On 04/27/2014 03:50 AM, YoungJun Cho wrote:
> The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
> from the one in Exynos4 SoC.
>
> In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
> and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
> So this patch adds driver data to distinguish it.
>
> Changelog v2:
> - Moves exynos_dsi_enable_clocks() after exynos_dsi_reset()
> (commented by Andrzej Hajda)
> - Splits D-PHY control setting routines from PLL setting one
> (commented by Andrzej Hajda)
>
> Signed-off-by: YoungJun Cho <yj44....@samsung.com>
> Acked-by: Inki Dae <inki....@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 154
> ++++++++++++++++++++++++++-----
> 1 file changed, 132 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 4a918ec..c18dba3 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -17,6 +17,7 @@
>
> #include <linux/clk.h>
> #include <linux/irq.h>
> +#include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/regulator/consumer.h>
>
> @@ -54,9 +55,12 @@
>
> /* FIFO memory AC characteristic register */
> #define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
> -#define DSIM_PLLTMR_REG 0x50 /* PLL timer register */
> #define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
> #define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
> +#define DSIM_PHYCTRL_REG 0x5c
> +#define DSIM_PHYTIMING_REG 0x64
> +#define DSIM_PHYTIMING1_REG 0x68
> +#define DSIM_PHYTIMING2_REG 0x6c
>
> /* DSIM_STATUS */
> #define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
> @@ -200,6 +204,21 @@
> #define DSIM_PLL_M(x) ((x) << 4)
> #define DSIM_PLL_S(x) ((x) << 1)
>
> +/* DSIM_PHYTIMING */
> +#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
> +#define DSIM_PHYTIMING_HS_EXIT(x) ((x) << 0)
> +
> +/* DSIM_PHYTIMING1 */
> +#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
> +#define DSIM_PHYTIMING1_CLK_ZERO(x) ((x) << 16)
> +#define DSIM_PHYTIMING1_CLK_POST(x) ((x) << 8)
> +#define DSIM_PHYTIMING1_CLK_TRAIL(x) ((x) << 0)
> +
> +/* DSIM_PHYTIMING2 */
> +#define DSIM_PHYTIMING2_HS_PREPARE(x) ((x) << 16)
> +#define DSIM_PHYTIMING2_HS_ZERO(x) ((x) << 8)
> +#define DSIM_PHYTIMING2_HS_TRAIL(x) ((x) << 0)
> +
> #define DSI_MAX_BUS_WIDTH 4
> #define DSI_NUM_VIRTUAL_CHANNELS 4
> #define DSI_TX_FIFO_SIZE 2048
> @@ -233,6 +252,12 @@ struct exynos_dsi_transfer {
> #define DSIM_STATE_INITIALIZED BIT(1)
> #define DSIM_STATE_CMD_LPM BIT(2)
>
> +struct exynos_dsi_driver_data {
> + unsigned int plltmr_reg;
> +
> + unsigned int has_freqband:1;
> +};
> +
> struct exynos_dsi {
> struct mipi_dsi_host dsi_host;
> struct drm_connector connector;
> @@ -262,11 +287,39 @@ struct exynos_dsi {
>
> spinlock_t transfer_lock; /* protects transfer_list */
> struct list_head transfer_list;
> +
> + struct exynos_dsi_driver_data *driver_data;
> };
>
> #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
> #define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
>
> +static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
> + .plltmr_reg = 0x50,
> + .has_freqband = 1,
> +};
> +
> +static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
> + .plltmr_reg = 0x58,
> +};
> +
> +static struct of_device_id exynos_dsi_of_match[] = {
> + { .compatible = "samsung,exynos4210-mipi-dsi",
> + .data = &exynos4_dsi_driver_data },
> + { .compatible = "samsung,exynos5420-mipi-dsi",
> + .data = &exynos5_dsi_driver_data },
> + { }
> +};
I raise again issue of compatible string.
Since exynos5410 DSIM contains DSIM_VERSION register, it is better
to use this register instead of compatible string to distinguish
device versions. So as a compatible we should use the first exynos
chipset containing this field. AFAIK it is exynos5410.
So the only thing you should do is to change compatible string from
samsung,exynos5420-mipi-dsi to samsung,exynos5410-mipi-dsi.
>
> I posted RFC v3 without this try.
>
> Because there is no exynos5410 relevant DTS yet,
> and making exynos5410 DTS is out of scope for this RFC.
It is irrelevant.
