On Mon, May 5, 2014 at 12:52 PM, Ajay Kumar <ajaykumar...@samsung.com> wrote:
> modify the driver to call the bridge->funcs of the next bridge
> in the chain.
> We assume that the bridge sitting next to ptn3460 is a bridge-panel.
>
> Signed-off-by: Ajay Kumar <ajaykumar...@samsung.com>
> ---
> drivers/gpu/drm/bridge/ptn3460.c | 21 +++++++++++++++++----
> 1 file changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ptn3460.c
> b/drivers/gpu/drm/bridge/ptn3460.c
> index b171901..969869a 100644
> --- a/drivers/gpu/drm/bridge/ptn3460.c
> +++ b/drivers/gpu/drm/bridge/ptn3460.c
> @@ -126,6 +126,8 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
> gpio_set_value(ptn_bridge->gpio_rst_n, 1);
> }
>
> + if (bridge->next_bridge)
> + bridge->next_bridge->funcs->pre_enable(bridge->next_bridge);
> /*
> * There's a bug in the PTN chip where it falsely asserts hotplug
> before
> * it is fully functional. We're forced to wait for the maximum start
> up
> @@ -142,6 +144,8 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>
> static void ptn3460_enable(struct drm_bridge *bridge)
> {
> + if (bridge->next_bridge)
> + bridge->next_bridge->funcs->enable(bridge->next_bridge);
> }
>
> static void ptn3460_disable(struct drm_bridge *bridge)
> @@ -153,6 +157,11 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>
> ptn_bridge->enabled = false;
>
> + if (bridge->next_bridge) {
> + bridge->next_bridge->funcs->disable(bridge->next_bridge);
> + bridge->next_bridge->funcs->post_disable(bridge->next_bridge);
Shouldn't post_disable be called from ptn_3460_post_disable, instead of here?
> + }
> +
> if (gpio_is_valid(ptn_bridge->gpio_rst_n))
> gpio_set_value(ptn_bridge->gpio_rst_n, 1);
>
> @@ -197,7 +206,10 @@ int ptn3460_get_modes(struct drm_connector *connector)
> return drm_add_edid_modes(connector, ptn_bridge->edid);
>
> power_off = !ptn_bridge->enabled;
> - ptn3460_pre_enable(ptn_bridge->bridge);
> + if (power_off) {
> + ptn3460_pre_enable(ptn_bridge->bridge);
> + ptn3460_enable(ptn_bridge->bridge);
In this case, I don't think we need to power on the entire bridge
chain since we're just reading the edid from the bridge chip itself.
So I think I'd prefer to break out the power_on/power_off code from
the bridge chain such that we can just power up the bridge chip, check
the edid and then turn it off.
In other bridges, where we're actually reading the edid from a
downstream source, this decision might be different.
> + }
>
> edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
> if (!edid) {
> @@ -219,8 +231,10 @@ int ptn3460_get_modes(struct drm_connector *connector)
> num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
>
> out:
> - if (power_off)
> + if (power_off) {
> ptn3460_disable(ptn_bridge->bridge);
> + ptn3460_post_disable(ptn_bridge->bridge);
> + }
>
> return num_modes;
> }
> @@ -318,14 +332,13 @@ int ptn3460_init(struct drm_device *dev, struct
> drm_encoder *encoder,
> goto err;
> }
>
> - ret = drm_bridge_init(dev, bridge, &ptn3460_bridge_funcs);
> + ret = drm_bridge_init(dev, bridge, encoder, &ptn3460_bridge_funcs);
> if (ret) {
> DRM_ERROR("Failed to initialize bridge with drm\n");
> goto err;
> }
>
> bridge->driver_private = ptn_bridge;
> - encoder->bridge = bridge;
>
> ret = drm_connector_init(dev, &ptn_bridge->connector,
> &ptn3460_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
> --
> 1.8.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
