From: Thomas Abraham <thomas...@samsung.com>
The CPU clock provider supplies the clock to the CPU clock domain. The
composition and organization of the CPU clock provider could vary among
Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers
and gates. This patch defines a new clock type for CPU clock provider and
adds infrastructure to register the CPU clock providers for Samsung
platforms.
Cc: Tomasz Figa <t.f...@samsung.com>
Signed-off-by: Thomas Abraham <thomas...@samsung.com>
---
drivers/clk/samsung/Makefile | 2 +-
drivers/clk/samsung/clk-cpu.c | 458 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/samsung/clk.h | 5 +
3 files changed, 464 insertions(+), 1 deletions(-)
create mode 100644 drivers/clk/samsung/clk-cpu.c
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 8eb4799..e2b453f 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -2,7 +2,7 @@
# Samsung Clock specific Makefile
#
-obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o clk-cpu.o
obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
new file mode 100644
index 0000000..6a40862
--- /dev/null
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -0,0 +1,458 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas...@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the utility functions to register the cpu clocks
+ * for samsung platforms.
+*/
+
+#include <linux/errno.h>
+#include "clk.h"
+
+#define SRC_CPU 0x0
+#define STAT_CPU 0x200
+#define DIV_CPU0 0x300
+#define DIV_CPU1 0x304
+#define DIV_STAT_CPU0 0x400
+#define DIV_STAT_CPU1 0x404
+
+#define MAX_DIV 8
+
+#define EXYNOS4210_ARM_DIV1(div) ((div & 0x7) + 1)
+#define EXYNOS4210_ARM_DIV2(div) (((div >> 28) & 0x7) + 1)
+
+#define EXYNOS4210_DIV_CPU0(d5, d4, d3, d2, d1, d0) \
+ ((d5 << 24) | (d4 << 20) | (d3 << 16) | (d2 << 12) | \
+ (d1 << 8) | (d0 << 4))
+#define EXYNOS4210_DIV_CPU1(d2, d1, d0)
\
+ ((d2 << 8) | (d1 << 4) | (d0 << 0))
+
+#define EXYNOS4210_DIV1_HPM_MASK ((0x7 << 0) | (0x7 << 4))
+#define EXYNOS4210_MUX_HPM_MASK (1 << 20)
+
+/**
+ * struct exynos4210_armclk_data: config data to setup exynos4210 cpu clocks.
+ * @prate: frequency of the parent clock.
+ * @div0: value to be programmed in the div_cpu0 register.
+ * @div1: value to be programmed in the div_cpu1 register.
+ *
+ * This structure holds the divider configuration data for divider clocks
+ * belonging to the CMU_CPU clock domain. The parent frequency at which these
+ * divider values are vaild is specified in @prate.
+ */
+struct exynos4210_armclk_data {
+ unsigned long prate;
+ unsigned int div0;
+ unsigned int div1;
+};
+
+/**
+ * struct exynos_cpuclk: information about clock supplied to a CPU core.
+ * @hw: handle between ccf and cpu clock.
+ * @alt_parent: alternate parent clock to use when switching the speed
+ * of the primary parent clock.
+ * @ctrl_base: base address of the clock controller.
+ * @offset: offset from the ctrl_base address where the cpu clock div/mux
+ * registers can be accessed.
+ * @clk_nb: clock notifier registered for changes in clock speed of the
+ * primary parent clock.
+ * @lock: register access lock.
+ * @data: optional data which the acutal instantiation of this clock
+ * can use.
+ */
+struct exynos_cpuclk {
+ struct clk_hw hw;
+ struct clk *alt_parent;
+ void __iomem *ctrl_base;
+ unsigned long offset;
+ struct notifier_block clk_nb;
+ spinlock_t *lock;
+ void *data;
+};
+
+#define to_exynos_cpuclk_hw(hw) container_of(hw, struct exynos_cpuclk, hw)
+#define to_exynos_cpuclk_nb(nb) container_of(nb, struct exynos_cpuclk, clk_nb)
+
+/**
+ * struct exynos_cpuclk_soc_data: soc specific data for cpu clocks.
+ * @parser: pointer to a function that can parse SoC specific data.
+ * @ops: clock operations to be used for this clock.
+ * @offset: optional offset from base of clock controller register base, to
+ * be used when accessing clock controller registers related to the
+ * cpu clock.
+ * @clk_cb: the clock notifier callback to be called for changes in the
+ * clock rate of the primary parent clock.
+ *
+ * This structure provides SoC specific data for ARM clocks. Based on
+ * the compatible value of the clock controller node, the value of the
+ * fields in this structure can be populated.
