INVALID; +}
> +
This shall be parsed from device tree or the ASV generic framework
shall be used.
> +int exynos5420_cpufreq_init(struct exynos_dvfs_info *info)
> +{
> + int i;
> + unsigned int tmp;
> + unsigned long rate;
> + struct clk *sclk_spll;
> +
> + set_volt_table();
> +
> + mout_cpu = clk_get(NULL, "mout_cpu");
> + if (IS_ERR(mout_cpu))
> + return PTR_ERR(mout_cpu);
> +
> + mout_mspll_cpu = clk_get(NULL, "mout_mspll_cpu");
> + if (IS_ERR(mout_mspll_cpu))
> + goto err_mout_mspll_cpu;
> +
> + sclk_spll = clk_get(NULL, "mout_spll");
> + if (IS_ERR(sclk_spll))
> + goto err_sclk_spll;
> + clk_set_parent(mout_mspll_cpu, sclk_spll);
> + clk_put(sclk_spll);
> +
> + fout_spll = clk_get(NULL, "fout_spll");
> + if (IS_ERR(fout_spll))
> + goto err_fout_spll;
> +
> + rate = clk_get_rate(mout_mspll_cpu) / 1000;
> +
> + mout_apll = clk_get(NULL, "mout_apll");
> + if (IS_ERR(mout_apll))
> + goto err_mout_apll;
> +
> + fout_apll = clk_get(NULL, "fout_apll");
> + if (IS_ERR(fout_apll))
> + goto err_fout_apll;
> +
> + for (i = L0; i < CPUFREQ_NUM_LEVELS; i++) {
> + exynos5420_clkdiv_table[i].index = i;
> +
> + tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
> + tmp &= ~(EXYNOS5_CLKDIV_CPU0_CPUD_MASK |
> + EXYNOS5_CLKDIV_CPU0_ATB_MASK |
> + EXYNOS5_CLKDIV_CPU0_PCLKDBG_MASK |
> + EXYNOS5_CLKDIV_CPU0_APLL_MASK |
> + EXYNOS5_CLKDIV_CPU0_CORE2_MASK);
> + tmp |= ((clkdiv_cpu0_5420[i][0] <<
> + EXYNOS5_CLKDIV_CPU0_CPUD_SHIFT) |
> + (clkdiv_cpu0_5420[i][1] <<
> + EXYNOS5_CLKDIV_CPU0_ATB_SHIFT) |
> + (clkdiv_cpu0_5420[i][2] <<
> + EXYNOS5_CLKDIV_CPU0_PCLKDBG_SHIFT) |
> + (clkdiv_cpu0_5420[i][3] <<
> + EXYNOS5_CLKDIV_CPU0_APLL_SHIFT) |
> + (clkdiv_cpu0_5420[i][4] <<
> + EXYNOS5_CLKDIV_CPU0_CORE2_SHIFT));
> +
> + exynos5420_clkdiv_table[i].clkdiv = tmp;
> +
> + tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
> + tmp &= ~(EXYNOS5_CLKDIV_CPU1_COPY_MASK |
> + EXYNOS5_CLKDIV_CPU1_HPM_MASK);
> + tmp |= ((clkdiv_cpu1_5420[i][0] <<
> + EXYNOS5_CLKDIV_CPU1_COPY_SHIFT) |
> + (clkdiv_cpu1_5420[i][1] <<
> + EXYNOS5_CLKDIV_CPU1_HPM_SHIFT));
> +
> + exynos5420_clkdiv_table[i].clkdiv1 = tmp;
> + }
> +
> + info->mpll_freq_khz = rate;
> + info->pll_safe_idx = L12;
> + info->cpu_clk = fout_apll;
> + pr_debug("fout_apll[%lu]\n", clk_get_rate(fout_apll));
> + info->volt_table = exynos5420_volt_table;
> + info->freq_table = exynos5420_freq_table;
> + info->set_freq = exynos5420_set_frequency;
> + info->need_apll_change = exynos5420_pms_change;
> +
> + return 0;
> +
> +err_fout_apll:
> + clk_put(fout_apll);
> +err_mout_apll:
> + clk_put(mout_apll);
> +err_fout_spll:
> + clk_put(fout_spll);
> +err_sclk_spll:
> + clk_put(sclk_spll);
> +err_mout_mspll_cpu:
> + clk_put(mout_mspll_cpu);
> +
> + pr_err("%s: failed initialization\n", __func__);
> + return -EINVAL;
> +}
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
