On 03/13/2014 12:16 AM, Rahul Sharma wrote:
The patch adds the dts files for exynos5260.

Signed-off-by: Pankaj Dubey <pankaj.du...@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sha...@samsung.com>
Signed-off-by: Arun Kumar K <arun...@samsung.com>
Reviewed-by: Tomasz Figa <t.f...@samsung.com>
---
  arch/arm/boot/dts/exynos5260-pinctrl.dtsi |  574 +++++++++++++++++++++++++++++
  arch/arm/boot/dts/exynos5260.dtsi         |  400 ++++++++++++++++++++
  2 files changed, 974 insertions(+)
  create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi 
b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 0000000..f6ee55e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,574 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE  0
+#define PIN_PULL_DOWN  1
+#define PIN_PULL_UP    3
+
+&pinctrl_0 {
+       gpa0: gpa0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpa1: gpa1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpa2: gpa2 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb0: gpb0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb1: gpb1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb2: gpb2 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb3: gpb3 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb4: gpb4 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpb5: gpb5 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpd0: gpd0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpd1: gpd1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpd2: gpd2 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpe0: gpe0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpe1: gpe1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpf0: gpf0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpf1: gpf1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpk0: gpk0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpx0: gpx0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpx1: gpx1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpx2: gpx2 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpx3: gpx3 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       uart0_data: uart0-data {
+               samsung,pins = "gpa0-0", "gpa0-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       uart0_fctl: uart0-fctl {
+               samsung,pins = "gpa0-2", "gpa0-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       uart1_data: uart1-data {
+               samsung,pins = "gpa1-0", "gpa1-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       uart1_fctl: uart1-fctl {
+               samsung,pins = "gpa1-2", "gpa1-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       uart2_data: uart2-data {
+               samsung,pins = "gpa1-4", "gpa1-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       spi0_bus: spi0-bus {
+               samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       spi1_bus: spi1-bus {
+               samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       usb3_vbus0_en: usb3-vbus0-en {
+               samsung,pins = "gpa2-4";
+               samsung,pin-function = <1>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2s1_bus: i2s1-bus {
+               samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+                               "gpb0-4";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       pcm1_bus: pcm1-bus {
+               samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+                               "gpb0-4";
+               samsung,pin-function = <3>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       spdif1_bus: spdif1-bus {
+               samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+               samsung,pin-function = <4>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       spi2_bus: spi2-bus {
+               samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c0_hs_bus: i2c0-hs-bus {
+               samsung,pins = "gpb3-0", "gpb3-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c1_hs_bus: i2c1-hs-bus {
+               samsung,pins = "gpb3-2", "gpb3-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c2_hs_bus: i2c2-hs-bus {
+               samsung,pins = "gpb3-4", "gpb3-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c3_hs_bus: i2c3-hs-bus {
+               samsung,pins = "gpb3-6", "gpb3-7";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c4_bus: i2c4-bus {
+               samsung,pins = "gpb4-0", "gpb4-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c5_bus: i2c5-bus {
+               samsung,pins = "gpb4-2", "gpb4-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c6_bus: i2c6-bus {
+               samsung,pins = "gpb4-4", "gpb4-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c7_bus: i2c7-bus {
+               samsung,pins = "gpb4-6", "gpb4-7";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c8_bus: i2c8-bus {
+               samsung,pins = "gpb5-0", "gpb5-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c9_bus: i2c9-bus {
+               samsung,pins = "gpb5-2", "gpb5-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c10_bus: i2c10-bus {
+               samsung,pins = "gpb5-4", "gpb5-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       i2c11_bus: i2c11-bus {
+               samsung,pins = "gpb5-6", "gpb5-7";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_gpio_a: cam-gpio-a {
+               samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+                       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+                       "gpe1-0", "gpe1-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_gpio_b: cam-gpio-b {
+               samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+                       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+               samsung,pin-function = <3>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_i2c1_bus: cam-i2c1-bus {
+               samsung,pins = "gpf0-2", "gpf0-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_i2c0_bus: cam-i2c0-bus {
+               samsung,pins = "gpf0-0", "gpf0-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_spi0_bus: cam-spi0-bus {
+               samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+
+       cam_spi1_bus: cam-spi1-bus {
+               samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <0>;
+       };
+};
+
+&pinctrl_1 {
+       gpc0: gpc0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpc1: gpc1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpc2: gpc2 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpc3: gpc3 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpc4: gpc4 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       sd0_clk: sd0-clk {
