In (efe2f29 kgdboc,kdb: Allow kdb to work on a non open console port)
support was added to directly use the "write_char" functions when
doing kdb over a non-open console port. This is great, but it ends up
bypassing the normal code in uart_console_write() that adds a carriage
return before any newlines.
There appears to have been a trend to add this support directly in
some console driver's poll_put_char() functions. This had a few side
effects, including:
- In this case we were doing LFCR, not CRLF. This was fixed in
uart_console_write() back in (d358788 [SERIAL] kernel console should
send CRLF not LFCR)
- Not all serial drivers had the LFCR code in their poll_put_char()
functions. In my case I was running serial/samsung.c which lacked
it.
I've moved the handling to uart_poll_put_char() to fix the above
problems. Now when I use kdb (and don't point console= to the same
UART) I no longer get:
[0]kdb>
[0]kdb>
[0]kdb>
Signed-off-by: Doug Anderson <diand...@chromium.org>
---
Changes in v2:
- Moved from kdb to serial_core
drivers/tty/serial/8250/8250_core.c | 5 -----
drivers/tty/serial/pch_uart.c | 5 -----
drivers/tty/serial/pxa.c | 5 -----
drivers/tty/serial/serial_core.c | 3 +++
drivers/tty/serial/serial_txx9.c | 5 -----
5 files changed, 3 insertions(+), 20 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c
b/drivers/tty/serial/8250/8250_core.c
index 81f909c..ffee982 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port
*port,
wait_for_xmitr(up, BOTH_EMPTY);
/*
* Send the character out.
- * If a LF, also do CR...
*/
serial_port_out(port, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_TX, 13);
- }
/*
* Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0931b3f..11e631d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1588,13 +1588,8 @@ static void pch_uart_put_poll_char(struct uart_port
*port,
wait_for_xmitr(priv, UART_LSR_THRE);
/*
* Send the character out.
- * If a LF, also do CR...
*/
iowrite8(c, priv->membase + PCH_UART_THR);
- if (c == 10) {
- wait_for_xmitr(priv, UART_LSR_THRE);
- iowrite8(13, priv->membase + PCH_UART_THR);
- }
/*
* Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index f9f20f3..9e7ee39 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -711,13 +711,8 @@ static void serial_pxa_put_poll_char(struct uart_port
*port,
wait_for_xmitr(up);
/*
* Send the character out.
- * If a LF, also do CR...
*/
serial_out(up, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up);
- serial_out(up, UART_TX, 13);
- }
/*
* Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f26834d..5dba976 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2236,6 +2236,9 @@ static void uart_poll_put_char(struct tty_driver *driver,
int line, char ch)
return;
port = state->uart_port;
+
+ if (ch == '\n')
+ port->ops->poll_put_char(port, '\r');
port->ops->poll_put_char(port, ch);
}
#endif
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 90a080b..60f49b9 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -535,13 +535,8 @@ static void serial_txx9_put_poll_char(struct uart_port
*port, unsigned char c)
wait_for_xmitr(up);
/*
* Send the character out.
- * If a LF, also do CR...
*/
sio_out(up, TXX9_SITFIFO, c);
- if (c == 10) {
- wait_for_xmitr(up);
- sio_out(up, TXX9_SITFIFO, 13);
- }
/*
* Finally, wait for transmitter to become empty
--
1.9.1.423.g4596e3a
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
