On 05/16/14 04:25, Tomasz Figa wrote:
Hi Rahul,
On 15.05.2014 17:04, Rahul Sharma wrote:
From: Rahul Sharma<rahul.sha...@samsung.com>
Enable hdmi for exynos5250 based snow board, exynos5420
based peach pit board and 5800 based peach-pi board.
V5:
1) Moved hdmi_hpd_irq pin back to board files.
2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
to HDMI node.
V4:
1) Removed hdmi_hpd_irq pin from peach-pi board as it already
present in exynos5420-pinctrl.dtsi.
V3:
1) Re-spin on dependent patches.
2) Added patch to enable hdmi for Peach-pi board.
V2:
1) Re-spin on dependent patches.
2) Added patch to remove chip specific hdmi hpd gpio from
board file top SoC file.
This series is based on Kukjin Kims, for-next branch.
It is dependent on
1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power regulator"
at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]
All other dependent patches are already landed in maintainers
tree.
Rahul Sharma (4):
ARM: dts: enable hdmi for exynos5250 based snow board
ARM: dts: change to correct compatible string for exynos5420 hdmi
ARM: dts: enable hdmi for exynos5420 based peach-pit board
ARM: dts: enable hdmi for exynos5800 based peach-pi board
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
arch/arm/boot/dts/exynos5250-snow.dts | 14 ++++++++++++++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 22 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5420.dtsi | 7 ++++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 22 ++++++++++++++++++++++
5 files changed, 69 insertions(+), 2 deletions(-)
For the whole series:
Acked-by: Tomasz Figa<t.f...@samsung.com>
Looks good to me too.
Applied but not for-next yet because need to check the status of the
tps65090 related patches you mentioned...
Thanks,
Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