+               samsung,pins = "gpc0-0";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd0_cmd: sd0-cmd {
+               samsung,pins = "gpc0-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd0_bus1: sd0-bus-width1 {
+               samsung,pins = "gpc0-2";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd0_bus4: sd0-bus-width4 {
+               samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd0_bus8: sd0-bus-width8 {
+               samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd0_rdqs: sd0-rdqs {
+               samsung,pins = "gpc0-6";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd1_clk: sd1-clk {
+               samsung,pins = "gpc1-0";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd1_cmd: sd1-cmd {
+               samsung,pins = "gpc1-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd1_bus1: sd1-bus-width1 {
+               samsung,pins = "gpc1-2";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd1_bus4: sd1-bus-width4 {
+               samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd1_bus8: sd1-bus-width8 {
+               samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd2_clk: sd2-clk {
+               samsung,pins = "gpc2-0";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd2_cmd: sd2-cmd {
+               samsung,pins = "gpc2-1";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_NONE>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd2_cd: sd2-cd {
+               samsung,pins = "gpc2-2";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd2_bus1: sd2-bus-width1 {
+               samsung,pins = "gpc2-3";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+
+       sd2_bus4: sd2-bus-width4 {
+               samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+               samsung,pin-function = <2>;
+               samsung,pin-pud = <PIN_PULL_UP>;
+               samsung,pin-drv = <3>;
+       };
+};
+
+&pinctrl_2 {
+       gpz0: gpz0 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
+       gpz1: gpz1 {
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi 
b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 0000000..a99ef77
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,400 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+/ {
+       compatible = "samsung,exynos5260";
+       interrupt-parent = <&gic>;
+
+       aliases {
+               pinctrl0 = &pinctrl_0;
+               pinctrl1 = &pinctrl_1;
+               pinctrl2 = &pinctrl_2;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a15";
+                       reg = <0x0>;
+                       cci-control-port = <&cci_control1>;
+               };
+
+               cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a15";
+                       reg = <0x1>;
+                       cci-control-port = <&cci_control1>;
+               };
+
+               cpu@100 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x100>;
+                       cci-control-port = <&cci_control0>;
+               };
+
+               cpu@101 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x101>;
+                       cci-control-port = <&cci_control0>;
+               };
+
+               cpu@102 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x102>;
+                       cci-control-port = <&cci_control0>;
+               };
+
+               cpu@103 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x103>;
+                       cci-control-port = <&cci_control0>;
+               };
+       };
+
+       soc: soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               clock_top: clock-controller@10010000 {
+                       compatible = "samsung,exynos5260-clock-top";
+                       reg = <0x10010000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_peri: clock-controller@10200000 {
+                       compatible = "samsung,exynos5260-clock-peri";
+                       reg = <0x10200000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_egl: clock-controller@10600000 {
+                       compatible = "samsung,exynos5260-clock-egl";
+                       reg = <0x10600000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_kfc: clock-controller@10700000 {
+                       compatible = "samsung,exynos5260-clock-kfc";
+                       reg = <0x10700000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_g2d: clock-controller@10A00000 {
+                       compatible = "samsung,exynos5260-clock-g2d";
+                       reg = <0x10A00000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_mif: clock-controller@10CE0000 {
+                       compatible = "samsung,exynos5260-clock-mif";
+                       reg = <0x10CE0000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_mfc: clock-controller@11090000 {
+                       compatible = "samsung,exynos5260-clock-mfc";
+                       reg = <0x11090000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_g3d: clock-controller@11830000 {
+                       compatible = "samsung,exynos5260-clock-g3d";
+                       reg = <0x11830000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_fsys: clock-controller@122E0000 {
+                       compatible = "samsung,exynos5260-clock-fsys";
+                       reg = <0x122E0000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_aud: clock-controller@128C0000 {
+                       compatible = "samsung,exynos5260-clock-aud";
+                       reg = <0x128C0000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_isp: clock-controller@133C0000 {
+                       compatible = "samsung,exynos5260-clock-isp";
+                       reg = <0x133C0000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_gscl: clock-controller@13F00000 {
+                       compatible = "samsung,exynos5260-clock-gscl";
+                       reg = <0x13F00000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clock_disp: clock-controller@14550000 {
+                       compatible = "samsung,exynos5260-clock-disp";
+                       reg = <0x14550000 0x10000>;
+                       #clock-cells = <1>;
+               };
+
+               clocks {
+                       compatible = "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <0>;

Even though you added #address-cells property I can not see "reg" property in any of "fixed-clock".
Isn't it better either we can remove this or add "reg" property?