+ */
+struct exynos_cpuclk_soc_data {
+ int (*parser)(struct device_node *, void **);
+ const struct clk_ops *ops;
+ unsigned int offset;
+ int (*clk_cb)(struct notifier_block *nb, unsigned long evt, void *data);
+};
+
+/* common round rate callback useable for all types of cpu clocks */
+static long exynos_cpuclk_round_rate(struct clk_hw *hw,
+ unsigned long drate, unsigned long *prate)
+{
+ struct clk *parent = __clk_get_parent(hw->clk);
+ unsigned long max_prate = __clk_round_rate(parent, UINT_MAX);
+ unsigned long t_prate, div = 1, best_div = 1;
+ unsigned long delta, min_delta = UINT_MAX;
+
+ do {
+ t_prate = __clk_round_rate(parent, drate * div);
+ delta = drate - (t_prate / div);
+ if (delta < min_delta) {
+ *prate = t_prate;
+ best_div = div;
+ min_delta = delta;
+ }
+ if (!delta)
+ break;
+ div++;
+ } while ((drate * div) < max_prate && div <= MAX_DIV);
+
+ return *prate / best_div;
+}
+
+static unsigned long _calc_div(unsigned long prate, unsigned long drate)
+{
+ unsigned long div = prate / drate;
+
+ WARN_ON(div >= MAX_DIV);
+ return (!(prate % drate)) ? div-- : div;
+}
+
+/* helper function to register a cpu clock */
+static int __init exynos_cpuclk_register(unsigned int lookup_id,
+ const char *name, const char **parents,
+ unsigned int num_parents, void __iomem *base,
+ const struct exynos_cpuclk_soc_data *soc_data,
+ struct device_node *np, const struct clk_ops *ops,
+ spinlock_t *lock)
+{
+ struct exynos_cpuclk *cpuclk;
+ struct clk_init_data init;
+ struct clk *clk;
+ int ret;
+
+ cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
+ if (!cpuclk) {
+ pr_err("%s: could not allocate memory for %s clock\n",
+ __func__, name);
+ return -ENOMEM;
+ }
+
+ init.name = name;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parents;
+ init.num_parents = 1;
+ init.ops = ops;
+
+ cpuclk->hw.init = &init;
+ cpuclk->ctrl_base = base;
+ cpuclk->lock = lock;
+
+ ret = soc_data->parser(np, &cpuclk->data);
+ if (ret) {
+ pr_err("%s: error %d in parsing %s clock data",
+ __func__, ret, name);
+ ret = -EINVAL;
+ goto free_cpuclk;
+ }
+ cpuclk->offset = soc_data->offset;
+ init.ops = soc_data->ops;
+
+ cpuclk->clk_nb.notifier_call = soc_data->clk_cb;
+ if (clk_notifier_register(__clk_lookup(parents[0]), &cpuclk->clk_nb)) {
+ pr_err("%s: failed to register clock notifier for %s\n",
+ __func__, name);
+ goto free_cpuclk_data;
+ }
+
+ cpuclk->alt_parent = __clk_lookup(parents[1]);
+ if (!cpuclk->alt_parent) {
+ pr_err("%s: could not lookup alternate parent %s\n",
+ __func__, parents[1]);
+ ret = -EINVAL;
+ goto free_cpuclk_data;
+ }
+
+ clk = clk_register(NULL, &cpuclk->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: could not register cpuclk %s\n", __func__, name);
+ ret = PTR_ERR(clk);
+ goto free_cpuclk_data;
+ }
+
+ samsung_clk_add_lookup(clk, lookup_id);
+ return 0;
+
+free_cpuclk_data:
+ kfree(cpuclk->data);
+free_cpuclk:
+ kfree(cpuclk);
+ return ret;
+}
+
+static void _exynos4210_set_armclk_div(void __iomem *base, unsigned long div)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ writel((readl(base + DIV_CPU0) & ~0x7) | div, base + DIV_CPU0);
+ while (time_before(jiffies, timeout))
+ if (!readl(base + DIV_STAT_CPU0))
+ return;
+ pr_err("%s: timeout in divider stablization\n", __func__);
+}
+
+static unsigned long exynos4210_armclk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct exynos_cpuclk *armclk = to_exynos_cpuclk_hw(hw);
+ void __iomem *base = armclk->ctrl_base + armclk->offset;
+ unsigned long div0 = readl(base + DIV_CPU0);
+
+ return parent_rate / EXYNOS4210_ARM_DIV1(div0) /
+ EXYNOS4210_ARM_DIV2(div0);
+}
+
+static int exynos4210_armclk_pre_rate_change(struct clk_notifier_data *ndata,
+ struct exynos_cpuclk *armclk, void __iomem *base)
+{
+ struct exynos4210_armclk_data *armclk_data = armclk->data;
+ unsigned long alt_prate = clk_get_rate(armclk->alt_parent);
+ unsigned long alt_div, div0, div1, tdiv0, mux_reg;
+ unsigned long cur_armclk_rate, timeout;
+ unsigned long flags;
+
+ /* find out the divider values to use for clock data */
+ while (armclk_data->prate != ndata->new_rate) {
+ if (armclk_data->prate == 0)
+ return -EINVAL;
+ armclk_data++;
+ }
+
+ div0 = armclk_data->div0;
+ div1 = armclk_data->div1;
+ if (readl(base + SRC_CPU) & EXYNOS4210_MUX_HPM_MASK) {
+ div1 = readl(base + DIV_CPU1) & EXYNOS4210_DIV1_HPM_MASK;
+ div1 |= ((armclk_data->div1) & ~EXYNOS4210_DIV1_HPM_MASK);
+ }
+
+ /*
+ * if the new and old parent clock speed is less than the clock speed
+ * of the alternate parent, then it should be ensured that at no point
+ * the armclk speed is more than the old_prate until the dividers are
+ * set.
