There is no need for abstracting configuration for registers that are identical on all SoC types.
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com> --- drivers/thermal/samsung/exynos_tmu.c | 12 ++++++------ drivers/thermal/samsung/exynos_tmu.h | 11 ----------- drivers/thermal/samsung/exynos_tmu_data.c | 15 --------------- 3 files changed, 6 insertions(+), 32 deletions(-) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 45d7c6f..d37e755 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -215,11 +215,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) if (pdata->test_mux) con |= (pdata->test_mux << reg->test_mux_addr_shift); - con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); - con |= pdata->reference_voltage << reg->buf_vref_sel_shift; + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; - con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); - con |= (pdata->gain << reg->buf_slope_sel_shift); + con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); + con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); if (pdata->noise_cancel_mode) { con &= ~(reg->therm_trip_mode_mask << @@ -228,7 +228,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) } if (on) { - con |= (1 << reg->core_en_shift); + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = pdata->trigger_enable[3] << reg->inten_rise3_shift | pdata->trigger_enable[2] << reg->inten_rise2_shift | @@ -238,7 +238,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) interrupt_en |= interrupt_en << reg->inten_fall0_shift; } else { - con &= ~(1 << reg->core_en_shift); + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ } writel(interrupt_en, data->base + reg->tmu_inten); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 4845171..5c25a4b 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -69,15 +69,9 @@ enum soc_type { * @triminfo_ctrl: trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. - * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. - * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl - register. - * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. * @threshold_temp: register containing the base threshold level. @@ -111,14 +105,9 @@ struct exynos_tmu_registers { u32 tmu_ctrl; u32 test_mux_addr_shift; - u32 buf_vref_sel_shift; - u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; u32 therm_trip_mode_mask; u32 therm_trip_en_shift; - u32 buf_slope_sel_shift; - u32 buf_slope_sel_mask; - u32 core_en_shift; u32 tmu_status; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index ef7f186..32530dc 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -28,11 +28,6 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP, @@ -92,14 +87,9 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -188,14 +178,9 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { static const struct exynos_tmu_registers exynos5440_tmu_registers = { .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html