Regards
Andrzej
> +
> +static inline struct exynos_dsi_driver_data *exynos_dsi_get_driver_data(
> + struct platform_device *pdev)
> +{
> + const struct of_device_id *of_id =
> + of_match_device(exynos_dsi_of_match, &pdev->dev);
> +
> + return (struct exynos_dsi_driver_data *)of_id->data;
> +}
> +
> static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
> {
> if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
> @@ -340,14 +393,9 @@ static unsigned long exynos_dsi_pll_find_pms(struct
> exynos_dsi *dsi,
> static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
> unsigned long freq)
> {
> - static const unsigned long freq_bands[] = {
> - 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
> - 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
> - 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
> - 770 * MHZ, 870 * MHZ, 950 * MHZ,
> - };
> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
> unsigned long fin, fout;
> - int timeout, band;
> + int timeout;
> u8 p, s;
> u16 m;
> u32 reg;
> @@ -368,18 +416,30 @@ static unsigned long exynos_dsi_set_pll(struct
> exynos_dsi *dsi,
> "failed to find PLL PMS for requested frequency\n");
> return -EFAULT;
> }
> + dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
>
> - for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
> - if (fout < freq_bands[band])
> - break;
> + writel(500, dsi->reg_base + driver_data->plltmr_reg);
> +
> + reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
> +
> + if (driver_data->has_freqband) {
> + static const unsigned long freq_bands[] = {
> + 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
> + 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
> + 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
> + 770 * MHZ, 870 * MHZ, 950 * MHZ,
> + };
> + int band;
> +
> + for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
> + if (fout < freq_bands[band])
> + break;
>
> - dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d), band %d\n", fout,
> - p, m, s, band);
> + dev_dbg(dsi->dev, "band %d\n", band);
>
> - writel(500, dsi->reg_base + DSIM_PLLTMR_REG);
> + reg |= DSIM_FREQ_BAND(band);
> + }
>
> - reg = DSIM_FREQ_BAND(band) | DSIM_PLL_EN
> - | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
> writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
>
> timeout = 1000;
> @@ -433,6 +493,59 @@ static int exynos_dsi_enable_clock(struct exynos_dsi
> *dsi)
> return 0;
> }
>
> +static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
> +{
> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
> + u32 reg;
> +
> + if (driver_data->has_freqband)
> + return;
> +
> + /* B D-PHY */
> + reg = 0x0af & 0x1ff;
> + writel(reg, dsi->reg_base + DSIM_PHYCTRL_REG);
> +
> + /*
> + * T LPX: Transmitted length of any Low-Power state period
> + * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
> + * burst
> + */
> + reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING_REG);
> +
> + /*
> + * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
> + * Line state immediately before the HS-0 Line state starting the
> + * HS transmission
> + * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
> + * transmitting the Clock.
> + * T CLK_POST: Time that the transmitter continues to send HS clock
> + * after the last associated Data Lane has transitioned to LP Mode
> + * Interval is defined as the period from the end of T HS-TRAIL to
> + * the beginning of T CLK-TRAIL
> + * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
> + * the last payload clock bit of a HS transmission burst
> + */
> + reg = DSIM_PHYTIMING1_CLK_PREPARE(0x07) |
> + DSIM_PHYTIMING1_CLK_ZERO(0x27) |
> + DSIM_PHYTIMING1_CLK_POST(0x0d) |
> + DSIM_PHYTIMING1_CLK_TRAIL(0x08);
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING1_REG);
> +
> + /*
> + * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
> + * Line state immediately before the HS-0 Line state starting the
> + * HS transmission
> + * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
> + * transmitting the Sync sequence.
> + * T HS-TRAIL: Time that the transmitter drives the flipped differential
> + * state after last payload data bit of a HS transmission burst
> + */
> + reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
> + DSIM_PHYTIMING2_HS_TRAIL(0x0b);
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING2_REG);
> +}
> +
> static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
> {
> u32 reg;
> @@ -947,10 +1060,11 @@ static irqreturn_t exynos_dsi_irq(int irq, void
> *dev_id)
>
> static int exynos_dsi_init(struct exynos_dsi *dsi)
> {
> - exynos_dsi_enable_clock(dsi);
> exynos_dsi_reset(dsi);
> enable_irq(dsi->irq);
> + exynos_dsi_enable_clock(dsi);
> exynos_dsi_wait_for_reset(dsi);
> + exynos_dsi_set_phy_ctrl(dsi);
> exynos_dsi_init_link(dsi);
>
> return 0;
> @@ -1412,6 +1526,7 @@ static int exynos_dsi_probe(struct platform_device
> *pdev)
> dsi->dsi_host.dev = &pdev->dev;
>
> dsi->dev = &pdev->dev;
> + dsi->driver_data = exynos_dsi_get_driver_data(pdev);
>
> ret = exynos_dsi_parse_dt(dsi);
> if (ret)
> @@ -1516,11 +1631,6 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume)
> };
>
> -static struct of_device_id exynos_dsi_of_match[] = {
> - { .compatible = "samsung,exynos4210-mipi-dsi" },
> - { }
> -};
> -
> struct platform_driver dsi_driver = {
> .probe = exynos_dsi_probe,
> .remove = exynos_dsi_remove,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