+ */
+ tdiv0 = readl(base + DIV_CPU0);
+ cur_armclk_rate = ndata->old_rate / EXYNOS4210_ARM_DIV1(tdiv0) /
+ EXYNOS4210_ARM_DIV2(tdiv0);
+ if (alt_prate > cur_armclk_rate) {
+ alt_div = _calc_div(alt_prate, cur_armclk_rate);
+ _exynos4210_set_armclk_div(base, alt_div);
+ div0 |= alt_div;
+ }
+
+ /* select sclk_mpll as the alternate parent */
+ spin_lock_irqsave(armclk->lock, flags);
+ mux_reg = readl(base + SRC_CPU);
+ writel(mux_reg | (1 << 16), base + SRC_CPU);
+
+ timeout = jiffies + msecs_to_jiffies(10);
+ while (time_before(jiffies, timeout))
+ if (((readl(base + STAT_CPU) >> 16) & 0x7) == 2)
+ break;
+ spin_unlock_irqrestore(armclk->lock, flags);
+
+ if (((readl(base + STAT_CPU) >> 16) & 0x7) != 2)
+ pr_err("%s: re-parenting to sclk_mpll failed\n", __func__);
+
+ /* alternate parent is active now. set the dividers */
+ writel(div0, base + DIV_CPU0);
+ timeout = jiffies + msecs_to_jiffies(10);
+ while (time_before(jiffies, timeout))
+ if (!readl(base + DIV_STAT_CPU0))
+ break;
+
+ if (readl(base + DIV_STAT_CPU0))
+ pr_err("%s: timeout in divider0 stablization\n", __func__);
+
+ writel(div1, base + DIV_CPU1);
+ timeout = jiffies + msecs_to_jiffies(10);
+ while (time_before(jiffies, timeout))
+ if (!readl(base + DIV_STAT_CPU1))
+ break;
+ if (readl(base + DIV_STAT_CPU1))
+ pr_err("%s: timeout in divider1 stablization\n", __func__);
+
+ return 0;
+}
+
+static int exynos4210_armclk_post_rate_change(struct exynos_cpuclk *armclk,
+ void __iomem *base)
+{
+ unsigned long mux_reg, flags;
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ spin_lock_irqsave(armclk->lock, flags);
+ mux_reg = readl(base + SRC_CPU);
+ writel(mux_reg & ~(1 << 16), base + SRC_CPU);
+ while (time_before(jiffies, timeout))
+ if (((readl(base + STAT_CPU) >> 16) & 0x7) == 1)
+ break;
+ spin_unlock_irqrestore(armclk->lock, flags);
+
+ if (((readl(base + STAT_CPU) >> 16) & 0x7) != 1)
+ pr_err("%s: re-parenting to mout_apll failed\n", __func__);
+
+ return 0;
+}
+
+/*
+ * This clock notifier is called when the frequency of the parent clock
+ * of armclk is to be changed. This notifier handles the setting up all
+ * the divider clocks, remux to temporary parent and handling the safe
+ * frequency levels when using temporary parent.
+ */
+static int exynos4210_armclk_notifier_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct exynos_cpuclk *armclk = to_exynos_cpuclk_nb(nb);
+ void __iomem *base = armclk->ctrl_base + armclk->offset;
+ int err = 0;
+
+ if (event == PRE_RATE_CHANGE)
+ err = exynos4210_armclk_pre_rate_change(ndata, armclk, base);
+ else if (event == POST_RATE_CHANGE)
+ err = exynos4210_armclk_post_rate_change(armclk, base);
+
+ return notifier_from_errno(err);
+}
+
+static int exynos4210_armclk_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct exynos_cpuclk *armclk = to_exynos_cpuclk_hw(hw);
+ void __iomem *base = armclk->ctrl_base + armclk->offset;
+ unsigned long div;
+
+ div = drate < prate ? _calc_div(prate, drate) : 0;
+ _exynos4210_set_armclk_div(base, div);
+ return 0;
+}
+
+static const struct clk_ops exynos4210_armclk_clk_ops = {
+ .recalc_rate = exynos4210_armclk_recalc_rate,
+ .round_rate = exynos_cpuclk_round_rate,
+ .set_rate = exynos4210_armclk_set_rate,
+};
+
+/*
+ * parse divider configuration data from dt for all the cpu clock domain
+ * clocks in exynos4210 and compatible SoC's.