Also all these fixed-clock are missing #clock-cells property.
+
+                       dptx_phy_ch0: phyclk_dptx_phy_ch0_txd {
+                               compatible = "fixed-clock";
+                               clock-frequency = <270000000>;
+                               clock-output-names = 
"phyclk_dptx_phy_ch0_txd_clk";
+                       };
+
+                       dptx_phy_ch1: phyclk_dptx_phy_ch1_txd {
+                               compatible = "fixed-clock";
+                               clock-frequency = <270000000>;
+                               clock-output-names = 
"phyclk_dptx_phy_ch1_txd_clk";
+                       };
+
+                       dptx_phy_ch2: phyclk_dptx_phy_ch2_txd {
+                               compatible = "fixed-clock";
+                               clock-frequency = <270000000>;
+                               clock-output-names = 
"phyclk_dptx_phy_ch2_txd_clk";
+                       };
+
+                       dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk {
+                               compatible = "fixed-clock";
+                               clock-frequency = <270000000>;
+                               clock-output-names = 
"phyclk_dptx_phy_ch3_txd_clk";
+                       };
+
+                       hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko {
+                               compatible = "fixed-clock";
+                               clock-frequency = <250000000>;
+                               clock-output-names = 
"phyclk_hdmi_phy_tmds_clko";
+                       };
+
+                       hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko {
+                               compatible = "fixed-clock";
+                               clock-frequency = <166000000>;
+                               clock-output-names = 
"phyclk_hdmi_phy_pixel_clko";
+                       };
+
+                       hdmi_link_tmds_clkhi: phyclk_hdmi_link_o_tmds_clkhi {
+                               compatible = "fixed-clock";
+                               clock-frequency = <125000000>;
+                               clock-output-names = 
"phyclk_hdmi_link_o_tmds_clkhi";
+                       };
+
+                       dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m {
+                               compatible = "fixed-clock";
+                               clock-frequency = <24000000>;
+                               clock-output-names = 
"phyclk_dptx_phy_o_ref_clk_24m";
+                       };
+
+                       dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 {
+                               compatible = "fixed-clock";
+                               clock-frequency = <135000000>;
+                               clock-output-names = "phyclk_dptx_phy_clk_div2";
+                       };
+
+                       mipi_dphy_rxclkesc0: phyclk_mipi_dphy_4l_m_rxclkesc0 {
+                               compatible = "fixed-clock";
+                               clock-frequency = <20000000>;
+                               clock-output-names = 
"phyclk_mipi_dphy_4l_m_rxclkesc0";
+                       };
+
+                       usbhost20_phy_phyclock: phyclk_usbhost20_phy_phyclock {
+                               compatible = "fixed-clock";
+                               clock-frequency = <60000000>;
+                               clock-output-names = 
"phyclk_usbhost20_phy_phyclock";
+                       };
+
+                       usbhost20_phy_freeclk: phyclk_usbhost20_phy_freeclk {
+                               compatible = "fixed-clock";
+                               clock-frequency = <60000000>;
+                               clock-output-names = 
"phyclk_usbhost20_phy_freeclk";
+                       };
+
+                       usbhost20_phy_clk48mohci: 
phyclk_usbhost20_phy_clk48mohci {
+                               compatible = "fixed-clock";
+                               clock-frequency = <48000000>;
+                               clock-output-names = 
"phyclk_usbhost20_phy_clk48mohci";
+                       };
+
+                       usbdrd30_pipe_pclk: phyclk_usbdrd30_udrd30_pipe_pclk {
+                               compatible = "fixed-clock";
+                               clock-frequency = <125000000>;
+                               clock-output-names = 
"phyclk_usbdrd30_udrd30_pipe_pclk";
+                       };
+
+                       usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock {
+                               compatible = "fixed-clock";
+                               clock-frequency = <60000000>;
+                               clock-output-names = 
"phyclk_usbdrd30_udrd30_phyclock";
+                       };
+               };
+
+               gic: interrupt-controller@10481000 {
+                       compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-controller;
+                       reg = <0x10481000 0x1000>,
+                               <0x10482000 0x1000>,
+                               <0x10484000 0x2000>,
+                               <0x10486000 0x2000>;
+                       interrupts = <1 9 0xf04>;
+               };
+
+               chipid: chipid@10000000 {
+                       compatible = "samsung,exynos4210-chipid";
+                       reg = <0x10000000 0x100>;
+               };
+
+               mct: mct@100B0000 {
