Hi Krzysztof, On 5 March 2014 14:52, Krzysztof Kozlowski <k.kozlow...@samsung.com> wrote: > Add bindings documentation for S2MPS14 device to the s2mps11 driver.
nit: s/s2mps11/S2MPS11 > > Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com> > Cc: Mark Brown <broo...@kernel.org> > Cc: Liam Girdwood <lgirdw...@gmail.com> > Cc: Tomasz Figa <t.f...@samsung.com> > Cc: devicet...@vger.kernel.org > Cc: Rob Herring <robh...@kernel.org> > Cc: Pawel Moll <pawel.m...@arm.com> > Cc: Mark Rutland <mark.rutl...@arm.com> > Cc: Ian Campbell <ijc+devicet...@hellion.org.uk> > Cc: Kumar Gala <ga...@codeaurora.org> > Acked-by: Tomasz Figa <t.f...@samsung.com> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt > b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 15ee89c3cc7b..f69bec294f02 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11 Voltage and Current Regulator > +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. > Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic". > +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the > LDO or BUCK number > as per the datasheet of s2mps11. > > - LDOn > - - valid values for n are 1 to 38 > + - valid values for n are: > + - S2MPS11: 1 to 38 > + - S2MPS14: 1 to 25 > - Example: LDO1, LD02, LDO28 > - BUCKn > - - valid values for n are 1 to 10. > + - valid values for n are: > + - S2MPS11: 1 to 10 > + - S2MPS14: 1 to 5 > - Example: BUCK1, BUCK2, BUCK9 > > Example: > -- > 1.7.9.5 > Looks good. Acked-by: Sachin Kamat <sachin.ka...@linaro.org> -- With warm regards, Sachin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