+ */
+static int __init exynos4210_armclk_parser(struct device_node *np, void **data)
+{
+ struct exynos4210_armclk_data *tdata;
+ u32 cfg[10], num_rows, row, col;
+ struct property *prop;
+ const __be32 *ptr = NULL;
+ u32 cells;
+ int ret;
+
+ if (of_property_read_u32(np, "samsung,armclk-cells", &cells))
+ return -EINVAL;
+ prop = of_find_property(np, "samsung,armclk-divider-table", NULL);
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -EINVAL;
+ if ((prop->length / sizeof(u32)) % cells)
+ return -EINVAL;
+ num_rows = (prop->length / sizeof(u32)) / cells;
+
+ /* allocate a zero terminated table */
+ *data = kzalloc(sizeof(*tdata) * (num_rows + 1), GFP_KERNEL);
+ if (!*data)
+ ret = -ENOMEM;
+ tdata = *data;
+
+ for (row = 0; row < num_rows; row++, tdata++) {
+ for (col = 0; col < cells; col++)
+ ptr = of_prop_next_u32(prop, ptr, &cfg[col]);
+
+ tdata->prate = cfg[0] * 1000;
+ tdata->div0 = EXYNOS4210_DIV_CPU0(cfg[6], cfg[5], cfg[4],
+ cfg[3], cfg[2], cfg[1]);
+ tdata->div1 = cells == 10 ?
+ EXYNOS4210_DIV_CPU1(cfg[9], cfg[8], cfg[7]) :
+ EXYNOS4210_DIV_CPU1(0, cfg[8], cfg[7]);
+ }
+ tdata->prate = 0;
+ return 0;
+}
+
+static const struct exynos_cpuclk_soc_data exynos4210_cpuclk_soc_data = {
+ .parser = exynos4210_armclk_parser,
+ .ops = &exynos4210_armclk_clk_ops,
+ .offset = 0x14200,
+ .clk_cb = exynos4210_armclk_notifier_cb,
+};
+
+static const struct exynos_cpuclk_soc_data exynos5250_cpuclk_soc_data = {
+ .parser = exynos4210_armclk_parser,
+ .ops = &exynos4210_armclk_clk_ops,
+ .offset = 0x200,
+ .clk_cb = exynos4210_armclk_notifier_cb,
+};
+
+static const struct of_device_id exynos_clock_ids_armclk[] = {
+ { .compatible = "samsung,exynos4210-clock",
+ .data = &exynos4210_cpuclk_soc_data, },
+ { .compatible = "samsung,exynos4412-clock",
+ .data = &exynos4210_cpuclk_soc_data, },
+ { .compatible = "samsung,exynos5250-clock",
+ .data = &exynos5250_cpuclk_soc_data, },
+ { },
+};
+
+/**
+ * exynos_register_arm_clock: register arm clock with ccf.
+ * @lookup_id: armclk clock output id for the clock controller.
+ * @parent_names: name of the parent clock for armclk.
+ * @num_parents: number of parents in the @parent_names array.
+ * @base: base address of the clock controller from which armclk is generated.
+ * @np: device tree node pointer of the clock controller (optional).
+ * @ops: clock ops for this clock (optional).
+ * @lock: register access lock.
+ */
+int __init exynos_register_arm_clock(unsigned int lookup_id,
+ const char **parent_names, unsigned int num_parents,
+ void __iomem *base, struct device_node *np, struct clk_ops *ops,
+ spinlock_t *lock)
+{
+ const struct of_device_id *match;
+ const struct exynos_cpuclk_soc_data *data = NULL;
+
+ if (!np)
+ return -EINVAL;
+
+ match = of_match_node(exynos_clock_ids_armclk, np);
+ if (!match)
+ return -EINVAL;
+
+ data = match->data;
+ return exynos_cpuclk_register(lookup_id, "armclk", parent_names,
+ num_parents, base, data, np, ops, lock);
+}
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 951bc85..10e0a8d 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -350,4 +350,9 @@ extern struct samsung_clk_reg_dump
*samsung_clk_alloc_reg_dump(
const unsigned long *rdump,
unsigned long nr_rdump);
+int __init exynos_register_arm_clock(unsigned int lookup_id,
+ const char **parent_names, unsigned int num_parents,
+ void __iomem *base, struct device_node *np,
+ struct clk_ops *ops, spinlock_t *lock);
+
#endif /* __SAMSUNG_CLK_H */
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