+                       compatible = "samsung,exynos4210-mct";
+                       reg = <0x100B0000 0x1000>;
+                       clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+                       clock-names = "fin_pll", "mct";
+                       interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+                                       <0 107 0>, <0 122 0>, <0 123 0>,
+                                       <0 124 0>, <0 125 0>, <0 126 0>,
+                                       <0 127 0>, <0 128 0>, <0 129 0>;
+               };
+
+               cci: cci@10F00000 {
+                       compatible = "arm,cci-400";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x10F00000 0x1000>;
+                       ranges = <0x0 0x10F00000 0x6000>;
+
+                       cci_control0: slave-if@4000 {
+                               compatible = "arm,cci-400-ctrl-if";
+                               interface-type = "ace";
+                               reg = <0x4000 0x1000>;
+                       };
+
+                       cci_control1: slave-if@5000 {
+                               compatible = "arm,cci-400-ctrl-if";
+                               interface-type = "ace";
+                               reg = <0x5000 0x1000>;
+                       };
+               };
+
+               pinctrl_0: pinctrl@11600000 {
+                       compatible = "samsung,exynos5260-pinctrl";
+                       reg = <0x11600000 0x1000>;
+                       interrupts = <0 79 0>;
+
+                       wakeup-interrupt-controller {
+                               compatible = "samsung,exynos4210-wakeup-eint";
+                               interrupt-parent = <&gic>;
+                               interrupts = <0 32 0>;
+                       };
+               };
+
+               pinctrl_1: pinctrl@12290000 {
+                       compatible = "samsung,exynos5260-pinctrl";
+                       reg = <0x12290000 0x1000>;
+                       interrupts = <0 157 0>;
+               };
+
+               pinctrl_2: pinctrl@128B0000 {
+                       compatible = "samsung,exynos5260-pinctrl";
+                       reg = <0x128B0000 0x1000>;
+                       interrupts = <0 243 0>;
+               };
+
+               uart0: serial@12C00000 {
+                       compatible = "samsung,exynos4210-uart";
+                       reg = <0x12C00000 0x100>;
+                       interrupts = <0 146 0>;
+                       clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri 
PERI_SCLK_UART0>;
+                       clock-names = "uart", "clk_uart_baud0";
+                       status = "disabled";
+               };
+
+               uart1: serial@12C10000 {
+                       compatible = "samsung,exynos4210-uart";
+                       reg = <0x12C10000 0x100>;
+                       interrupts = <0 147 0>;
+                       clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri 
PERI_SCLK_UART1>;
+                       clock-names = "uart", "clk_uart_baud0";
+                       status = "disabled";
+               };
+
+               uart2: serial@12C20000 {
+                       compatible = "samsung,exynos4210-uart";
+                       reg = <0x12C20000 0x100>;
+                       interrupts = <0 148 0>;
+                       clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri 
PERI_SCLK_UART2>;
+                       clock-names = "uart", "clk_uart_baud0";
+                       status = "disabled";
+               };
+
+               uart3: serial@12860000 {
+                       compatible = "samsung,exynos4210-uart";
+                       reg = <0x12860000 0x100>;
+                       interrupts = <0 145 0>;
+                       clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud 
AUD_SCLK_AUD_UART>;
+                       clock-names = "uart", "clk_uart_baud0";
+                       status = "disabled";
+               };
+
+               mmc_0: mmc0@12140000 {
+                       compatible = "samsung,exynos5250-dw-mshc";
+                       reg = <0x12140000 0x2000>;
+                       interrupts = <0 156 0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top 
TOP_SCLK_MMC0>;
+                       clock-names = "biu", "ciu";
+                       fifo-depth = <64>;
+                       status = "disabled";
+               };
+
+               mmc_1: mmc1@12150000 {
+                       compatible = "samsung,exynos5250-dw-mshc";
+                       reg = <0x12150000 0x2000>;
+                       interrupts = <0 158 0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top 
TOP_SCLK_MMC1>;
+                       clock-names = "biu", "ciu";
+                       fifo-depth = <64>;
+                       status = "disabled";
+               };
+
+               mmc_2: mmc2@12160000 {
+                       compatible = "samsung,exynos5250-dw-mshc";
+                       reg = <0x12160000 0x2000>;
+                       interrupts = <0 159 0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top 
TOP_SCLK_MMC2>;
+                       clock-names = "biu", "ciu";
+                       fifo-depth = <64>;
+                       status = "disabled";
+               };
+       };
+};
+
+#include "exynos5260-pinctrl.dtsi"


--
Best Regards,
Pankaj Dubey

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to